The bone from the bra hit the washing machine

In many families, the washing machine is the Bermuda triangle, where one sock from the pair and various ribbon-ties disappear,.But sometimes there is lost even the lower lingerie, and the exact one of its details is the bone from the bra. And if all women know perfectly well what it is, then men usually learn about its existence only at the moment when the bone from the bra got into the washing machine. To take out such a detail is sometimes not easy, but knowing some secrets it is quite possible to do it yourself at home. So do not rush to immediately call the master and lay out a tidy sum for his services.

to the contents ↑

How can I tell if a bone from the bra is stuck in the washing machine?

From the understanding of what is stuck in the typewriter, the further actions to extract this object often depend.

Signs that a bone from the bra has got into the washing machine:

1. Strong metal clanking or knocking during washing.
2. No support plate in the bra.

Important! If you hear scraping or other foreign sounds while the washing machine is running, turn it off immediately. Otherwise, a serious breakdown of the equipment is possible.

to the contents ↑

Do I need to remove the bone from the bra from the machine right away?

Please note that sometimes a stone, getting into a washing machine, does not cause gnashing and disturbances in the work of equipment. But over time, it can start to rust, which will cause red spots on the laundry. And also under the influence of various factors it can shift and cause a breakdown of the machine. Therefore, having lost this detail of the laundry after washing, it is better to immediately think about how to pull a bone from the bra from the washing machine.

to the contents ↑

The bone from the bra hit the washing machine - what is it?

To assess the possible harm to the washing machine from a stuck bone, you first need to understand, in fact, what material it was made from.

The further extraction method and possible location in the machine also depends on this:

1. Plastic parts of the bra cups are quite harmless. Such bones are flexible and can not severely damage the drum and the tank of the washing machine. Often they break, and then their pieces can be found in the filter for draining.
2. Iron "parts" of the bra can easily damage the mechanisms. However, you can use a magnet to remove the metal bone from the bra from the washing machine.

Than the jammed bone is dangerous for the machine:

• Slipping under the drum, it can become transverse and pierce the tank wall. Naturally, this will cause a leak and without a master there is no way to do.
• It can also be hooked on one edge by the drum, and the second by a heating TEN.In this case, when the drum rotates at high speed, it is possible to damage the heating element. Even there are cases when the heating element tears completely.
• It can puncture the rubber seal cuff of the hatch. Accordingly - for further use of household appliances, the cuff will need to be replaced.
• If a bone from the bra gets into the drum of the washing machine, it can simply be jammed. In this case, the technician will report an error.

to the contents ↑

Where is this bone?

To understand how to pull a bone from a bra from a washing machine, you first need to determine its specific location.

Most often it can be found:

• on the bottom of the drum;
• at the bottom of the tank;
• between the tank and the drum.

To determine the specific location of the bone:

1. Carefully consider the things that were erased simultaneously with the bra. Suddenly you are lucky - you will find it there.
2. Inspect, or better - finger your entire drum. Sometimes it sticks in the hole so that it can be pulled out with hands or tweezers.
3. Take the flashlight and, slowly scrolling the drum, try through the holes to find in the tank a bone from the bra, which got into the washing machine.
4. If the above mentioned methods did not help to reveal the part from the bra, then it can be found only during the dismantling of the machine.

to the contents ↑

How to remove the bone without parsing the washing machine?

If you do not want to disassemble the washing machine, you can try to get the bone from the bra with your fingers.

Important! Before starting any operations with the washing machine, be sure to disconnect it from the mains.

Armed with a flashlight, thin wire and great patience, get to work:

1. Open the hatch and place the flashlight on so that through the holes in the drum you can see the bottom of the tank.
2. Then carefully study all the holes - you may be able to notice the bone from the bra, which hit the washing machine.
3. Make a small hook at one end of the wire and insert it into the hole in the tank.
4. Now you need to pick up the desired part from the bra with a wire.
5. Slowly turning the drum, make sure that the stone gets into one of the holes in the tank.
6. Almost all the work is done. It remains only to pull the bone from the bra from the washing machine with tweezers or pliers.

Important! It is very difficult to rotate the drum and simultaneously manipulate the wire. Therefore, it is better to find an assistant in advance.

to the contents ↑

If you are among the lucky ones

Some owners of household appliances are very lucky, as you can get the "spare part" from the bra from their models in minutes. Such lucky owners include owners of machines with vertical loading from the brands Bosch and Siemens. In these models there is a special hatch for extracting small items that accidentally hit the mechanism.

In this case, proceed as follows:

1. Close the drums.
2. Scroll it half a turn.
3. Open the latch. As a rule, the hatch will be just opposite the drums of the drum.
4. Return the drum to its original position with the doors open.
5. Remove the stone from the special hatch.

to the contents ↑

Get the bone through the hole for the heating element

Many masters of service centers prefer this method, because it allows you to extract the bone from the bra that got into the washing machine, in 90% of cases.

Important! This method is suitable for those models in which access to the heater opens from the back of the machine.

Some washing machines of trade marks Bosh, LG and Samsung have a heating element in front. And to remove the front panel is much more troublesome than the back.

The basic stages of removing the stone through the hole from the heater:

1. Expand the washing machine so that you have easy access to the back panel.
2. Remove the screws from the back cover and remove it. If there is a service hatch behind, then you just need to open it.
3. You will see a large wheel - the pulley of the drum, behind it is the tank body itself. Just below the wheel are the power cables of the TEN.
4. Disconnect the contacts of the heating element.

Important! Before removing the power terminals from the heater, draw or take a photo of their location, so that when connecting, there is no confusion with the wires.

1. Now you need to loosen the pin as much as possible, which is held by the heating element itself. To do this, unscrew the nut almost to the end - you do not need to remove it completely.
2. Grasp the TEN with both hands and slightly swing it from side to side, pull it toward you. Sometimes it's rather difficult to do with your bare hands - in this case, use pliers.

Important! In no case do not try to pull the TEN, podkovyrnuv his screwdriver or other solid object. You can damage the seat of the heating element, which in the future will cause a leak.

1. Removing the heater, you can simultaneously pull the bone from the bra from the washing machine. If this does not happen, then it is easy to get a "spare part" from the bra through the formed hole by picking it with wire or pliers.
2. Install the heating element back and connect the wires.

Important! If grooves are formed on the TEN elastic band-seal, which prevent the heating element from being put in place, they need to be slightly shredded with sandpaper or a file.

1. Tighten the rear cover.

to contents ↑

We get the stone by removing the drainage pipe

The above method is suitable for most cases, but it remains 10% when it does not help. What can I do if I got a bone from the bra in the washing machine, but I could not find it in the hole from the TEN?"In that case, maybe it's stuck in the drain pipe."To make sure of this, it will be necessary to remove it and clean it.

How to get a stone from the drain:

1. Transfer the styar to the center of the bathroom or another room. Most models have access to the drain pipe through the bottom, so there will be enough space to turn the washing machine and work.
2. Remove the powder.
3. Place the machine on its side.

Important! Before starting work, do not forget to drain the water.

1. Unscrew and remove the bottom of the washing unit. Note that for some models, the bottom is attached to special fixatives.
2. You will see a thick drain pipe that connects the tank and the pump. You need to remove it.
3. First loosen the clamps, and then remove the pipe.
4. Remove the bone from the bra, as well as other foreign objects from the nozzle, in the washing machine, and rinse it thoroughly.
5. Put the nozzle in place, close the bottom, if necessary, re-adjust the machine feet.

If after all the manipulations you did not manage to pull the bone from the bra from the washing machine or if there were other breakdowns, for example leakage or breakage of the heater, we advise you to contact specialists from the service center.

Important! The ingress of foreign objects into the drum of the styrant does not apply to warranty cases, so the reference to the master will be paid.

to the contents ↑

Precautions

Now you know what to do if a bone from the bra gets into the washing machine. But let's see how it can be avoided:

1. It is more preferable to wash bras manually. Thus, you not only avoid getting foreign objects in the drum, but also protect the bra cup from deformation.
2. Before loading the underwear into the machine, place it in the laundry bags, preferably with a zipper. Instead of this case, you can use a regular cotton pillowcase.
3. Before washing, make sure that the bra is whole. Pay special attention to the "dangerous" zone.
4. Use a special container for bras to prevent crumpling of the foam rubber cup.

Knowing the answer to the question "How to pull a bone from the bra from the washing machine?", You will be able to solve the problem yourself and significantly save the family budget.