Reasons - a washing machine does not squeeze

Unfortunately, nothing is perfect and nothing lasts forever - everything has its expiration date. Under the exception, all electrical appliances were not included, and in this case - washing machines. What to do if the washing machine does not start the spinning process during the washing process. Let's look for the cause - the washing machine does not press, how to fix it?

to the contents ↑

The most common reasons for not spinning the

linen The modern technology is a complex device made up of many components. Therefore, the reasons why the washing machine does not wring out can be associated with the incorrect work of its various parts:

• A blockage in the filter of the drain pump has formed.
• A nozzle obstruction that leads from the tank directly to the pump.
• If a sufficiently large foreign object enters the pump impeller and jams, the pump can not rotate.
• A clog formed inside the drain hose.
• The siphon or sewer system is clogged with foreign garbage.
• The drain pump is defective.
• Wear of motor brushes.
• The motor is defective.
• Malfunction of the heater element of the heater.
• The electronic module is faulty.

to the contents ↑

The program you use turned out to be incorrect

If you notice that your washing machine does not press, one of the reasons for this may be that you used the program where the laundry was not spin-off.

Important! Such programs can be: wool, gentle washing, silk.

Take the instructions to your washing machine, read it and find the exact description of the program with which you washed clothes. If the program does not provide for a spin process, then you have no problems. Next time, just select another program or do not pull out the laundry, but simply start the spin function separately and watch the result.

There may be a different situation when the program presupposed, but the machine still finished the program, and did not wring out the laundry. In this case, check that you did not deactivate the spinning force, before starting the washing process.

Both these problems have nothing to do with damage to the equipment and can occur due to a banal inattention.

to the contents ↑

Unbalance or overload of the washing machine

If your washing machine is not equipped with the function of determining the imbalance or overloading the laundry, there may be minor problems during washing when the laundry is unevenly distributed in the drum or is extremely large andvery heavy.

Typically, in these situations, the machine leads as follows: at the moment when the spinning process should begin, the machine wants to spin the drum, but it does not work. Similar attempts are repeated several times. Even after the washing machine could not press the laundry, it completes the washing program. In the end, you get absolutely wet clothes.

Important! In the event that you have this situation, then you do not need to panic - simply remove half the laundry from the washing machine, distribute it evenly so that there is no lump shape, and start the spin function again.

to contents ↑

Washing machine does not squeeze the laundry due to the water in the tank

Before starting the spin program, the machine must necessarily drain all the water from the tank. It also drains the water that flows out of the laundry during spinning. That's why if your washing machine does not drain the water for nothing, then you should look for this reason.

What you can do: unscrew and then clean the drain filter of your washing machine:

• If in the middle of it you find foreign objects, then eliminate them.
• If the cause does not lie in the drain valve, check for foreign objects a drain hose and drain pipe that pushes its way from the tank directly to the pump.

Important! Eliminate the blockage and again check the efficiency of your washing machine.

to the contents ↑

Problems with the control module

The control module is the so-called "brain" of the washing machine. It is this module that manages absolutely all programs, receives all signals from all sensors and, depending on the signal, issues orders to the executing elements.

Check the control module yourself you will hardly. But in the event that your washing machine has stopped squeezing the laundry, and you have checked all the above mentioned breakdown opportunities and realized that everything is all right, there is only one reason - this is a breakdown of the control module.

Important! Unfortunately, fix this problem is not so cheap - the cost of the module itself is quite high and it's better to ask a knowledgeable person for help with this problem. Call the repairman who repairs the washing machines and invite him to his home - he will repair the malfunction.

to contents ↑

Sensor malfunction, which is responsible for the water level

Pressostat - is called "sensor of control" in another way. The function of this sensor is to inform the control module of the machine about the state of the water level. Receiving the necessary data, the control module decides whether it is necessary to spin in this wash or not. Accordingly - when the signal does not enter the brain of the device, the washing machine begins to press badly. What is to be done in this case? How to eliminate the breakdown?

Ask for help in the workshop - experts are required to help.

Important! Most likely, in your washing machine you just need to replace the sensor, which is defective.

to the contents ↑

Malfunction of the sensor responsible for the engine speed

The pickup, which also has a different name, namely the "speed sensor".The towbar is located directly on the engine of the machine, and if to be specific - on its shaft. The functions of this sensor are to control the number of revolutions produced. The time for control is one minute.

Due to a malfunction of the sensor, the automatic machine does not have the ability to develop the required speed. Now it became absolutely clear to you why your washing machine does not start wringing out the laundry due to a malfunction of the tachodchik.

Important! It is extremely rare to meet such a breakdown.

What actions should you take?

1. Check the mounting. If you find that it is weak - be sure to tighten it.
2. Also pay attention to the wiring and contacts.

If you are unable to do this yourself, ask for assistance in the workshop. There you should help to replace the sensor.

to the contents ↑

How do I test a washing machine pump?

If there is a suspicion that the reasons why the washing machine does not wring out lie in the pump's malfunction, you need to check it. To do this:

1. With the machine off, unscrew the filter.
2. After that, plug the machine into the mains and start the program of draining and spinning, you can set the programs one by one. Only do not connect water - the pump must work idly.
3. The program is running, and if your pump is still working, the impeller will rotate. You can just look at it through the hole of the filter you unscrewed.
4. If the impeller still does not rotate, your pump has definitely become unusable.

It can not be said that this is the most common situation, but it is better to replace only one pump than understand that it is necessary to repair the entire system.

From this article you have learned in detail about all the reasons why a washing machine does not wring out laundry. We hope that you managed to find a specific malfunction and neutralize it on your own.