Than wash the grout from the tiles without damaging the surface?

Tiles have long been one of the most popular finishing materials for rooms with an increased negative impact of the environment on the surface. She is able to remain attractive for many years with proper care, which presupposes knowledge of what to wash the grout from the tile. But because of inexperience, you can spoil the surface on the first day after its installation.

Prevention is the best tool for

Tiles have different surfaces. Glossy is easy to damage with mechanical cleaning, matte often absorb into itself all at the expense of its porous structure. And some types of grouting lose their beauty after the active cleaning of the walls. To save consumers from such problems, manufacturers of building materials offer various products that help protect tiles from contamination by trowelling.

In particular, these are the compositions of Sopro, which proved to users their effectiveness. Created on the basis of resins, they protect the surfaces of clinker tiles, as well as varieties of ceramic, uncoated glaze, from contaminants. In this case, the water does not absorb into the pores, the dirt particles can not adhere tightly, and the grout can be cleaned from the surface with a light movement of the hand with a soft felt.

In order to use the composition, it is necessary to apply it to the cleaned and completely dry tiles, making sure the glue is completely dry. The result will be achieved in 1-2 days and does not affect the appearance.

Separately prepared relief tiles. Since the decorative elements to clean subsequently will be very difficult, there is a practice of pasting it with a paint ribbon. Use a film of polyethylene, too, you can, but it will not be too convenient.

The grout needs to be cleaned quickly

The materials by which the seams are processed freeze very quickly. Practically within 10-20 minutes they harden. This suggests that it is desirable to act quickly without leaving this occupation for later. In the first minutes, the traces of building mud are removed with a regular sponge and simple warm water from the tap.

For this, you need to gently remove the pollution with light circular motions. The sponge should be washed as often as possible, as well as changing the water. Near the seams work should be especially careful not to damage their smoothed top layer.

However, this option will work fine for preventive measures or for glossy tile surfaces. If the preparatory work has not been carried out, there is a high probability of having a light raid after finishing the harvesting. Most often, you can get rid of it by using an acidic cement cleaner, because it is on its basis that the compounds for seams are the most popular.

Advice

It is very easy to damage seams with such substance, therefore it is necessary to act extremely carefully. In addition, work is necessary in rubber gloves, so as not to damage the skin on your hands, and with open windows - to reduce the ingress of matter into the body with breathing.

You can remove light spots using special felt gloves that are sold in construction shops, but they will not help the relief tile. For her, you can use a terry cloth. After moistening with sunflower oil, it needs to be thoroughly and long to wipe the stains to completely clean the decorative elements.

Epoxy substances - a separate problem

Unfortunately, these kinds of products are of really high quality. They do not take alkali, nor acid, nor even mechanical methods of cleaning. Before wiping the grout from the tiles yourself, contact the repairman who did the repairs for you. Such negligence is not permissible, you must either correct it or compensate it.

If you have to fight alone, you must prepare for serious work. Epoxy resins, specially processed, can at least somehow soften the Litokol remedy. Used and means for removing epoxy paints.

It is necessary to perform a number of actions.

• Seal the joints with a double layer of paint tape to ensure their safety.
• Apply the product to a dirty surface and allow to soak for 5 minutes.
• Gently clean the plaque by working with a metal brush or a well ground knife.

Unfortunately, tiles of poor quality, as a rule, do not stand this attitude, and even on expensive finishing material there are scratches or stains.

Folk methods

A couple of centuries ago the chemical industry with its production of household chemicals was not developed, but the tiles were used widely enough. To clean it, various methods were used, including the use of sulfuric, acetic or hydrochloric acid. In some cases, baking soda was added to them.

For example, the plaque from the grout can be cleaned with a paste for which vinegar and soda are mixed in equal proportions. It is left for 10-15 minutes, after which it is washed with a plaque with a toothbrush( or special tile, the effect will be the same).Remains can be washed off with a damp cloth, and then rubbed dry with a towel.

Unfortunately, you need to consider that during this time the protective coating has become more gentle, and some tools can damage it. Therefore, before trying one or another method on your wall, it is more reasonable to identify a possible final result. To do this, rub a piece of the tile in an inconspicuous place.

As in any case, for the correct and quick cleaning of tiles, you first need to learn how to do this, and only then make the necessary actions. The right information will help to avoid spoiled repairs and unnecessary financial waste.