How to mount PVC panels to the wall 75 photos examples

Plastic panels - the material for quick and efficient, but at the same time, good-quality and spectacular decoration. Exceptional practicality, ease of mounting and unlimited decorative possibilities it provides the high demand and the "open access" in the most different corners of the house.

Advantages and disadvantages of wall decoration panels

The panels are made from polyvinyl chloride, a starting material by running through certain shape. Molten PVC after cooling is transformed into a light and durable sheet that consists of two plates interconnected by webs. Compounds are ribs and sipe impart strength. This design allows you to keep the low weight of the sheet and provide it with maximum flexibility. Inside the panel voids - sections, which reduce thermal conductivity and improve sound insulation. These products belong to the category section. When fixing material purlin becomes possible to mount additional insulation layer.

PVC panels are endowed with number of advantages, among which:

• unlimited possibilities of decoration - modern technical devices can provide on consumer choice a huge variety of panels of various colors and with different prints and invoices;
• reasonable price - in comparison with tiles, granite, artificial stone;
• simple installation - you can do without the involvement of specialists, expensive tools, and the performance of work is not formed construction dust;
• long service life - panel cladding retains the original appearance throughout the entire period of operation;
• absolute immunity to moisture - steadfastly maintained water "attack", protect the walls from getting wet, from the mold and the spread of the fungus;
• easy maintenance - panels are easily washed using conventional detergents.

Disadvantages plastic trim

1. During combustion PVC will evolve toxic toxic substances. It is for this reason it is not recommended to use in a residential area.
2. A sharp temperature drop can cause damage to the material.
3. Low resistance to mechanical damage. However, spoiled lamella can be easily replaced. For this purpose, it is desirable to have in stock sheets from the original bulk, ideal color. If such material is not available, you can buy a few pieces of contrasting and re-design.
4. Instability to UV rays.

For exterior applications need to use panels with a special coating that prevents colors fade in the sun and change color.

Kinds of PVC panels for walls

Plastic panels are divided into groups by type of construction, the nature of the compounds, coloring and texture of the surface intended.

All PVC coating can be divided into two main groups - sectional and sheet.

Representatives of sectional panels

• Lining - long and narrow plastic slat with a length of 3 m and a width of 10 cm. It provides wide lock;
• "Polka" - differs from the previous version of the narrower locking system;
• Extended plates - with length of 3 m, the width "boards" may be up to 50 cm;
• reinforced slats - are characterized by having a double profile, and therefore has high strength and resistance to corrosion.

sheet

• tiles - detail square shape without lock;
• sheet elements without locking system. Length can vary from 1.5 to 4.05 m, and a width from 80 cm to 2.03 m.

In addition to size, the panel compounds differ in type

• seamless - fit a single flat blade, ideal for lining the ceiling and walls;
• bevelled - at the ends of the panels has a bevel. When mounting recess formed in the ground strips compound;
• with a relief surface - are characterized by high resistance to wear.

Thanks to modern technology and plasticity of the material is possible to produce panels with the different textures. It can be embossed imitation of mosaic, wood, stone; volumetric geometrical figures - and futuristic traditional designs, plant elements.

Variety registration smooth panels is amazing. Glossy and matte, plain and decorated with prints, photographs, mirror, gold-plated - the design possibilities are unlimited today.

By appointment panels are divided into wall and ceiling. In recent manufacture using thinner plastic sheets. This allows you to minimize the weight of the cladding, but makes it more fragile. Therefore, to mount such panels have to with great care. The walls need to be more robust, thickening of the coating, so it is a more weighty, but to withstand certain mechanical effects.

How to choose the right panel

Panels on sale a lot and make the choice easy. It is recommended to start from the room type that you intend to decorate.

If it is a bathroom or toilet, prefer a smooth moisture-resistant materials. Relief surface is more difficult to launder. They may appear calcareous sediments that will be impossible to clean without the help of aggressive chemicals. And this will cause irreparable damage to the appearance of finishing.

For corridor suitable solid impact-resistant materials, as frequent contact with the walls in a small space is inevitable. Where appropriate textured surface - imitation leather, wood or natural stone. On a non-uniform coating of small scrapes and scratches are not visible.

durable wear-resistant panel suitable for balconies or terraces. It is better to use smooth strips. They were much easier to look after than for rough. And the dust on the balcony always abound. In order to neutralize the effects of UV exposure, it is better to choose light shades slats.

In the living room there are no such problems, besides smooth plastic strips can reduce the cost of the interior of this room. Therefore, there are appropriate texture 3d panels, as showy composition accent wall.

It is important to pay attention to the quality of the finishing elements. Check products in the presence of chipping, deformation, the number of cells within - depends on the strength of plating, the quality of the tool joint.

Materials from different batches can vary in shade. Therefore, this point should be clarified in advance.

settlements

Known saying - "Many - not enough" in this case is irrelevant. Of course, the better the excess, than a shortage of panels, but also to pay for the extra materials to anything. The excess should not be more than 10%. Otherwise, in the end, to the chagrin of the irrationally spent finances will be added concern for the need to store or get rid of unwanted slats and profiles.

When calculation includes the necessary elements for:

• frame - the number depends on the position of the panels - vertical or horizontal. crates rack mounted perpendicular to them. Step between the posts 35-40 cm;
• fasteners - dowel-nails should be fixed at a distance of 35-50 cm. The required number of klyaymerov per square meter - about 25 pieces;
• lamellae - wall area divided by the area of ​​the panel. The result is the desired number of strips. The number of sheets in the form of tiles is defined in square meters;
• Additional elements - for determining the right amount of moldings, calculate the perimeter of the room, take into account the number of internal and external corners.

plastic panels mount technology

There are various options of PVC wall cladding panels.

1. Binding to preformed crate;
2. Fixing directly on the wall with the help of liquid nails. The surface in this case should be perfectly flat and smooth.

Tools and materials needed

Depending on the technology of work may be required:

• drill with a hammer, drill and drills of various sizes;
• screwdriver;
• set of screwdrivers;
• staple gun;
• screws, klyaymery and other consumables;
• level;
• nailing gun for liquids and silicone sealant;
• Construction knife;
• finishing material and components.

The materials used for sheathing

For the arrangement of batten use different materials. The frame is made of wood, metal or plastic elements.
options crates

1. Wood - going from wooden slats. The bars must not be damaged. From damaged should be abandoned immediately, warning the likelihood of structural failure. Reiki should be treated with an antiseptic composition to prevent rot and infestation by bark beetles.
2. Plastic profile is not afraid of dampness and mildew. There are several types of these fasteners. Distinguish starting U-shaped, F-shaped, H-shaped profiles and angular - for internal, external angles and versatile. For reference hardware designs use plastic slats.
3. Metal profiles - frame is made on the same principle as for plasterboard. It has the largest carrying capacity, durability.

The marking of walls and installation of lathing

Before proceeding directly to the creation of the framework, it is necessary to partition walls. Initially, it runs the scheme on paper. This step allows you to accurately calculate the amount of material and fasteners. Then, drawing is transferred to the wall. Partitioning structure helps to build high speed and with maximum accuracy.

Step by step instructions creating a wall frame

The process of mounting a wooden batten comprises the steps of

• installing vertical posts;
• fixing cross rails;
• extra vertical stiffeners - as necessary;
• additional structural reinforcement sealant.

Wooden crate - great for dry and often ventilated rooms. For wet areas more appropriate frame of aluminum or plastic profile.

Metal lath suitable not only for fixing the sheet materials - conventional plasterboard, gypsum fiber board, fiberboard, chipboard, MDF, but also for plastic slats. It allows you to maximize hide irregularities of the walls and ceilings.

The first step is securing the upper and lower, then the vertical guides. These elements are closely aligned with each other. Install transverse horizontal parts. When headliner, guides are hung via U-shaped brackets. The height of the suspensions is aligned with the level.

Guides plastic crates mounted exactly perpendicular to the direction of the decorative laminate. Otherwise fasteners - clips were not be able to snap and hold the panel effectively. The distance between the profiles - 30 cm.

Mounting and installation of the slats moldings

1. Install the corner element with grooves for the panels.
2. Attach the floor and ceiling moldings.
3. Vymeryat height of the first panel, with the depth of the grooves baseboards and cut it with a knife construction.
4. Insert the first panel in the corner of the narrow slots of the castle side.
5. Fix with staples or screws from the side of the wide flange for mounting.
6. Subsequent strips inserted into a narrow shelf in the groove of the previous panel, the most densely combining parts.
7. Last lamella firmly set between the previous strip and the final molding. If it does not fit, the excess part of the cut.

Fastening panels using glue

If the wall surface is flat, you can do without crates and save space and money for the purchase of materials. In this case, fastening is made on the "liquid nails". Their composition must not be a solvent that "eats away" plastic.

Preparing walls

In this method, the lining, the preparation of walls need to be handled with great care. Surfaces should be cleaned to remove any ridges and bumps, apply antifungal primer. It may require an additional layer of putty to create perfectly smooth base. Then you have to wait for the complete drying of the wall.

To save money, buy plaster already dissolved in it anti-fungal agents.

Pasting

Pasting occurs in several stages

1. On the wall with a special glue gun is applied. Coverage should not exceed the size of the two slats, as the liquid nails quickly dry up.
2. Set area.
3. Assembled wall panels - the first is inserted into the groove of the angular profile and is pressed to the ground. Unacceptable strong point is pressed - you can overdo it and do crack. Further lamellas glued one by one to complete the fining area.
4. Finish fixed molding.
5. Mounted decorative accessories - floor and ceiling moldings.

For some rooms suitable wall decoration panels made of PVC

The main advantages of plastic - moisture resistance and easy care. These features are especially valuable for areas such as the bathroom, bathroom, kitchen - where there is high humidity and there is the possibility of persistent contaminants. It directly concerns the sections of the wall above the bath and sink, working in the kitchen area, toilet partitions. PVC panels will save the walls from getting wet and mold, and to wash them is not difficult.

In accommodation, the walls have to breathe. Therefore, do not completely cover them with plastic in the living room, office, bedroom, nursery. Finishing PVC panels may be present only in their interior in the form of separate fragments.

In the hallway, because of increased resistance to abrasion, a plastic coating will be fitting. However, it is better to abandon it in the gate area, as in fire toxic emissions may block the path to salvation. This is especially true for narrow corridors.

Panel - excellent material for finishing the loggia or balcony. Sheathe a small room can be with their own hands. One day of work and a neat and aesthetically pleasing interior of your services. In choosing the material necessary to consider the possibility of discoloration from direct sunlight and to confine light, neutral shades. However, if the balcony glazing is endowed with solar control properties, the risk of burn-out colors disappears. Maintaining original appearance will not be difficult, because the coating is easily washed. Therefore, take care of them will be easy.

Application of PVC panels allows to update the interior quickly and inexpensively.