How to clean the carpet in your home

Carpet, like any floor covering, is the most susceptible to contamination. How to clean the carpet at home, we will tell you in this article. With its convenience in use, there are several specific methods of care, but in order not to spend extra effort and keep the appearance of the comfort item clean, use the following tips when cleaning such a cover, and it will regularly serve you and please the eye for many years.

to the contents ↑

What is carpet?

There are several types of carpet bases:

• Of natural materials - categorically does not accept washing cleaning, especially if the product with a long pile, it hardly dries and mold can form.
• Coating with natural pile of wool is cleaned by all kinds of vacuum cleaner.
• Synthetic base - characterized by ease of care and the use of wet cleaning. This type of carpet is not afraid of high humidity and does not change its structure after cleaning.
• When cleaning the carpet on an adhesive basis, you need to limit the amount of water, as it can dissolve the silicate glue and the product is deformed, and when it dries, there will be stains.

Important! Remember that when choosing the means to clean the carpet, you need to take into account the density of the pile and the type of the base of the coating.

to the contents ↑

How to clean the carpet?

In order to clean carpeting, use improvised and chemical carpet cleaner:

• soft brush;
• sponge;
• liquid ammonia;
• vinegar;
• soda;
• detergent;
• liquid and powdery means for washing carpet.

Important! If you have a washing vacuum cleaner - consider that the problem is how to wash and clean the carpet , it is solved. Use special carpet cleaner, or universal carpet cleaner Vanish Oxi Action. But consider that it is not suitable for natural nap.

to the contents ↑

How to clean the carpet?

To simplify your task, follow these simple rules:

1. Divide the surface to be treated visually.
2. Pre-machining the surface with a vacuum cleaner with a cylindrical brush with soft bristles to improve the penetration of cleaning agents.
3. Treat with reagents that quickly dissolve dirt.
4. If you use a stain remover or other chemicals, try them on an inconspicuous area of ​​the coating, since they have a very significant disadvantage: they can change the color of the pile, this applies to materials made from natural fibers.
5. Do not rub the soiled areas, but pat them with a damp cotton cloth until the stain completely disappears.
6. If a stain of a thick consistency is formed, remove it in the direction from the edges to the center with a knife or spoon.
7. Pay special attention to particularly polluted areas. Take a few walks through the more problem areas.
8. Separate stains should be cleaned crosswise.
9. Use a vacuum cleaner to remove residual cleaning agents.
10. Dry the carpet thoroughly.

to Contents ↑

Cleaning Methods

Before you clean or wash carpet in your home, determine which method will be more convenient for you. Take into account the characteristics of the canvas, so as not to spoil it during cleaning.

Method 1

If the carpet is not heavily soiled, use a dry cleaning - this type of cleaning allows you to extend the life of the coating without exposing it to aggressive liquid detergents. Adhere to such recommendations:

1. Use a vacuum cleaner in the form of a spiral. Carefully combing the pile, it removes virtually all dirt from the inside and outside, preserving the structure of the pile.
2. Use a special dry powder to clean the carpet, it has an absorbent effect.
3. Distribute it over the entire surface for the time indicated on the product package. The action of the powder is that the pellets contain a small amount of moisture, which, by absorbing the contamination, evaporates.
4. Wait until the agent absorbs dirt.
5. Vacuum the remnants of the cleaning agent.

Method 2

Another kind of dry cleaning - dry foam:

1. Dilute the product according to the instructions until a steep foam is formed.
2. Apply the foam substance with a sponge or brush.
3. Over time, the foam begins to absorb dirt and settle.
4. After completion of the reaction, remove the foam marks with a vacuum cleaner.

Method 3

Remove impure dirt in the base of the coating with a wet cleaning equipment:

1. Make a warm detergent formulation using special shampoos or agents that penetrate deep into the fibers, pushing the dirt onto the surface.
2. Note the chemical composition of these products so that they do not leave any sticky residue on the surface, to avoid the formation of new contaminants.
3. Pour into a special container, place in a vacuum cleaner.
4. Install a special carpet cleaner.
5. Using a vacuum cleaner, spread foam over the coating with a special nozzle, rub the product into the coating.
6. Assemble the "used" tool.
7. If necessary, rinse and remove moisture residues with a jet extraction.
8. Dry the coating during the day, if possible, lift the coating off the floor.

Important! This kind of cleaning is often not recommended to avoid deformation or waterlogging of the carpet, which leads to the appearance of mold and unpleasant odors.

Method 4

Use a manual brushing method to thoroughly walk the entire surface. In order not to damage the pile, use a sponge or a brush with a soft bristle and the means described below to remove all kinds of contaminants.

Important! Remember that the choice of one or another method, directly depends on the type of spot, its aging and size.

to the contents ↑

How to wash the carpet from difficult spots?

The best cleaners for stains from wine, juice, coffee, tea and beer from the carpet are detergent for dishes and vinegar:

1. Treat contaminated area with detergent
2. Wash with a damp cloth.
3. Wipe with a solution of table vinegar with water.
4. Then apply a carpet cleaner.
5. Remove residues with a cloth until it dries completely.

Ammonia alcohol is the main household pollution fighter:

1. . Clean the main part of the dirt with a detergent: soak a little water, apply the substance, foil, leave for a few minutes.
2. Wash off with a damp cloth.
3. Treat with ammonia.
4. Dry.

Clean the carpet from the ink, nail polish, resin and soot will help dissolving substances:

1. Dirty slightly dampened surface with water, treat with a dissolving substance.
2. Leave for a few minutes, rub the dampened cloth in a solvent.
3. Wash with a detergent.
4. Clean with a damp cloth until all contamination and odor are removed.

Important! Carefully use aggressive solvents, they can damage the color and texture of the pile.

To remove acid mixtures, use soda:

1. Cover the problem area with a 10: 1 solution of soda water with ammonia.
2. Leave it for a while.
3. Dry without rinsing.

Remove traces of wax, gum, plasticine with cold:

1. Put a few pieces of ice in a plastic bag.
2. Attach to a stained place.
3. Leave until completely cured.
4. Scrub with a knife.
5. If necessary, wipe off with a nail polish remover.

To clean the blood spots from the carpet:

1. Make a soapy solution with a ten percent alkali content.
2. Wipe the blood.
3. Dilute vinegar with water in a proportion of 1:10.
4. Apply for a few minutes.
5. Rinse with warm water.
6. Dry.

to the contents ↑

Useful advices

1. When working with chemicals, work in a well-ventilated area.
2. Observe the instructions for cleaning products - do not increase the concentration at dilution and the time of exposure.
3. When cleaning the floor covering, take care not to stain furniture of different types with solutions.
4. Try to clean carpet 1-2 times a week.
5. Fresh stains are always easier to remove than old ones.
6. Use special anti-static and dirt repellent to cover for a long time.

Now you know all the rules of carpet cleaning. Observe them and you will not have big problems when cleaning, and time will have to spend much less on this process.