How to sew fur sneakers by yourself? Patterns for fast tailoring

Winter has always been famous not only for cold weather outside, but also for a cozy, warm atmosphere in the house. At this time, you want to warm not only yourself, but also those who are near you. So why not sew your family members a warm slippers? From this article you will learn several ways how to sew fur sneakers with your own hands, patterns will help you to quickly understand all the nuances, in the end - you will spend a minimum of time and money on it.

to the table of contents ↑

Cozy home accessory

For future work, some materials should be stocked up:

• A ready-made pattern - the process of its manufacturing will be described below.
• Soft leather - will be used as an insole.
• Fleece.
• Fur.
• Decor elements as desired.

Important! Fur can be both artificial and natural.

In order to make a pattern, you can use two methods:

• Print ready, then adjust it on your foot or leg of the person for whom the garment is made.
• Take old slippers and cut out two details on the contours - this way is much easier than the previous one.

Now you can go directly to the manufacture of the product. In order to sew the slippers from the fur with your own hands, to make patterns, you must follow this algorithm:

1. Take one of the parts, cut it into two equal parts.
2. Attach the resulting details to a sheet of paper, circle them.
3. Now it is necessary to measure the width of an even part of the spout of the shoe, then mark it with conspicuous dots, putting it 40 mm from the edge. After this, you need to measure the length of the insole.
4. To attach the spout to the piece of rectangular shape, cut the middle in it. As a result, you will get a suitable pattern.
5. 6 basic parts cut into patterns, adding 4 cm to the allowances.
6. Fur and fleece parts with allowances to sew together - so that the fur was inside the product. Then, then sew a fleece sole - allowance on it should not be.
7. Insert the workpiece from the fur into the workpiece from the fleece, sew, leaving space so that you can turn the product( it is necessary that the fur was inside the sneaker).
8. Sew the product, sew the insole of leather.
9. Decorate slippers on your own.

to the table of contents ↑

Slippers-Ugri from old sheepskin coat

If in your house there is some old sheepskin coat that you are about to throw away, do not rush to do it. You can give this seemingly unnecessary thing a new life, for example, to sew slippers from an old sheepskin coat.

For further work you will need:

• Old sheepskin coat.
• Leather for insole.
• Ready-made patterns.
• Strong thick thread.
• Decor elements.

Master-class for tailoring

The process of their manufacture is not as complicated as it seems at first glance:

• The first step is to build a pattern of insoles. To do this, it is enough to circle your foot or leg of the person for whom you are sewing sneakers.
• Transfer the resulting sketch to the prepared sheepskin coat.

Important! So that the sole does not wear off, it is recommended to make it out of durable material.

• Similarly, make the side parts of home shoes.

Important! When patterning details, you must consider the width of your ankle and the standard size of your shoes.

• Transfer the patterns to the sheepskin material, leaving about 1.5 cm for the seams.
• Cut the planned blanks and start sewing them together, using the cooked strong yarns.
• Decorate the finished product to your liking.

Slippers are ready!

to the table of contents ↑

Classic slippers

After making the pattern of the sole of the shoe and its top( this time it is simplified as much as possible), you can proceed to making slippers from the fur with your own hands:

• Uncover the soles by adding 5 mm to the allowances.
• Reduce the laying of the gasket by 7 mm along its entire contour - this is to avoid thickening of the joints.
• Glued leather soles and gently cut off all the edges.
• Glue the sole on the edges with the top of the slippers seam outward, not forgetting to combine the control marks.

Important! If the model is closed, then it is necessary to add extra length of the part from above on the toe part. If open - you need to adjust the length of the top part so that the leg is tightly held in the sneaker.

• Connect the top of the product and the sole.

The product is ready!

Important! The seam can be covered with a decorative leather braid or other suitable decorative element. In order for the finishing elements to be well fixed, you can use a glue gun, which is designed specifically for needlework.

In order to protect your health, you should wear warm sneakers on cold winter evenings, which you can buy in a store at a low price. However, it will be much nicer for you and your relatives to wear your own hand-sewn fur slippers.