Vanish for carpet cleaning

Cleanliness of the house is the guarantee of good mood and health. But often cleaning becomes torture, especially when it comes to cleaning carpets. To give carpets to dry cleaners is expensive, and it is very labor-consuming to clean them on their own. But today there is a tool that makes life easier for millions of housewives. Let's talk about "Vanish" for carpets for manual cleaning and other options for the products of this brand.

to content ↑

Types of detergent

Under the brand name "Vanish" today produce several different in form products, allowing you to clean your carpet from various stains. It is convenient that the products of this brand are available in almost any store.

Remedies:

1. Shampoo for carpets. Their manufacturer produces in two versions: "Vanish" for carpets for manual cleaning and with antibacterial additive for cleaning with a washing vacuum cleaner.
2. Spray stain remover for carpeting.
3. Powdered "Vanish" for carpet cleaning by dry method.
4. Foam for cleaning stubborn stains from carpets.

Each of the brand's products has its own characteristics and is suitable for various cleaning methods. But any of them can apply a number of recommendations.

Recommendations:

1. The first thing to do when choosing any of the tools is to study the instructions for use.
2. Do not use cleaners on surfaces that can be shed.

Important! This also applies to handicrafts. Before using it is better to conduct a small test, and check the durability of the paint in an inconspicuous area.

1. Before using "Vanish" carpet should be vacuumed - so you will achieve its maximum efficiency.
2. Do not use such a cleaner when working with detergent vacuum cleaners. The only exception is a specially designed shampoo for detergents.
3. After cleaning, it is recommended to ventilate the room in which the work was done.

Let's figure out how to work with each of the ruler's tools.

to the contents ↑

Principle of operation

So, in the line of the brand there are four main products with different functions. How to choose the right one and how to use it? Consider the nuances.

Powder

This product is designed to clean large carpet surfaces, and allows you to remove even old stale impurities. They are convenient to use, and in addition to cleanliness, it gives your carpet a fresh look.

The composition of the product allows all contaminants to come to the top, which makes them very easy to remove.

Important! In this tool you do not need to add water - it is used in the form in which it is sold.

Let's look at how to use the powder. For this, a number of actions should be taken:

1. The first stage is preparation. The surface to be treated with the product will be vacuumed without the addition of water. Immediately prepared and cleaning agent according to the instructions on the package.
2. After preparation, the product is applied to the carpet with a soft brush and wait for about half an hour until it dries.

Important! When applying, make sure that the powder is distributed as evenly as possible.

1. After the necessary time, the product is collected using a vacuum cleaner. If the power of the device is not enough - the procedure is repeated several times until all the powder residues are removed.

Important! If everything is done correctly, cleaning with Vanish powder will be easy enough and very effective. It should be remembered that it is necessary to test the substance, after the procedure to ventilate the room, and also use disposable paper bags for the vacuum cleaner, in fact it is much easier to throw the collected product together with the bag than to shake it out of the tissue bag.

Spray

This product is designed to remove stains. The manufacturer advises to use it immediately, as soon as the stain has appeared. But even if the contamination has already entered - this is not an excuse to give up the spray, because he cope even with very complex cases. It is very simple and easy to use, and with it any of your cleaning will become much easier.

How to clean?

1. Pre vacuum cleaner carpet.
2. Spray on all contaminations of the spray, without strong pressure wipe them with a soft brush for better penetration of the product into the stain.
3. After - it is necessary to wait 3-5 minutes, clean the treated areas with a soft cloth.

Important! Also an important condition is the test for the durability of the paint before the use of the product.

Next, let's talk about shampoo for carpets of this brand.

Shampoo

Manufacturer produces two types of similar cleaning products:

• for manual cleaning;
• for use with detergents.

In these variants, "Vanish" produces antibacterial shampoos, the purpose of which is not only cleaning the carpet of dirt, but also its disinfection. First consider the first option.

Manual cleaning

As for all other types, these products are provided with a certain cleaning procedure:

1. Preparation: vacuum cleaner carpet in the usual dry way.
2. We prepare an aqueous solution of detergent in a proportion of 1: 9, and for best results, stir well and beat the product to form a thick foam.

Important! The water temperature should be about 40 degrees.

1. The third step is applying the sponge to the contaminated carpet. For high-quality cleaning you need only foam from the solution, the carpet should not get wet.
2. When the foam is completely absorbed into the carpet and dries, it is cleaned with a normal vacuum cleaner.

Important! General advice on the use of any means of "Vanish" is relevant in this case.

Detergent vacuum cleaners

For this type of technology, the manufacturer has developed special means, the use of which also implies a certain sequence:

1. Before cleaning, it is necessary to vacuum the carpet, but do not wet it.
2. For one liter of water at a temperature of about 40-45 degrees, we dilute 1,5 caps of the product.
3. The solution is poured into the detergent compartment and we clean the carpet in the usual mode.
4. Next, the compartment with the tool is removed, washed, waiting for complete drying of the carpet and washing it with a vacuum cleaner again, but with ordinary water.

Important! In this case, the ban on the use of washing equipment, of course, loses its relevance, but the remaining requirements of the manufacturer remain in place.

Foam

This tool the manufacturer has developed for the most persistent stains, which often appear in the corridors or in the kitchen. It cleans the surface well and updates its appearance.

How to clean?

1. Preparation - cleaning the carpet with a vacuum cleaner.
2. Thoroughly shake the container, and evenly apply the product to the carpet from a distance of at least 0.5 m.
3. If necessary - help distribute the foam with a sponge.
4. We wait until the agent dries( up to three hours), we clean the carpet with a vacuum cleaner.

After using any of the tools, do not forget about airing the room.

Despite the different forms of "Vanish" for carpets, the composition of products is almost identical. The combination of active substances can remove even very persistent contaminants, and proper preparation and use in accordance with the instructions will help achieve the best possible result.