Happy owners of new apartments, the inhabitants of housing, which made major repairs and decided to refuse to district heating services, With some care and caution are waiting for the arrival of cold weather. Many people ask the same question. How to turn on the heating in his apartment, if you make all the necessary work on the installation of independent heating myself? Properly connected radiators, will in the future operate normally new, has its own, independent heating system in the apartment?
On how correctly installed new heating system in the apartmentHow to perform the heating installation of the equipment depends on your comfort, the living conditions of the apartment.
The main problem that should be solved by going to its own heating system in the apartment
All maintenance work with elements of the system heating in apartments It should be carried out before the start of the cold weather, when the official heating season not yet begun. It was during this period is the time to engage in the reconstruction of the heating in the house. Lack of coolant in the system central heating will perform off without any problems. Dismantling of old pipes and radiators can be carried out safely disrupt the main apartment building life-support systems. Especially when in the hands of official permission to refuse the services of centralized urban heating and hot water.
How to carry out the replacement of old batteries with new radiators, how to connect the gas or electric boiler. It all depends on how you are technically prepared for such a step. All of these jobs require competent technical solutions, taking into account the seriousness of the problem. Do you live in an apartment house, you are surrounded by strangers. Any defect in the new heating can lead to tragic consequences. The figure shows the ideal scheme auxiliary heating system equipment.
Important! To begin work on dismantling and subsequent connection of a new heating system, it should be only on the basis of the approved project. Any deviations from the design data, neglecting hydraulic calculations and other design data may cause poor performance home heating systems and cause disruptions brownies heating.
Autonomous heating mode is associated not only with improved comfort in his own apartment, but with the increased share of responsibility. To the owners of apartments with central heating bear all care about health of heating boilers, piping functionality. From a technical condition of engineering networks in your home depends on including the comfort of your neighbors. Do not forget about it.
Conclusion apartment of the total energy supply system in an apartment building complex process. Initially, multi-storey apartment house is designed for a centralized heat supply and hot water. All schemes and technological features of the heating system fixed in the data sheet of the building. Any change in view of the individual activities of residents home improvement may violate the existing balance of the entire heating sector. Benefit from the installation of independent heating receive only those owners who have separated from the centralized system. For the rest of the tenants such events can result in trouble. A single complex may start to run rough. Some apartments will be very hot in the winter, while in others the contrary, the battery will be lukewarm.
Do not be amiss to think in advance about the environmental safety. Gas boiler - a unit that needs constant access to fresh air. Included boiler - it is not only pleasant heat and hot water in the house, but also the object of increased danger, followed by continuous monitoring. A working machine must necessarily be equipped with a flue for a normal and stable removal of the combustion products. Special attention is required equipment, due to which the entire system must operate normally and without interruption.
Neglecting such technical nuances, you can not only endanger their own life and health, but also a just cause the anger neighbors, since poor performance of ventilation, chimney or misalignment of the central heating.
Also see: how to carry out the heating in the apartment itself?
Making the heating system with their own hands
Modern gas-fired boilers, which are designed for installation in apartment buildings, have high safety and efficiency. Despite the seeming simplicity of the device, a new boiler requires greater attention. During installation, it is important to achieve a high-quality connection of all systems and equipment in all debug modes. In addition to the equipment you need to have on hand a working circuit-design duct and ventilation system. Only in the complex, with the appropriate technical documentation, you will be able to organize the work of its autonomous heating correctly and competently. Turn on the heat in the apartment - the last step, the success of which depends on the efficiency and accuracy of previous actions.
Here we should remember about the pros and cons of self-heating. You have decided on a radical step, so be prepared for the following:
- you only have to pay for gas consumed for heating the coolant;
- you are free to decide when you should turn it on when off;
- you can independently adjust the temperature balance in the apartment, changing the intensity of the boiler;
- hot water, you will have all year round and with the temperature you set for yourself.
It's all good, but it can be irritating? The following disadvantages, namely:
- hot water may disappear together with the gas supply (which is unlikely);
- failure of the boiler will not only lead to malfunction of the heating system, but will also create problems with the hot water in the house;
- the regular maintenance of gas technology equipment require the owners of apartments with central heating additional costs;
- increased share of responsibility for the integrity and functionality of the heating system, the safety of their own apartments and houses of the property.
Important! The design documentation is the starting point for installation in flat auxiliary heating. The project should be to go through all instances and obtain approval of gas supply. Without an approved project of the boiler and the entire heating system Autonomous execution of the installation is equal to arbitrariness. Failure to comply with the established order of the connection of domestic heat and water supply systems, violation of approved building codes, entails administrative, in some cases, criminal penalties.
If you have chosen a quality modern boiler, then the many technical issues can not worry. Automation, which is now your assistant, regulates the flow of gas. In the case of lowering the level of coolant in the system, or interruptions in the gas supply pipe, namely at automation lies the main task to ensure the safe operation of the entire heating system apartment. If the installation of the boiler, pipework in homes and radiator connection can be made with your own hands, the adjustment is carried out only by experienced specialist, preferably from the gas service.
Main article: When you turn on the heating in apartments?
Turn on the heat in the apartment only after a successful trial run. The absence of faults and leaks in the system, normal operation of the boiler and the chimney, is a signal that all performed efficiently. Independence of residents who refused to district heating ends when you want to enable an autonomous heating system. In the future, it will require not only the adjustment of the equipment, but also the regular maintenance of gas boilers.
On a note: key to the successful and efficient operation of home heating is a regular process service independent heating system. Marking Engineer - gasman in the data sheet of your heating system, relieves you of some of the responsibility for the subsequent operation of the unit.
Making certain conclusions as to turn the heat than can result in non-compliance with technical standards, regulations and standards, it can be this conclusion - to the conversion of his apartment under the heating system should be treated with the maximum share responsibility. Only competent and verified actions, the execution of works in accordance with the design documentation and established regulations, will allow you to achieve the desired effect and complete independence from the centralized supplying heat. Your safety and comfort are now completely fall on your shoulders. Responsibility can be partially divided with a qualified engineer, gas fitter, who will perform start-up operations and will make an appropriate note in the documentation.
