The Russian company TD Technotrade is a manufacturer of high-quality, reliable, efficient and productive for steam ovens brand Kürassier. Lineup of the brand hit the market in 2009 and now is popular, worthy of competing for the consumer with sauna stoves from foreign manufacturers. Furnaces Kürassier combine strength and quality, and therefore can become a source of heat and steam for baths and saunas - the model capable of generating hot air as dry characteristic for saunas and wet, which is used bath procedures.
Types Kürassier furnaces
Lineup of this brand includes the following models:
- Cuirassier;
- Sweden's cuirassiers;
- Kürassier Finka;
- Kürassier Corbis.
The most popular are considered Swede and Fink - they are not knowingly have attracted lovers of baths.
- Kürassier 15 Swede. Has in its structure two doors that allow you to use the stove from both the steam and of the changing room. Such furnace bath solve the problem of air burning in the steam due to the fact that the main fence oxygen combustion occurs outside. This model is equipped with two glass screens - a panorama door to the waiting room and a viewing window in a pair. Swede is ideal for small baths 6-24 m³.
- Kürassier 10 (15) (20) Fink - such furnaces for saunas and baths are used for heating steam size 12-26 m³ respectively. With such a setting bath is heated to the required temperature very quickly. Most heater will provide the optimum moisture content, uniform heating of the room, with a roomy firebox does not require constant human presence there. The furnace is heated entirely of steam, rapidly melts and is long enough in working order. The design allows steam generator supplemented Fink or economizer which increases the volume of the heater and provides a unique environment.
Design features of furnaces Kürassier
The main features of the model Cuirassier - high heat transfer efficiency due to special heating equipment. One of the key aspects of the combustion process in the furnace is afterburning combustible gases. During the combustion of firewood is allocated to 35% volatile hydrocarbons. In a conventional furnace of bath they immediately leave the furnace through the pipe. The structure of the model allows Kürassier afterburning these hydrocarbons to exit from the pipe, thus the smoke gives all its energy potential, and the room gets steamy additional degrees. Reburning gas is carried out by double oxygen supply system through the ash box and the nozzle front screen at the rear of the unit.
Related article - the types and types of furnaces.
Nonlinear allows smoke flue collector located in the furnace longer to pass through the heater and to give it the maximum amount of heat.
Beam grate made in the form of individual elements are not related with each other. The point in the heating furnace is never uniform: in one place combustion stronger in another weaker. As a result, the beam is heated, are set in motion and the self-cleaning of the ashes, freeing access to the flow of oxygen.
Additional oxygen loop, which extends around the outer edge of the furnace heats the air passing therethrough twice as fast. The capacity for the stones has additional openings.
Pour the stones in the heater is not possible due to the small inclination of its bottom. Water flows in one direction, accumulates there and gradually evaporates, creating a soft, moisture in the steam room.
Chimney pipe is made of stainless steel sheet thickness of 1.5 mm - it is set to the maximum heating zone.
For the manufacture of furnace used steel sheet of 3-6 mm thickness, the flue collector and deflector - 6 mm. Durable, heat and corrosion resistant material of which holds equipment provides its reliability and durability.
And the number of additional features that do not directly affect performance, but increase the ease of use, it may be noted:
- the opening direction of the doors can be changed, outweighing the veil;
- minimum number of seams in the furnace provides additional security unit;
- due to the installation of the adjustable feet can be put on any surface.
Advantages and disadvantages of equipment
Such plants need to heat with wood, it is better if they are made of hard wood. But the quality of the wood is no special requirements - you can even lay the damp wood, because coming into the furnace of hot air will dry them without problems. kindling You can use wood chips. Wood in the furnace is necessary to lay with the mandatory presence of a free space for the combustion is at least 20 cc. It is important not to overheat such models because of the excessive heat load of equipment components can be damaged.
If necessary, bring the furnace to the street, from there you will be kindling. In any case, care must be taken to outdoor pipe is not located too close to the wall - in the presence of flammable materials arrangement of additional shielding and protection required.
Kürassier oven designed for home use only and not suitable for commercial purposes on an industrial scale.
Operating conditions furnaces for baths and saunas
- When installing the furnace in a log bath obligatory preliminary preparation. The base on which will rise heating equipment, must necessarily be in the form of a concrete podium. The walls are protected from exposure to elevated temperatures brickwork layers of insulation material and iron. This layered protection makes it possible to protect the wood from the temperature 150ͦS.
- If the oven is to stand in the same room, and the furnace - in the other, it is also necessary to perform insulation hole in the wall between the rooms.
- water heating coil is not provided as standard, to be set, such detail will have to be ordered. If you plan to heat the water in a separate container, it is necessary to order the flow type heat exchanger for economical water heating.
- After completing installation work, installation of furnace connected to the chimney. Mandatory requirement: the chimney must be equipped with spark arresters.
- It is necessary to avoid heating the outer surface of the hot. To reduce the combustion intensity and, therefore, close the ash pan to lower the temperature, then the flow of oxygen reduced. This must be done when the temperature in the steam ceases to be comfortable. If you do not follow this rule, the installation of the service life is reduced. He may fail sooner than finish warranty, and if misused manufacturer declines all its obligations.
Observing all the rules of operation, you will extend the life of your furnace of bath, save the family budget and get the opportunity to enjoy excellent long bath. The manufacturer guarantees the service life of furnace systems at least 12 years.
