- We build the pattern
- We cut the product
- Making the shorts
In the hot summer, no defender can not do without stylish, free shorts. Such a piece of clothing, sewn by yourself, will be your ideal gift for your man and certainly will not leave him indifferent. Master class, how to sew men's briefs with their own hands for beginners, patterns for quick work, many useful tips you will find in this article.
to the contents ↑We build the pattern
Before we start the pattern, we need to remove some of the measurements:
- Waist-hem waist - Art.
Important! The letter C means a half-grip, O is the girth.
- Semi-hip of the hips( along the buttock line) - Sat.
- The length of the product is Di.
Before starting the work in the upper left corner of the graph paper, you need to put the point A. From this point on both sides you need to draw two lines - horizontal and vertical.
Next, you need to follow the following steps:
- From the marked point down, we lay off a segment whose length will be the same as the measure of Di. This point will be called N.
- Next, mark the line of the step. From the highest one, we set aside the value of the measure Cb and add 3 cm. Let's call this label the letter "B".Further from this point a horizontal line( we call it BG1) is drawn - it will be the step line. HH1 - 2 cm. From the point with the name H1 draw a line that will be parallel to the AT.
- Let's move to the width of the waist and the front half. From the A mark, we plot the Cb to the right along the line, and add a 3 cm-label. T. From the just marked point, draw a perpendicular to the lower edge of the sheet. When this line intersects with the step line, put the H2 label. The points H and H2 are connected by a slightly concave line. TT1 has a length of 1 cm. The points A and T1 are connected by a straight line.
- Step width, front halves. Now from B1 it is necessary to postpone to the right 0,1 measures O and add 5 mm - the point will be called the letter D. The length from B1 to B2 will be 9 cm( auxiliary point).Now we need to connect the labels D2 and D with a concave line, and GH2 a straight line.
- Now, to sew a man's briefs with his own hands patterns, you need to draw the back half. The length of the segment T1T2 will be exactly 2 cm. We connect the labels of Γ and T2 by an even line, from the point T2 we continue it above. Now from T2 it is necessary to put upwards 4 cm and put the point A1 so that A1 and T2 are 4 cm apart from each other. A, A1 is connected by a straight line.
- The step width of the rear part will be 4 cm( segment GG1).
- The width of the bottom is 3 cm( section H1H2).
- Now put off from point G1 downwards and to the left 10 mm.Г1Г2 - 10 mm.
- Extend the stepping line of the back half. H3H4 = 10 mm. The H and H4 are connected by a slightly concave line, the points A1 and G2 are slightly convex to the
We cut the product
We need to cut the underwear on the material with a seam on its side. You can cut it in unfolded form without a seam on the side, provided that the width of the fabric allows it to be done.
Important! Perhaps you were asking yourself the question: from what fabric to sew men's shorts or panties? Both that and other products are recommended to be made of cotton material, because it, like no other, lets clean air through it.
During cutting, the material should be left with allowances:
- The hem of the bottom of the panties - 20 mm.
- On the assembly on top - 40 mm
- At 10 mm on the remaining seams.
The elastic should have a width of 3 cm. It is measured around the waist of the man( there should be a slight tension).
Important! Optionally, you can insert a lace together with a rubber band.
to content ↑Making shorts
This section will describe how to sew a man's shorts with your own hands for a beginner's pattern. In fact, sewing shorts and panties for men almost does not differ from each other. For this reason, consider a simpler way of making such a piece of clothing. This method is suitable, if you want to make your man a surprise, why it is not quite convenient to take it from him.
Pattern
In order not to torture yourself with drawing patterns, you can simply take the other shorts of a loved one and circle first the front and then the back halves.
Important! Do not forget that to this all you need to add allowances on the seams of 10 mm and 40 mm on the hem of the bottom and rubber bands.
You will need both the front of the shorts and the back. If you doubt the quality of such work, transfer the pattern to a sheet of paper - it will take a lot of time, but this drawing will serve you more than once.
Important! At will - you can cut a pocket of the desired shape and size, but you must take into account that on top you need to leave the allowance for a hem by 20 mm, and on the other sides by 5-10 mm.
Sewing
When all the parts are cut out and then cut from the fabric, all slices must be machined to ensure that the material does not crumble. Make it better by a lateral seam or a zigzag stitch.
In order to sew the men's shorts, you must follow the above algorithm:
- Smooth the allowances on the pocket to the inside.
- Sew a pocket at the top and sew the same piece of Velcro to it.
- On the back half of the product to sew the second part of the Velcro - focus on where the pocket will be located.
- Sew a pocket to the back of the product.
- Attach the two halves to the sides, sew them together, using a straight seam on the machine.
- Press them in the same direction.
- Lay another decorative seam on the side of the jaw to fix it. This action is done on both legs.
- Sew the step seams, then press them.
- Finally sew the legs on both sides.
- Press the seams in one direction, walk along them with a decorative seam, retreating 5-8 mm straight seam.
- Make the hem bottom of the product.
- Process the top in order to insert the elastic into it.
- After the elastic band is inserted, it must be flushed.
Shorts are ready!
Important! Do not forget to also sew the hole that was left for her.
From this article you learned how to sew men's shorts and panties. Continue to create and please your loved ones with your original works.
