You can put a refrigerator next to the stove or not - damage from the gas stove

The kitchen of a small area requires some ingenuity from the apartment owners, because you have to carefully consider the location of the individual parts of the kitchen unit. Most of all, doubts are caused by the placement of the refrigerator next to the stove - can you put household appliances in this way or will it damage the technology? Unsuccessful location does lead to negative consequences. However, they can be prevented.

Consequences for the refrigerator

If you put a plate next to the refrigerator, then more damage will be applied to the latter. We'll figure out how the technique might suffer in this case.

• Standing next to the gas stove, the refrigerator does not start working any worse. It is isolated, therefore external influence will not affect the temperature inside. But if its surface heats up more warmly, then to maintain the necessary temperature, the unit will work in a strengthened mode. Because of this, the consumption of electricity will increase. In addition, the increased load on the compressor will significantly reduce the life of the device.
• Insufficient distance between the refrigerator and the cooker may cause uneven cooling. Due to the heating, even on one side, the compressor will start to work harder. Thus, the heating is compensated in that part of the device next to which there is a plate, and the temperature there will become normal. But on the other half, where no such strong cooling is required, ice will appear. And the difference in temperature is not good for products.
• Another reason not to put the stove next to the refrigerator is purely practical. During the preparation of food, droplets of fat scatter in every direction. If the location is incorrect, there will be a refrigerator under the gun sight, which will have to be washed several times a day.

You, probably, reflect, whether it is possible to put an electric cooker near to a condenser, after all such harm bring only gas plates. Although electric heat nearby items are weaker, they should also not be kept in the neighborhood of other household appliances. But precautions when placing this kind of plates are less strict, as will be discussed in more detail below.

Other effects of

You may be lucky and the small distance between the refrigerator and the stove will not cause a reduction in the service life of the equipment. But other shortcomings of this neighborhood will be noticeable very quickly.

• It is not as convenient to take out food or clean it, as if the stove from the refrigerator were separated by a table.
• Knobs of the frying pans will either rest against the wall of the unit, or protrude into the passage. But this also takes away space in the kitchen.

But for the aesthetic component you do not have to worry. On the contrary, similar in style to the stove and refrigerator, in addition to performing their direct functions, they can complement the design of the room.

How to properly position the refrigerator and

How to protect household appliances and optimize its location in the kitchen? It is believed that the minimum distance between the refrigerator and the stove should be twenty centimeters.

The magazine "Miss Purity" advises: check the instructions for your equipment, as different models have different standards. For example, Bosch recommends placing the gas stove at a distance of thirty centimeters. Manufacturer Zanussi in the instruction indicates the value of fifty centimeters. Between the technics the table just will fit, thanks to what to prepare becomes much more conveniently.

But for electric ranges the distance is completely different, since they heat the units standing next to them several times less. For the company Bosch has an opening of three centimeters. Zanussi - five.

How to protect the refrigerator

If you can not install the necessary distance between the refrigerator and the stove, care must be taken to create an insulation that will minimize the damage.

A large number of materials are suitable for the manufacture of insulation. They can be divided into two large groups. All of them have advantages and disadvantages. Unfortunately, there is no ideal material for isolation yet. But the installation of protective sheets does not require a lot of time and money( although there are expensive materials), so replacing them as needed will not be a problem.

Insulation products are divided into two groups:

• organic;
• inorganic.

To organic include:

• polystyrene;
• chipboard;
• reeds;
• textolite;
• cork sheet.

Pros of insulation of this type:

• non-toxicity( which is important, because the sheet will always be affected by high temperatures);
• moisture resistance.

Cons:

• the probability of deformation due to heating, which makes these materials unsuitable for the refrigerator that is located near the gas stove;
• high cost.

The list of inorganic materials is somewhat smaller:

• fiberglass;
• drywall;
• mineral fiber.

Positive aspects of inorganic materials:

• Low price;
• Resistance to temperature.

Negative:

• With high humidity, this insulation becomes useless.

It's easy to install protection. And, as it was said above, there is a possibility that the isolation will have to be changed from time to time. Therefore, it is best to use a double-sided adhesive tape for fastening. It will hold the sheet firmly, but it will not be difficult to remove it. If you use organic materials, they should be covered with a film to improve the appearance.