How to whiten the bath at home?

The bathroom is a temple of purity in any house and it would be desirable, that here all shone and sparkled. But over time, gray plaque and unpleasant rusty spots leave a steady and unsightly mark on the snow-white surfaces of any plumbing. And every housewife faces the problem of how to whiten the bath at home, what means to take to return the cover to the pristine purity.

Modern household chemicals help with this task, which has a disinfectant effect and effectively eliminates bacteria. But you need to choose a product taking into account the coverage and nature of the contamination.

to the contents ↑

How to whiten the bath at home?

Generational experience often helps to find the right way out in the most difficult life situations. But do not forget that proven solutions do not always fit modern realities. For example, recommended home recipes for cleaning on the basis of soda or other abrasives are not suitable for acrylic coatings - they can not be subjected to mechanical cleaning. Enamel on many inexpensive models does not stand such a procedure. Useless and cleaning powders in case of impurities arising on damaged coatings, since dirt is clogged in microcracks and can not be erased.

Choosing the right way to whiten the bath at home, answer two questions:

1. What material is the top layer of the bath made from?
2. What are the nature and cause of the contamination?

On this basis, make a choice of the means by which you will solve the problem of how to whiten the bath at home:

• For cast iron and enameled bowls, almost any means, including those containing aggressive chemical compositions based on acids and alkalis, can be used.
• For acrylic bathtubs, use only special household chemicals or dishwashing detergent.
• It is also easy to wash off the polymer coating with water.

Household chemicals

Various widely advertised cleaning powders, gels, sprays quickly remove plaque, disinfect and protect from new contaminants for some time. All these tools are notable for their effectiveness, but with some types of pollution even household chemicals can not cope, so we recommend using it in combination with folk remedies.

The most popular household products are:

• "Sarma";
• "Cif";
• "Cillit";
• "Domestos";
• "Comet";
• "Sanox".

Rules for the use of household chemicals

When using them, observe the following rules:

1. Use only with rubber gloves.
2. Strictly observe the instructions for use.
3. Do not hold the product for too long and do not use it more than once a week.
4. Clean the bathroom very gently in a circular motion, apply force only in places of deep contaminants.
5. Wash household chemicals with warm, but not hot water.

Important! For acrylic baths we recommend using special products of the following brands: "SanKlin", "RAVAK", "Triton".

to the contents ↑

Popular means for whitening the bath

Even with the most accurate cleaning, household chemicals destroy the sanitary equipment over time, so to preserve its integrity as long as possible, from time to time use folk remedies to whiten the bath.

Advantages of folk remedies:

• Safety for skin and respiratory organs;
• Availability and low price;
• Gentle soft effect on the enamel;
• Efficiency.

Important! Each means has its own secrets of struggle for purity. We recommend the use of the following compounds.

Composition number 1.Soda

This is a very active substance that is part of many cleansing agents. It is characterized by a strong, but at the same time gentle impact. To whiten the bath to a shine, perform the following steps:

1. Soda ash mix with food in a 1: 1 ratio.
2. Moisten the bath cover.
3. Apply the compound to the surface.
4. Leave the bathroom for half an hour.
5. Moisten the sponge in the food vinegar and wipe the bath( without washing off the soda).
6. After 30-40 minutes, rinse the resulting mixture with warm water.
7. Wipe the bathtub.

Important! The described recipe of the composition will help to get rid of the old calcareous deposits, as well as from the stale rust. If the bath is new or the pollution is not very strong, then use only the usual baking soda.

Composition number 2.Vinegar

Another effective and safe way to defeat rust and dirt is to clean it with vinegar. Use a 9% table composition. Apply it as follows:

1. Dampen a large amount of paper napkins with vinegar.
2. Place moistened paper or napkins over the entire surface of the bathtub.
3. Leave the cleanser for 3-5 hours.
4. After the time has elapsed, remove the wipes.
5. Thoroughly flush the surface with water.

Important! This method is suitable for any coating, but is most effective for whitening a cast-iron bath.

Composition number 3.Citric acid

Citric acid is known for all its bleaching properties. Use this tool if rust and lime scale are eaten quite firmly.

Follow these instructions:

1. In 0.5 l of water, dissolve 2 sachets of citric acid.
2. Apply to a soft sponge.
3. Walk on the entire surface of the bath.
4. After 20-25 minutes, gently wipe the cover with a clean sponge.
5. Wash off any remaining water with plenty of water.

Important! The advantage of citric acid is that it is great even for solving the problem of how to whiten an acrylic bath at home.

to content ↑

Gentle non-trivial cleaning method

This method is ideal for housewives who do not want to be heavily burdened by the cleaning process. To whiten the bath from rust:

1. Dial a full bath of hot water.
2. Add any oxygen bleach underwear. Concentration of the drug should be at least 2 times higher than when bleaching things.

Important! It is better to carry out the cleaning procedure at night.

1. Leave the solution for several hours, and preferably until the morning.
2. Drain the water and you will see a perfectly shiny plumbing.
3. So that there are no stains left on the surface, walk on the bathroom with a soft sponge, moistening the cover with water from the shower - so you will remove the remnants of the plaque.

Important! Instead of oxygen bleach, you can use citric acid, but you need about 30 sachets per time.

to content ↑

Effective cleaning of complex contaminants

Rusty stains and lime deposits on the new enamel are removed with oxalic acid:

1. Dilute in water until a thick slurry forms.
2. Apply the mixture to dirty areas.
3. Wash off with warm water using a soft sponge.

to the contents ↑

How to whiten a cast iron bath at home?

If in the house the old cast-iron bath was covered with a network of small cracks and a dense layer of plaque, then, by and large, there is already nothing to lose. Therefore, use any cleaning powders safely. To make the effect more noticeable, use a metal sponge that will easily penetrate into all the cracks.

Before bleaching the cast-iron bath with the selected tool, do the following:

1. Warm the bathroom with steam or hot water.
2. Wait for the metal to warm up.

Clean the bowl further:

1. Treat all areas with lime deposits and rust brushes with the product.
2. Rinse the plumbing with water.
3. After removing particularly difficult spots, cover the surface of the bath with a solution of bleach or any product with active chlorine( this can be either "whiteness" or "Domestos").
4. After a few hours, thoroughly wash the plumbing with warm water.
5. Repeat the procedure if necessary.

Important! All operations should be carried out with gloves and with the door open, as the chlorine vapor can lead to irritation of the respiratory system. After the procedure, ventilate the apartment.

If, after all the procedures and treatments listed, the gray spots on the bottom of the bath do not disappear, and the fine black mesh remains, then it's not mud. Simply the enamel of the bath has fallen into disrepair. In this case, restoration is necessary.

to the contents ↑

How to restore a cast iron bath at home?

If you do not want to change your high-quality cast iron bath only because of loss of external beauty and smoothness, then restore the enamel.

Advantages of restoration:

• Absence of black spots, roughness, unpleasant odor;
• Warm to the touch surface of the coating;
• The polymer will hide all surface defects.

Specialists can produce a ready-made acrylic liner. This is one of the fastest types of restoration, but it is not suitable for all models and is too expensive. We offer to do it yourself and at home.

You will need:

• drill;
• 2 grinding tips: end and flat;
• 1 sheet of fine-grained nazhdachki;
• for a flat nozzle 5-7 pieces of sandpaper with a grain size of 40-60;
• brush;
• solvent: acetone or any of those recommended by the manufacturer;
• 100-150 g of oxalic acid;
• measuring cup;
• enamel, and for color coating - the coloring paste;

Step-by-step instruction - method 1:

1. Sand the surface of the bath with the help of nozzles.
2. Strip the surface of the dust.
3. Rinse the bath with oxalic acid.
4. Rinse the surface by typing and draining the bathtub completely.
5. Soak the surface with a rag.
6. Allow the plumber to dry completely.
7. Apply the enamel with a brush on the surface. Do this in several layers.

Important! For coating you can use enamel in cans, but it is the least durable and without the experience of such works it is extremely difficult to apply it.

1. The bath is ready for use after 7 days.

Step-by-step instruction - method 2:

A newer solution is an acrylic coating by uniformly filling the walls. The thick composition of acrylic forms an even and fairly thick layer of acrylic, and you can operate plumbing after 4 days.

to the table of contents ↑

Bath Care

To keep the enamel of your bath smooth for many years, take good care of it. Adhere to simple rules:

1. After each use, rinse the plumbing and wipe dry, so that prolonged contact with water does not lead to plaque and microcracks.
2. Avoid sudden temperature changes. Do not pour hot water into a cool tub and vice versa.
3. When staining and dripping water around the sink, use folk remedies to remove them.

We hope that our recommendations and advice will turn your plumber into a model of cleanliness and order, and after these whitening procedures a radiant beauty will return to the bath.