How to clean gold from iodine?

Contents:
  • Step-by-step cleaning of gold
  • How to clean gold in special situations?
  • Gold with stones - how to clean it?

Are you so happy about the new precious acquisitions, wear them practically without taking them off, and also are ready not to part with the decoration day and night? But sooner or later there will come a time when it will be necessary to start cleaning up the gold chain or rings from everyday dust, chemicals, dirt and other unpleasant little things. How to clean gold from iodine and other contaminants, we will tell you in this article.

to content ↑

Step-by-step cleaning of gold

Gradual purification of gold into itself includes the following works:

  1. Wash.
  2. Dry cleaning.
  3. Mechanical cleaning.

Important! To to purify gold from iodine or from different contaminants, it does not always require such painstaking step-by-step work. Everything depends on the complexity of the layers on the surface of the precious metal. It is for this to be guided when choosing the mode of action for cleaning your jewelry.

Gold washing

Each girl has a jewelry that she likes incredibly, but because she lost her pristine shine, she stopped wearing it. But there are ways to clean gold from iodine, as well as other contaminants.

At the first stage, the decoration, which is made of gold, is simply washed in a soapy solution:

  1. In order to prepare this solution, take hot water - it will be enough if the temperature is not more than 60 degrees C and also detergent. Instead of detergent you can use shampoo, soap, washing powder and even dishwashing detergent.
  2. Put your jewelry in the water for a small amount of time.
  3. After a few hours, the contamination from the surface of the jewelry will almost disappear. After that, just wipe them with an ordinary toothbrush to wipe away any remaining light dirt.

After completing the first stage of gold purification, the product must be inspected carefully. This is necessary to assess how effective the manipulations were. In the event that there are residues of contaminants, try to repeat soaking in a solution of soapy water.

Dry cleaning

If, after repeated cleaning, your glitter has not returned to your decorations, it is necessary to pass already to the second stage - the use of chemicals to purify gold from iodine at home.

Use ammonia solution

Usually, to remove dirt from any type of jewelry, use a solution of ammonia. Oxides, which are formed on a shiny gold jewelry, are compounds of silver or copper with oxygen. Ammonia alcohol, which is ammonia, reacts chemically with them, resulting in a compound that dissolves readily in ordinary water. That is why ammonia is a universal remedy to purify gold from iodine on any jewelry.

To apply this tool:

  1. Buy an ordinary aqueous solution of ammonia. It is desirable that its concentration is not less than 25%.
  2. In a small container, pour the solution.
  3. Then lower your jewelry into it for about 2-3 hours.
  4. After this procedure, rinse the product again with running water, and then dry thoroughly.

Important! Strongly contaminated jewelry can be left in a solution of ammonia at night.

Vinegar to help

The easiest and most affordable method is to try to clean the gold with vinegar. It is only necessary to take the vinegar essence, and in any case not table vinegar.

To purify gold from iodine, it is necessary: ​​a wadded disk or a cotton swab dipped in vinegar and wiped their jewelry. Then the decoration should be rinsed in clean running water and wipe dry.

Important! All this manipulation should be done only in gloves, it would be good to wear a cotton-gauze bandage. Acetic acid can cause not only burns on the surface of the fingers - it can also burn with its vapors and the upper respiratory tract.

Abrasive tools

Certainly, abrasive cleaning will help you, but it can ruin the ring. In the event that there are small and not too noticeable specks, you can try to erase them with toothpaste or chalk diluted with water until the formation of a homogeneous gruel.

Mechanical cleaning

Mechanical cleaning includes auxiliary operations with sharp and thin tools. For this you can arm yourself with a needle, pin, tweezers. This procedure allows you to remove dirt in hard-to-reach places on the decorations. But you need to do this very carefully and carefully, so as not to scratch the surface, especially if the jewel is inlaid with stones.

Important! If the decoration is very expensive, it is better to give it to a professional master to have clean gold from iodine and other dirt. A competent specialist can not only correctly and quickly pick up the best technology, but also perform everything quickly and correctly.

to the contents ↑

How to clean gold in special situations?

Gold jewelry, which is made of white gold or decorated with inserts of precious stones, must be cleaned especially carefully. How can this be done at home?

White gold

Why does white gold require special purification? In the alloy ligature of such ornaments, nickel is present, and this component gives the metal a special color. The surface of the product, which is made of white gold, is usually covered with rhodium, but this spraying eventually becomes thinner. In order to extend the life of the decoration, it is recommended to clean the gold with a soft cloth or a napkin.

How to clean chemically white gold?

To begin with, prepare a solution that consists of the following ingredients:

  • 100 g ammonia;
  • 100 g water;
  • 100 g of detergent.

Then proceed as follows:

  1. Mix in a small container of detergent together with hot water, then add ammonia to them.
  2. Leave your jewelry in the tank for 1-2 hours.
  3. Wash with water and wipe with a tissue.
  4. Cleaned decoration is extremely important to thoroughly dry, because the remaining moisture can damage the metal quite severely.

Important! In order to clean white gold, it is not allowed to use powders or pastes when cleaning. You can replace the powder with ordinary liquid soap. You can wipe your jewelry only with a soft cloth, but in no case by hard brushes, because they will damage the rhodium plating, and then leave behind small scratches, spoiling the appearance of the precious product .

Popular method of cleaning white gold

Clean white gold with a mixture of beer and egg yolks: mix half a glass of beer with one egg yolk until smooth. Decorate with a soft cloth dampened in this solution.

to the contents ↑

Gold with stones - how to clean it?

Cleaning of gold with jewels inserted into it requires even more careful and careful attitude. The method of cleaning will depend on the type of stones.

Important! It is strictly forbidden to lower ornaments in which stones are glued in soapy solution - they can be cleaned only with a rag, in advance, which you moisten in this solution.

In decorations, stones can be soft, and also hard. The category of soft stones includes pearls, amber, turquoise, and now to hard - sapphire, topaz, and also a diamond.

Jewelery with soft stones

For products that have soft stones, there is a small list of rules for use and care:

  • Decorations with soft stones should never be cleaned with vinegar or ammonia, because they can not stand such close contact and can subsequently dissolve or just be damaged in an acidic environment.
  • Do not use toothpaste or other abrasive substances for cleaning.
  • Regular care for products with soft stones is the regular rubbing of jewelry with flannel cloth or suede.
  • Soft stones do not like water at all, which is why after contact with the ornaments with water, it must be thoroughly wiped dry and dried.

Important! The optimal option for cleaning products that have soft stones is a solution consisting of water and alcohol, taken in the same proportions. After this, wipe with a soft cloth, which is soaked in soapy water, washing with water and thorough drying.

Jewelery with hard stones:

  1. It is best to clean such decorations with ammonia or hydrogen peroxide.
  2. An effective way is to soak in a solution of water, liquid soap and hydrogen peroxide.
  3. A regular warm soapy solution suitable for regular maintenance is prepared from liquid soap.

We hope that our tips will help you in restoring the primordial brilliance of your jewelry and you will always look in them irresistibly.