The original bracelet will add an image to make the image unique. It is easy to make it with their own hands. To do this, you need only to buy the tape and find the branch of a tree with a diameter slightly larger than 1 cm. Instead of tapes, you can use an ordinary piece of fabric.
Content
- How to make bead - Secrets optimal form
- Beads with two, three holes
- Beautiful shape and design - how to make your own hands?
- Cut heart - beads with a hole for the belt
- The most successful color ribbons
How to make bead - Secrets optimal form
Favorite branch should be cleaned of bark and cut into pieces slightly larger than they should be beads. To do this, use a saw with a fine thread. It can be done in each bead two holes in the buttons. But in this case, the form of all wooden elements must be original. Otherwise they will do everything to make for buttons.
By adjusting the distance between the two holes can produce the desired effect, the probability of analogies to nullify. Three or four holes can also be drilled. Too close to each other they have the dangerous - there is a risk that the bead crack. It is possible to increase the distance, to give it shape:
- stars;
- leaf clover;
- bow;
- flower;
- clouds;
- sun with wavy rays;
- slices of cheese, spotted by holes of different diameters, and so on.
Another technique - coring, hollow inside classical bead. It can be fanciful, if selected branch with a diameter greater than 2 cm. The works will be added, the problem is a little more complicated.
Beads with two, three holes
The easiest way would be to make two holes in the workpiece with a small thickness. You will need:
- hammer;
- nail;
- awl or needle gypsy.
By driving a nail and pulling it gently, you can achieve the desired effect. If there is a risk that the blank is split, it is necessary to use a needle and an awl.
Beautiful shape and design - how to make your own hands?
Should be applied to the workpiece marking, using drawing stencil or by hand. This will help to avoid mistakes. Shaped workpiece with a knife or saw. If you cut the brink of the beautiful abstract rhombus need Saw - a knife to make a clean cut is much more complicated, we are talking about small details. With it, and with the aid of sandpaper can be all perfectly smooth surface, it is more important application.
Fragile product bead requires delicate handling. It is not advisable to apply pressure on the saw at work.
Cut heart - beads with a hole for the belt
Volumetric beads in a bud of rose, abstract cube faces imply the creation of holes - in this case of the tape edges does not hide the pattern. To this drill hole, the drill is not necessary, however, you can buy mini drills with different attachments - this is the tool that will simplify the process will accelerate. He has been specially created for fans of Hand Made, working with wood and not only.
To remove the core, you can use an awl - gradually cut extra wood fiber. If you use a nail in this case, it will be more difficult to pull out, the likelihood is high that the bead crack.
The most successful color ribbons
All the beads may be coated with a varnish for wood, pre-polish them with sandpaper, paint them in any color - it is important to avoid uneven application of the dye.
Tape of any color will do. It is desirable to select variant nonspottable avoid white - necklace, bracelet will have to once every couple of days to clear from everyday pollution. If the tape is selected dark, it will have to do a little less.