How to clean the grease filter from the hood and clean the old dirt quickly

In order to be in the kitchen was the most pleasant, and most importantly safe, you need not forget periodicallywash the filter from the hood. It is this part of the design that collects all the unpleasant odors, fumes and fat. If you do not clean filters in time, they will lose their functionality, and accumulated and frozen fat will only worsen the interior of the kitchen.

It should be remembered that if you do not wash the old fat in time, it can get on the burners, which in the end can cause a fire. Before cleaning and removing dirt from the grease filter from the hood, read the operating instructions for the appliance. Precisely this precaution will avoid possible damage.

Preparatory stage

Before proceeding directly to the sink washing, make sure that the appliance is disconnected from the mains. In order to remove the hood cover, it is necessary to unfasten the clips and pull it out of the slots. The filter is then extracted. The pipe that extends from the hood to the vent should also be removed and washed. Then the air filter is removed. The hood is also checked for contamination and washed if necessary.

The easiest way to wash the fat

Wash the hood should be at least 1 time per quarter. If the landlady uses the household appliance permanently, then the cleaning work should be carried out more often. Wash filters in this case is recommended at least 1 time per month. Before proceeding to the treatment of the hood, the site mschistota. en recommends carefully reading the instructions to the device. It indicates what means are allowed to use for cleaning, and what kind of household chemicals should be discarded.

Clean the soot from the filter easily with manual cleaning or using a dishwasher. In the first case, the detergent is diluted with water at a concentration of 1: 4.For 30 minutes all the components are placed in a soapy liquid, and then scalded with boiling water. If necessary, the structure should be wiped with a soft cloth. When using the dishwasher, it is recommended to wash the filter at minimum temperature, with delicate detergents.

Household soap

If the previous methods of cleaning did not give the desired effect, then it is worth trying folk methods in combating soot. Household soap( which includes 72% of fatty acids) will help effectively overcome fat. To prepare a detergent, you should take half a piece of soap, as well as 2-3 liters of water. Preliminarily, the soap is rubbed on a large grater and poured with boiling water for 30 minutes. The solution then processes the problem areas on the grate, the filter, and also the grid. After a few minutes, the surface is machined using a sponge, metal or plastic scraper.

Lemon juice

Lemon juice or a piece of citrus will help to cope with fresh contaminants. Pre-juice is dissolved in a small amount of water and wiped them with a problem area. The same procedure is actual to repeat with a slice of lemon, using it for surface treatment. Lemon juice should be allowed to soak in the fat and after 10 minutes, wipe the filter with a damp cloth. If the first time to get rid of dirt did not work, you can perform the procedure several more times to achieve a full result.

Soda and ammonia spirit

When using the following method, it will be very easy to clean the problem areas. The cleaning process includes such steps:

1. It is necessary to take a pan in which to fit the filter from the hood. The container is pre-filled with water and brought to a boil.
2. Add 1 teaspoon of soda to the liquid gradually. It is recommended to pour half a cup of powder into the water.
3. For a few minutes the filters fall into a pot of boiling water. Soda effectively helps to dissolve grease and dirt. After 2-3 minutes the container is removed from the fire. If the procedure did not give the proper effect, then it must be repeated again, again throwing soda into clean water.
4. In the most difficult cases, sodium hydroxide is used after soda.0.5 cup of the solution is dissolved in 3.5 liters of hot water. Put the filters in a container with this tool is recommended for 15 minutes.

Important
Do not forget about safety. To protect your hands from the solution, nose and lungs from vapors, and also to get rid of the unpleasant smell more quickly, be sure to work with gloves and a mask, first open the window in the kitchen.

Before you start cleaning the surface, it is worth making sure that it is amenable to washing. There are filter models that can not be cleaned, since they are disposable. If you first study the instruction on the operation of the hood, it will be easy to save yourself from unnecessary waste of time.

Salt solution

Having resorted to table salt, it is also possible to get rid of old dirt. To prepare a concentrated solution, take a sufficient amount of salt, pour a little water on it and lightly heat it on the fire( without boiling).In the container with the solution, it is necessary to lower the filter and other small parts from the hood. Then the surface is recommended to be rubbed with a sponge and rinsed under clean running water. In the case where it was not possible to wash the filter with brine, you should wipe the contamination with dissolved in water lemon acid or lemon juice.

Vinegar

In the fight against old-fashioned soot, concentrated acetic acid is perfect. It must be applied to the problem site for 10 minutes. After this, when using a thick sponge, you must remove the fat that has dissolved. When removing fresh dirt from the grease filter, dissolve the vinegar in water, in a ratio of 1: 2.

Advice
Resource mschistota.ru recommends before using any folk remedy to pre-prepare a metal surface. The main layer of fat is topically removed by mechanical cleaning. For this you can take a sharp knife. Cleaning the soot, you should be extremely careful and do not touch the point of the surface of the parts. After finishing mechanical cleaning, removing the remaining fat by household remedy will be much easier.

Household chemicals

In the most difficult cases, when all the folk ways did not give the desired effect, it makes sense to try more aggressive substances.

Cleaner for water pipes( as a rule, concentrated alkali - work only in gloves!) Will effectively eliminate the contaminants that appear on the fat filter. The main disadvantage in this method is that it can be used no more than 1-2 times for the entire period of operation of the hood. If you use the cleanser often enough, the alkali that is contained in the product can damage the metal surface.

This process of cleaning the grease filter involves the use of rubber gloves, stainless steel sinks and pipe cleaners. The necessary amount of detergent is poured into the sink, the filter is placed for 5-10 minutes. Then the structure is washed several times under running water( until the solution completely disappears from the surface).

Cope with soot, which worsens the appearance of the hood, will allow one of the above methods. Remove fat from the surface will be much easier if the extract is washed with detergent once every 2-4 weeks. Secure yourself while cleaning the fat filter easily by putting on rubber gloves.

When working with acids or alkalis, do not forget to open the window in the kitchen for airing. Washing fresh fat will be very simple, using the usual detergent for dishes and a sponge. In difficult cases, it is important to scrape the top layer of fat with a sharp knife or scapula, and then remove the contamination with a suitable agent. Before cleaning the surface, you should carefully read the instructions on how to use the appliance correctly.