The dissolve silicone sealant in the home: the ways and means

If you need to dissolve the silicone sealant, it is important to know how to properly and how it can be done. To begin with information about what is strictly forbidden to dilute - is toluene. When interacting with silicone generate hazardous chemical compounds that cause severe poisoning organism.

Removal of different types of sealants

The most effective way - is, of course, special solvents. But their choice is so great that a simple man in the street it will be difficult to understand exactly what he needs. silicone solvents are in the form:

1. Liquid.
2. Paste.
3. Spray.

What type you choose depends on the individual case. There is a sale and special Silicone remover, Which is made of organic diluents. It has a number of advantages, as it can be used at different temperature indicators. Wash does not lose its properties even after freezing and thawing, so keep it a lot easier.

If you read the sealant composition of solvents, it becomes obvious that it's different. How do you know which one to choose? The fact that the silicone also has more than one version of the chemical bases. This is made for use in different environments and on different surfaces. here main types of sealants:

• Acid. The most common and cheap. Manufactured based on acetic acid. It very much felt at work, as covered by a strong smell of vinegar. These sealants have limited application. They enter into chemical interaction with non-ferrous metals and their oxidized. And also it is not recommended to use them with materials containing cement, as an alkaline reaction.
• Neutral. They are much more expensive, but also more universal. Made, usually alcohol-based. When using no pungent smell. May be employed with any metal, without fear of oxidation. C cementitious materials problems, too, will not. Have improved water resistance, so they are used even in shipbuilding and aircraft building.
• Alkaline. Uzkoprofilnye sealants amine-based, in the home are not used. When the release smell of stale fish. Purpose - work with nonferrous metals, marble, as well as materials containing cement.

When the composition studied acquired the appropriate chemical properties sealant solvent. The dissolution process is in a prepared container. It is important to do everything in a dry place for the best effect. After the mass institutions are biding time specified in the instructions of the solvent, as a rule, up to several hours. It should be noted that the silicone does not become completely liquid. It will be a jelly-like form, as a paste.

Acetic acid

It is important not to be confused with the vinegar, which, in fact, have acid diluted to the desired concentration. Suitable as a solvent for the acidic silicone. If you ever had to plant wallpaper adhesive, here the principle is similar. The sealant slowly poured acid all this stir. This is done until then, until you get the desired consistency.

Petrol

Those that are not sold at gas stations and in commercial and DIY stores. Represents ideally refined oil with a higher octane gasoline than simple. Moreover, the octane number is not constant and varies a little. Suitable as fuel for cigarette lighters.

Prepared container, which will be liquefied silicone. As it is squeezed out sealant and slowly pour gasoline which will dissolve the contents to the "sour" state.

silicone oil

Suitable as lubricant and clean the silicone. To thin the need to observe proportion. Per share of oil or grease is added six silicone shares. everything is mixed to obtain a homogeneous substance. The advantage of this method is that after the transition to the liquid state silicone does not lose its original properties.

White Spirit

To get home liquefied silicone sealant to the alcohol-based, suitable and conventional mineral spirits. To start chosen the right size bottle. The solvent is poured into it. Thereafter, the tube is extruded from silicone. Closed bottle and shaken for five to ten minutes. If necessary, add a little white spirit or sealant, it all depends on the desired consistency.

Handling Precautions

It is important when working with solvents and silicone observe safety. Be sure to wear:

1. Gloves (latex or should be of a sufficiently dense rubber, otherwise they simply will corrode the solvent).
2. Respirator (chemical vaporization harmful to the human body, often have a pungent odor, it is particularly important when working with acidic silicones).
3. Special goggles (available at any hardware store) will protect against the ingress of substances into the eyes.

The clothes should be tight and close on the skin to the maximum. Work should be performed in a dry room. At the end should be a few hours to ventilate the room.

Now the answer to a question than to dilute the silicone sealant is obtained. It remains to use the advice given above, and the problem will be solved.