Hose for connection of a washing machine

The water inlet hose for the washing machine is simply necessary. He not only takes part in the work of household appliances for washing, but also ensures the safety of repairing your home and neighboring apartments. In order not to let the consumer down and not become the cause of the "flood" in the apartment, the water inlet hose must meet a number of stringent requirements. The main characteristics of this element of the complete washing machine, we'll talk in this article.

to the contents ↑

What is a filling hose?

This important part of the installation of washing equipment is a polyvinyl chloride tube reinforced with reinforced yarn and nylon braid. This structure of the hose makes it possible to rely on its strength, because the design can withstand high water pressure and has a high resistance to tearing. The ends of the device are reinforced with metal sleeves, from which nuts and fittings are visible. One side of the tube is connected to the water supply system of an apartment or a private house, and the other to a washing machine.

Important! Fittings and nuts are made of plastic, so that they do not crack, they need to be twisted by hand.

Each product is marked with numbers that indicate operating temperature and pressure.

Important! The inlet hose of a standard sample can withstand a pressure of 4 bar.

This design is the most common. It is these tubes that come with the washing machine. Typically, the length of the product is limited, so if you need to install the machine at some distance from the water pipe, you will need an increased length of the hose that is purchased separately and can be up to 5-6 meters long.

Important! If necessary, the length of the filling tube can be increased by connecting with a special connector of several hoses. To prevent leakage, the connecting points are sealed with a FSM tape. However, in view of the reduced reliability, it is better not to use such a tube.

to contents ↑

Types of hydraulic hose

The hose for the washing machine can be of several types:

• With fixed length( 1-5 m);
• In the bay( length up to 10 m);
• Telescopic( length increases due to corrugated wave);
• Aqua-stop( with the system of protection of the washing unit from leaks).

to the table of contents ↑

Water hose for washing machine with Aquastop

This type of connection tube deserves special attention. Conventional products can break during the supply of water to the washing machine under high pressure, while pouring all the water. The hose with the system "Aquastop" has a slightly different design, preventing the occurrence of a similar problem.

Important! A filling hose with such a system can withstand water pressure up to 70 bar.

The device consists of two pipes, one of which enters the other. Between the pipes is laid special material, which, due to the influence of water on it swells and triggers the safety valve. The latter in this case blocks the flow of water.

Important! In cases where the washing machine picks up water in the off state, the hose with the Aquastop system will not prevent you from leaking.

A similar system operates as follows:

1. Under normal operating conditions, water flows through the main inner tube.
2. In case of damage to the hose( slow leakage or breakthrough), water begins to contact the interlayer between the tubes, which then swells.
3. Water is blocked by a safety valve and does not leak out. Thus, the floor in the room remains dry.

Important! Even if the tube breaks right at the entrance, still the water will not flow to the floor surface, but will be collected in a special pallet located below the washing machine, which is equipped with a sensitive float. When water appears, the float rises and closes the contacts of the microswitch.

1. The "Aquastop" system in some models has an emergency pump that pumps out water if the emergency valve does not work.

Important! It should be noted that the filling hose with the "Aquastop" system in the event of an accident only works once. After operation of the system, the handset must be completely replaced.

Such models of jets are much more expensive than classic samples, but the protection from leaks, which they give, is more reliable.

to the contents ↑

How to connect the water inlet hose to the washing machine?

• First of all, it's worth taking care of the sidebar in the water supply. In this place is placed a tee with an overlapping tap.
• The nut is screwed to the tee with a plastic fitting.

Important! A straight fitting is connected to a tee with a faucet, and a curved fitting to a washing machine.

• It is recommended to install an additional mechanical filter along with the sidebar. It will complement the work of the mesh already standing at the entrance to the unit. Due to this, the washing machine will be reliably protected from water pollution.

Important! The filter is installed in front of the hose, after the tee.

to the table of contents ↑

Popular manufacturers of hydraulic hoses

The manufacturer selects the complete set of the washing machine with connecting tubes. The type of washing machine depends on the type of hose. Consider the most popular and popular options.

Electrolux( Sweden):

• This filling hose is equipped with the "Aquastop" system;
• Withstands temperatures up to 900 degrees;
• The maximum allowable pressure reaches 90 bar.

Reflex( Italy):

• Double-layered tube, which has additional protection against leaks;
• The maximum pressure that the tube can withstand is 20 bar;
• The limit of the permissible temperature is 250 degrees;
• The tube has nuts in the design that prevent unwinding of the product.

Scanpart( Germany):

• Withstands pressure up to 90 bar;
• Used for cold water supply.

CODO( Russia):

• Has a metal base;
• The tube design has an additional metal sleeve.

Cotali UDI-Black( Italy):

• The operating temperature reaches 1000 degrees Celsius;
• The maximum allowable pressure is 80 bar;
• The throughput is 43 liters per minute;
• The product set has 2 gaskets with ¾ thread.

It's impossible to tell which of the above models is better. It is always worthwhile to choose a filling hose, based on the specific situation and type of washing device. For example, if you have high water pressure, then you need a tube that can withstand it.

to the contents ↑

Drain hose for the washing machine

This hose, as well as the filler hose, comes complete with a washing machine. It is necessary to drain the water that was used for washing into the sewage from the unit. However, the drain tube, which is often provided in the kit, is often short enough to connect the device to the drain point. Therefore, the hoses for drainage are in no less demand than jets.

Important! At both ends, the drain pipe has nipples that ensure tightness at the junctions. Such a hose can be stretched in length. It is designed to work only with the natural pressure of drained water. Such hoses made of rubber are made.

to the contents ↑

How to locate the fill and drain hose correctly?

• In order for the system to function smoothly, it is necessary to take care of it from time to time, and also correctly position hoses for washing machines. Hoses for water should be placed in such a way that bends do not form along the entire length of the tube, because they can lead to damage to the product and the occurrence of a leak.
• Special restrictions apply to the location of drain hoses. It must be above a certain line, which is indicated in the instructions for washing household appliances.

Important! Typically, the hose should not be above the upper edge of the body of the washing machine.

to the contents ↑

Helpful tips for operating the filler hose:

• Use solidol at the points of the threaded connections. So you can increase the life of the connecting elements.
• Try to avoid getting moisture in the threaded connections. This can cause corrosion, respectively - damage, metal parts.
• Periodically clean the filter installed on the filler hole. In the process of operation on it a considerable amount of dirt, plaque and other debris accumulates. Removing dirt, you extend the life of the washing machine.

Important! If you do not have experience in conducting plumbing work and do not have the necessary knowledge, then you should not connect the washing unit to the water pipe yourself. Lack of knowledge can lead to pressure drops, water leaks or, in extreme cases, loss of efficiency of the appliance for washing. Calling an experienced plumber, you will avoid all these problems and calmly enjoy the fruits of the work of a faithful assistant.

As you can see, the hose for connecting the washing machine plays a big role in the operation of the unit. Without it, washing simply will not happen. It is worthwhile to think in advance about the safety of using such household appliances and purchase a quality filler hose, preferably with the "Aquastop" system.