How to clean iron at home: ways and means for cleaning the soles of a deposit

With prolonged use on the soleplate fouling appears, and in the water reservoir is formed scum. This greatly complicates the use of such an important household appliance, because when ironing a deposit does not allow him to glide of tissue that makes additional efforts and, as a result, spend more time on this home work. Besides traces of soot and sludge, which can go together with the steam, sometimes remain on things.

That things have not been spoiled at the crucial moment, it is better to take care of the purity of such an important household appliance. that clean iron at home, and not only its sole, but also to remove limescale inside the body, there are several effective methods.

methods of cleaning

Before proceeding to clean the iron at home to keep in mind that clean the soles of the device with sharp objects or sandpaper strictly forbidden.

Such methods only scratched polished surfaceThat manufacturers specially made very smooth to ensure the best glide over the fabric.

Any attempt to clean the soleplate mechanical methods can make the device unusable. Therefore it is better to use more sparing techniques.

Abrasives:

1. Salt and hot iron. On heavy paper or newspaper to pour fine salt, flatten it. Iron is well heated, and then very gently hold the sole of the layer of salt, as if to stroke her. Nagar starts to come off, what would testify darkened salt crystals.
2. By salts can add finely grated paraffin candle. This will make the cleaning process more effective. This method is not suitable for irons with teflon coating.
3. Salt and cool iron. This cleaning method is similar to the previous one. Salt poured on thick paper, but it is necessary to drive on a cold iron. This should be done again very carefully to avoid scratching the sole unit. Darkened salt would mean that cleaning is successful.
4. Matchbox. To clean the soles of burning can use conventional matchbox. It is better that he was new, because the new layer of sulfur is not damaged. Next, it is necessary to heat the appliance and clean it with sulfuric band matchbox.

Chemical agents:

• Pencil for cleaning iron. Pencil for cleaning iron of a deposit is sold in hardware stores. It is very easy to use. It is necessary to heat the device and gently but carefully handle the entire sole of this pencil, then wait until the vehicle will work well to iron and lint-free cloth to come down a deposit.
• Ammonia. This method is used in a well ventilated area, as there will be a strong unpleasant smell. Well-heated iron wipe soaked in liquid ammonia useless rag.
• Hydrogen peroxide. Here again, it is better to clean in a ventilated area. The surface of the sole unit wipe cloth soaked in hydrogen peroxide.
• Baking soda. Dissolved in water baking soda. Wettable soda solution in a cotton pad or cloth and wipe them cold soleplate. After cleaning wipe the surface of the grout with a damp cloth and then dry.
• Gidroperit tablets. Using this method, it is necessary to take into account the presence of a strong odor. Tablet gidroperita need to rub the hot soleplate of the device, wait for the reaction, then unnecessary cloth carefully wipe the soles of gidroperita residues.
• vinegar. It is a popular means for cleaning many difficult contaminants applicable to purification of iron fouling in the home. To do this, moisten with vinegar piece of old cloth. Then wipe the contaminated instrument sole.

Vinegar evaporates quickly, so you need as much as possible often re-wet the cloth. If the result is satisfactory, the iron must be heated and purified by ironed wet tissue, and after dry.

domestic funds

For the first method, in addition to iron and paraffin need some sort of pan. A piece of candle wax and candle need to be wrapped in cotton cloth.

The pallet should be heated vertically to keep the device, this will help avoid wicking of paraffin into the holes on the soleplate. then gently Grate the hot surface of the sole our paraffin pencil.

During cleaning the molten wax will flow into the sump with fumes. Upon completion of the work should be thoroughly cleaned iron to iron the fabric unnecessary to remove wax residues.

To clean the soleplate with the help of soap, you need to warm up the iron and then carefully rub the sole of soap and turn it off. When the device is cool, wash with water, soaped surface.

On the sole of the household appliance must be applied to any toothpaste. Then turn it on and ironed unnecessary tissue, thereby removing and toothpaste, and fumes from the soles. To cleaner does not beat in the hole for a couple, you can enable stripping.

Limescale within the housing

Clear iron from scale in the home it is possible and does not require much effort. But any hostess that owns the device with the function of stripping, and faced with another problem - scum inside the housing.

Self-cleaning device - ethe easiest way device descaling, as a self-cleaning function is in many modern irons. How to use it properly is described in the instructions for household appliances. But usually, the following actions.

The instrument necessary to pour water reservoir up to the "maximum" mark at the same set temperature controller. Then heat the iron, allow to cool, and heated again.

Tilt it over the tray and push button self-cleaning. The result of these actions, all the scum out of the unit through the holes on the bottom with steam. After cleaning device several times with clean water.

Lemon acid

Reconstitute with hot boiled water sachet of citric acid. After complete dissolution of the powder fill solution brushing device.

Further, the device need and enable good heat. After that, several times enable stripping.

Then pour the residues of acid solution, replacing it with boiled water and repeat the steaming. Again slitostatki water. Now the appliance can be safely used.

Using the "descaling"

Popular cleaner Dummies can help in cleaning the iron from scale. This tool is sold in hardware stores. It easily and efficiently can clear the scale inside the device.

Its only drawback - it is a long time not erode odor. Because to use them better in a ventilated room. After cleaning "descaling" household appliances should be well washed with water.

Carbonated mineral water

The secret of success of this method is that the composition of carbonated drinks have acid that can dissolve the pellet in the iron. Mineral water to pour into the water tank and nagretpribor, then enable stripping function for removing limescale.

Cleaners for the bathroom

Popular means of purification from lime deposits in the bathroom, for example, Cilit, can also be used for the purification of iron from scale at home.

For effective cleaning, it is required to flip up and gently soles Pour solution into the hole liquid. Leave the iron in the inverted state for 20 minutes, then thoroughly rinse the device under running water.

any problem prevention is betterThan to solve it later. Because you should not neglect a few simple rules:

• when you buy iron to carefully read the instructions in it, manufacturers indicate it nuances in the operation of each model;
• monitor the temperature modes for different kinds of fabrics;
• after each use of the device to wipe sole wet cloth, and it is necessary to periodically clean from scale;
• Clean the appliance should always be cautious, so as not to scratch the surface of the sole.

These simple rules will allow the domestic appliance for a long time and efficiently carry out its functions.