For self-production of this mini-guns do not need so many things, and at least fantasy. Find the necessary attributes easily. But keep in mind that even the smallest and seemingly harmless mini gun can be harmful, so the experiment should be only in the presence of adults.
Content
- Shooting Kinder Surprise
- Decorative gun
- simple crossbow
Shooting Kinder Surprise
You need: 2 lighters, eggs from Kinder Surprise, glue gun. When all items on hand, follow these steps:
- Pull out the lighter benzoelement, attach a piece of wire with electrical tape.
- The egg of Kinder surprise drill hole.
- Housing ordinary ballpoint pen, a little sawed-off on both sides, insert into the hole prosverlonnoe eggs.
- Glue gun secure elements.
- Bottom to do a small hole for the wire, which was attached with tape or duct tape.
- Laterally pierce the second wire.
- Open the egg and put a little lighter gas.
The cannon is ready. The main thing - do not forget the bullets. They can be made out of foil.
Decorative gun
If you need a gun for the interior, it is better to cut the wood. There fabrication scheme simple and original cannon from the traffic jams. You will need:
- two corks from wine bottles;
- toothpicks;
- awl;
- screwdriver or knife.
Cut one stopper into four parts. Leave two of them: they are the wheels. Toothpicks make holes in them. Another bottle cap need to make a small hole with a screwdriver or a thin knife at the top. Awl should pierce through hole for the wheel stopper or 1 cm, slightly closer to the fuse of. Further, in the wheel to insert small sticks made of toothpicks, and attach them to the gun from the different sides. If a large plug was pierced through and through, it is possible to thread the floss it completely, then put on wheels. If necessary, trim. From this gun can shoot, if you make a fuse.
simple crossbow
You can also make a weapon out of the can and a lighter. You will need:
- Bank of plastic;
- glue;
- metal tube;
- Piezo lighters elongated metallic end;
- small plastic balls.
First you need to drill a hole in the bottom of the jar, insert the end of the lighters and secure with glue to avoid crevices. The banks also cover make a hole and secure the pipe. Give the glue to dry thoroughly. Insert ball with the inside of the cans into a tube, tighten the lid. Send the gun in a safe place and press the lighter button.
If the weapon does not shoot, you need to check if the glue holds well and there are no gaps.
Another original object - shoot syringe. The following attributes are necessary for him:
- gas-burner;
- a syringe without a needle;
- foil;
- glue gun.
At the bottom of the banks need to make a hole with a diameter of the burner tip. Burner inserted into the cut-out banks. Glue gun go well at the interface between the jar and the burner to the gas does not come out. At the tip of the syringe barrel cut and thread the cans from the back side, also sealed. foil need for ammunition. Her need to crush, to get small balls. The gun can be charged by one. When the first tests are complete, you can add more balls.
If there was a desire to shoot, it would be nice to build a mini-shooting range with his own hands, it is desirable to target. You can even arrange a competition with your friends.
For such entertainment not necessarily to buy expensive props. All parts for the manufacture of weapons available to everyone.
