The first wash in a new washing machine

Here is finally made a long-awaited purchase - a typewriter appeared in the house. Now, in order for her to become a permanent helper, one must be able to properly take care of her. In different machines, management is different, but nevertheless, there are common points that need to be considered in order to properly organize the process. One of these is the first wash in a new washing machine, which we will discuss in detail in this article.

to the contents ↑

Instruction of

The first washing in a new washing machine is not a chaotic push of buttons, but a thoughtful reading of the operating instructions. Particular attention, of course, is given to those items that the manufacturer specifically marked as "important".If the instruction was not followed, you can say goodbye to the new favorite on the first day.

to the contents ↑

Is the machine ready for operation?

Of course, the sequence of the first wash is described in the instruction. Moreover, the first launch of the LG washing machine is practically the same as the other models:

1. Absolutely in all units it is necessary to remove the transport bolts. Their purpose is to fix the drum of the styrant during transportation.

Important! The machine must be stable, otherwise problems may arise during spinning. The installation site must be flat and firm.

1. After the bolts are removed, holes are left, which are closed by means of special plugs, which are always equipped with such a technique.

Important! Before running, you need to determine the hardness of the water in the water pipe. With the help of such an analysis, it is possible to optimally select the powder and its amount.

1. The quality of the machine's connection to electrical, plumbing and sewerage networks is checked.
2. The faucet leading to the filling hose is checked. It must be open.
3. Dirty laundry is put into the drum.
4. The powder is filled into the dispenser in the required quantity.
5. The program is selected, if necessary - the temperature is selected.
6. Press the button to start washing.

Important! After the end of washing, the new washing machine will not allow you to open the door immediately. In this case, do not worry - the lock has worked, the opening will be possible in a couple of minutes.

Separate nuance

Many experts recommend that during the first wash do not put linen in the machine. All other actions are carried out exactly as described above, only the powder is also laid in a smaller amount.

Important! Of course, all washing machines are tested before they are released from the factory, but washing "idle" will allow washing it from the inside. This move will save clothes from the possibility of an unpleasant smell.

to the contents ↑

How to operate the washing machine correctly? Of course, the first start-up of a washing machine is of great importance, but it is equally important to keep an eye on it. If you follow the tips below, the machine will last for a very long time after purchase:

• If atypical strange sounds are heard from the device during the initial start-up, you do not need to try to repair it yourself. At it - warranty service and repair should be carried out free of charge. It is enough to dial the number of the service center indicated in the documents and explain what happened. The master or the assembly will necessarily be returned for repair.
• Do not use powder for hand washing for automatic machines. Use only a specially formulated product. Otherwise, the effect of increased foam formation will disable the unit.
• You can not allow overloading, as the device may simply not work, and if it starts, the parts will wear out more. Some functions can be refused, for example, spinning.
• At the bottom of the housing there is a drain valve, which needs regular cleaning. Otherwise, the drain hose may become clogged.

Important! Before laying the laundry in the drum, you should always check the pockets - there should not be any small things in them. Because of the small size, they can get into the gap between the tank and the drum, which will cause the latter to jam.

• After finishing washing it is necessary to leave the hatch open. This is necessary for ventilation and drying of the remaining moisture. Otherwise, it is possible to form mold and produce an unpleasant odor.
• The descaling agents should be selected very carefully. If they are of doubtful origin, they can lead to the destruction of the oil seals, and further - and the bearings. It is also possible to destroy the coating of some parts.

Important! Washing and cleaning of the washing machine must be carried out separately. Be sure to follow the instructions to the product.

Now you are convinced that the first wash in a new washing machine is not a complicated action. Adhering to the above rules and advice, from the second wash you can get from the pile of dirty linen an armful of things that smell fresh and clean.