In order not to rack your brains over how to remove shine from trousers, it is necessary to provide appropriate clothing for the garment. Too frequent sock or violation of the basic rules for ironing products can lead to the appearance of traces of gloss on the surface of the fabric.
It's easy to get rid of it, but if the problem arises too often, the process of fiber wear will accelerate several times. Sooner or later, the thing will no longer be subject to recovery, even if its lifetime will be calculated in just a few months.
The reasons for the appearance of gloss on the fabric of trousers and the methods of prevention of the phenomenon
When the sock is too active, the most vulnerable parts of the product first of all suffer: the knees, the inner and the back of the thighs, buttocks. Given the increased mechanical impact, these areas should be treated with extreme caution. Wrong ironing differs in that the gloss is distributed evenly over the entire surface.
If in the first case you just need to reduce the frequency of operation of the product, then in the second you will have to think about how to remove the gloss from the iron. This can be done in the following ways:
- The processing of garments can be carried out only through a layer of gauze or a cut of cotton fabric.
- In a container of water, add a little vinegar( not more than half a teaspoon).Fabrics this does not hurt, but the gloss will cease to appear.
- If the texture of matter allows, then it is better to iron it from the wrong side.
In addition, the sole of the iron should be regularly cleaned and degreased, otherwise it will not be possible to prevent unpleasant consequences even with the help of barrier methods.
Removing the signs of gloss from the surface of the
substance In order to get rid of the unnatural shine of the fabric in one approach, the experienced hostesses recommend the following techniques:
- Steam. The garment is suspended in a straightened state and treated with a steam cleaner or a powerful iron. Then brush the remains of moisture with a soft brush and carefully dry the fabric in the fresh air.
Tip: In the case of a delicate cloth, it is better to do not a local treatment, but a general one. The product is placed above the basin with boiling water or hung in a steamed bathroom. In the rest, we follow the instructions clearly.
- Application of vinegar. You can remove gloss from trousers with vinegar in several ways. If the traces are insignificant, the trousers are soaked in a very weak vinegar solution or wiped with a woolen cloth soaked in it. In case of more serious manifestations of the problem, it is necessary to prepare a compound, one part consisting of water and two - from vinegar. Pour the product into the iron and iron the trousers.
- Cleaning with soap. Cooking is not very concentrated composition of a small amount of soap chips, the product must completely dissolve. In the liquid, we moisten the gauze, through which we iron the areas on which gloss is visible. The effectiveness of the approach will increase if the matter is previously slightly moistened with water with lemon juice or vinegar.
- Treatment of problem areas with ammonia. Helps to get rid of glitz quickly and without unnecessary movements. For a liter of water, take two tablespoons of ammonia, wet the napkin in a liquid and go through the problem areas. Next iron the material with a slightly warm iron through paper or cloth.
- Use of gasoline. In the most difficult cases it is recommended to do the following. Wool cloth is wetted in refined gasoline, impregnate them with problem areas( it is desirable to lay something with the trouser leg).The formed wet areas are wiped with a napkin impregnated with a weak solution of ammonia. Then we wash the trousers in the traditional way, we dry and iron by all the rules. Before ironing, the once shiny areas are additionally treated with a soft cloth brush to restore the position of the villi.
- Effective black tea. Allows you to get rid of unwanted traces on dark fabric and not affect its color. We prepare a strong broth of the product, cool it to a comfortable temperature. Wet the fabric in it, we go through the shiny zones. Then, without washing, we dry the product and iron it through gauze. If necessary, repeat the approach.
If the shine does not pass and after such manipulations, you can try to treat the contaminated sites with pumice stone and only then apply one of the methods again. But this option for the most extreme case, because it leads to the thinning of the fibers. In some cases it's better to turn to dry cleaning than to conduct experiments on your own.
Locos will necessarily return after a while, if not to adjust the process of care for trousers. And with each time to eliminate it will be increasingly difficult, and a positive result will no longer be as obvious as the first time.