Newspaper own hands

Very often at home after reading newspapers or magazines there is nowhere to clean them, and we find their place in completely different parts of the room. And if there are children or animals, then sometimes we collect them literally in pieces. To avoid these incidents and always know where you can find a particular magazine, you can buy or make a special system for storing them. And in this article, we are ready to share ideas with you, how a newspaper lady can be made with her own hands. All of them are simple in execution.

to the contents ↑

Materials for the work

For a newsboy on the wall or floor with their own hands, suitable materials:

• plastic bottle;
• fabric;
• cardboard;
• wood;
• leather.

Important! Material for the manufacture of pick up, based on what you already have available, and focusing on interior design, so that the craftspans looked organically in the room.

to the contents ↑

Newspaper from plastic bottles

Any person can find at home a couple of unnecessary plastic bottles. And instead of throwing them away, we will now tell you how they can be applied, so to speak, "for the benefit of society" and make a wall-top with their own hands:

In order to do it, we will need:

1. Wooden bar;
2. 3-4 plastic bottles;
3. A bit of free time.

Action plan:

1. First we choose a place on the wall where our construction will be fastened. It will take a little space.
2. At the selected place we attach a wooden block. It will serve as the basis for our design.

Important! You can hang anything as you like - at an angle, vertically, in parallel. In general, everything depends on your creative approach.

1. Next, go to the plastic bottles. From them we need only one thing - cut off the neck to make a glass from the bottle.
2. Use small screws to attach the bottom of the plastic cup to our wooden bar.

That's all! A simple wall newspaper from plastic bottles with your own hands is ready. Now you always know where to store interesting publications.

to the contents ↑

Newspaper made of

fabric In order to assemble an attractive looking system, we will need:

• 4 wooden slats 24 cm each;
• 4 round slats( 2 by 16 cm and 2 by 14.5 cm);
• fabric;
• rivets;
• two bolts.

Making the frame:

1. In two wooden racks, we need to make two holes 3 cm from the edge of the rack. In the other two, make the same holes, but 2 cm from the edge of the rack. And just in all four make holes in the middle( 12 cm).
2. We connect two slats, in which the holes are 3 cm from the edge, with each other using two 16-centimeter round rods. And there, where 2 cm from the edge - we connect by two other round strips
3. Next we insert the two received structures into each other, and in the holes in the middle they need to be connected by two bolts. We twist them with nuts on the other side to hold

We make a bag:

1. We need to make two identical pieces - 13x13 cm from the fabric we have chosen. Two more pieces are 14.5x17 cm and one piece is 13x14.5 cm.
2. In two pieces 14,5x17 cm you need to cut a piece that will be 5 cm in width and 5 cm in length. Cut must be so that at the edges of it were even pieces of cloth. Their edges can be rounded.
3. Next, you just need to sew it all together to get a fabric bag. A piece of cloth 14.5x13 cm will serve as a bottom for our "bag", two even pieces facing each other.
4. Put a bag on our base. We note, where it is necessary to install buttons or buttons, so that the pens can fix on our racks.

So, the newspaper lady of the fabric with her own hands is ready.

Important! It looks very nice, it is convenient to use:

• can simply be folded and removed, if you do not use it;
• in it you can transfer books during repair, relocation or simply move them to the right place.

to the table of contents ↑

Cardboard newsstand

You can use the

• carton from your kitchen equipment if you have not found a cardboard at home;
• fabric with embroidery or any pattern, if you want to give your handicraft more interesting look.

Instruction:

1. The first thing we do.- Cut the window under the selected fabric with a pattern.
2. Next, you need to glue the workpiece with a simple cloth.
3. In the window we insert a fabric with a pattern or embroidery.

Important! If you do not have a cloth with a pattern, or you just do not want to do it, then instead of 1-3 points you only need to do one - cover the cardboard with a cloth.

1. Cut out the cardboard bottom for the design.
2. Then we glue it all over with a cloth.
3. It is necessary to sew two strips of fabric that will serve as the holder of the sidewalls.
4. We glue the sidewall to the bottom to make a book, as it were.
5. Let the glue dry, you can press all the clothespins.
6. We make legs from cardboard, we also glue them with fabric.
7. We glue the legs to the whole system.

In general, that's all. Your newspaper is ready with your own hands.

Important! This model is suitable for putting it on the table and storing in it your favorite literature.

to the table of contents ↑

Master class for making a newsprint made of leather

Leather model will be appropriate not only as an applied object, but as a real element of decor of any room.

Materials for work

For this we need:

• wooden round bar 15 mm;
• wooden block 20x50x1600 mm - the best tree is hardwood;
• leather belts;
• strong nylon thread;
• copper rings in the form of a rectangle - 2 pcs.;
• drill with wood drills;
• awl, needle for sewing on the skin;
• hacksaw.

Proceed as follows:

1. We make 4 pieces of 40 cm from a rectangular bar. We make cut pieces of 35 cm from a round bar.
2. With a drill and a drill, make holes of the required radius at the ends of the rectangular bars, leaving the edge 2.5 cm.

Important! Do not through holes. Drill out half the width of the bar - in them we will fasten round bars.

1. Next, using a screw we connect rectangular bars. To fix them is at 7 cm from the edge.

Important! Screws must not pass through - choose the right size of the hardware.

1. You need to put copper rings on paired brusks.
2. Next, open the legs of the structure, until they are tucked into the put on rings, tighten the screws well and insert them into the round bars intended for them.
3. Next, put the newspaper on the floor, and note the lines parallel to the floor. This is necessary in order to saw off unnecessary pieces and give the whole system stability on the floor.
4. Then cut the leather straps of 60 cm in length. After having tried the straps along the diameter of the ring, we sew the straps.
5. Stitched straps evenly spread over a round bar.

Everything, your journalist is ready!

to the contents ↑

How to choose a newspaper?

First we need to decide where we need a newspaper man:

• If you need a desk-top newspaper to store frequently used literature in it, we suggest that you make a model of cardboard.
• If you need a newspaper woman in the bathroom, then one of the 2 options is better:
  • from plastic bottles, if you have a large enough room;
  • made of fabric - it is comfortable and does not take up much space.
• Well, in the living room excellent options will be to put a model of leather belts. It will look very beautiful and delight your eyes, and your guests will appreciate it.

Newspaper is a necessary thing in every home, it's always nice to realize that everything is in order and in its place. And decorative handicrafts with their own hands add a special touch to any home, so do not be afraid to experiment - believe me, you will enjoy the work done, which in time can grow into a real hobby.