Which sole of the iron is better?

Despite the fact that today you can buy clothes that are very practical and do not crumple, even after washing, in the wardrobe of any person there are things that require careful ironing. In addition, it is advisable not to ignore the ironing process when cleaning bed linen, children's textiles, so you need to decide which sole of the iron is better to choose the right technique. Properly picking the device by this criterion, you will greatly simplify the whole process of ironing and spend a minimum of time and effort on it. So, what are the soles of irons and what are the pros and cons of each option, you will learn from this article.

to content ↑

Selection criteria for

Before considering the characteristics and properties of each possible material of the soleplate of an iron, it is necessary to determine what requirements it must meet. The most significant in this respect are the following:

1. The quality of the impact on the fabric. Here everything is extremely simple, as the effect of the surface of household appliances on the material of any product is more careful, the longer things will remain intact and attractive.
2. Degree of friction. This is an important criterion in determining which sole of the iron is better, since the ease of sliding through the textile directly affects the speed of smoothing the material and the amount of effort you put.
3. Quality of protection against damage. Here we mean not only resistance to mechanical cracking, scratching, but also to such phenomena as corrosion, lime deposits, deposits.
4. Warmness uniformity. To make it convenient for you to operate a household appliance and ironing even dense and voluminous products did not take a lot of time, the best sole of the iron should be perfectly heated over the entire surface area.

Important! It is these criteria that will determine the organization of the characteristics and properties of a material in order to understand which sole for the iron is considered the best.

All these criteria will be determined by 2 basic parameters - this is the shape and material at the base of the surface. Below we will consider in more detail which sole for the iron is considered the best for each of these items.

to the contents ↑

Shape of the

outsole Before specifying what material of the sole of the iron is better, you must immediately decide on a more acceptable form of surface for you. This is much easier to do, therefore, it is worth paying attention to this parameter in the first place.

So, what recommendations will there be?- They are very simple to understand, as everything depends on what products prevail in your wardrobe and what you most often need to iron:

1. It's more convenient to spread the children's underwear, clothes, shirts and blouses with a sharp spout.
2. Bedding, larger products easier to straighten after washing with a machine that has a smoother shape with a blunt, rounded nose.

Important! As for the surface area, it is quite natural that the more the sole of the iron, the less time, effort, energy you will spend on the process.

to the contents ↑

Materials

If you decide on the shape and size of such household appliances simply enough, then the materials are much more complicated. The whole hitch is that modern manufacturers supply the widest range of devices for sale, at different prices, with different characteristics, a set of functions. But in addition, the range of materials from which the soles of irons are made is extremely wide.

Important! To decide for yourself which sole of the iron is better, check out the main advantages and disadvantages of each option - this information is outlined below. All the advantages and disadvantages correlate not only with the theoretical capabilities of the device, but also with personal household preferences. For example, how often do you basically iron, how much linen you have accumulated, what kind of things, what materials. Only with this approach you can make a rational choice without overpaying for unnecessary characteristics.

Ceramics

Ceramics today is used for the manufacture of various household appliances and has become very popular. Ironing machines are not an exception, but is it possible to say unequivocally that an iron with a ceramic sole is the best choice? To do this, we evaluate its characteristics.

Pros:

1. Very light gliding on the fabric.
2. Does not wrinkle the fabric during ironing.
3. Ideal surface smoothness, which does not cling materials and does not form a tightening on it.
4. Easily cleansed of any impurities - including carbon deposits.

Cons:

1. Relative brittleness - for all its durability, the ceramic can easily be pinned down with a direct impact or fall of the device.
2. In case of mechanical damage - scratches, chips, cracks, the ironing process becomes very laborious.

Important! Among all the rich assortment of such household appliances, you can hardly find pure ceramics. Most models have additional reinforcing agents, mostly metals such as steel or aluminum.

Metal Ceramics

Metal ceramics is an excellent alternative if you choose which soleplate iron is better - pure ceramics or composite. The popularity of such material is due to its advantages.

Advantages:

1. Higher threshold of mechanical strength.
2. Easy sliding.
3. Convenient maintenance, when it becomes necessary to clean the surface - it is more resistant to different media and easier to remove dirt.
4. More extensive design possibilities.
5. Absolutely ideal heating of the entire surface area, which is achieved by including heating spiral elements to the device of the device.

Disadvantages:

1. Risk of mechanical damage and loss of a part of the properties with direct mechanical action on the surface.

Important! Solving the problem of non-ideal strength is solved by different manufacturers by including transverse strips cast from steel. The results of such a technology of production of household appliances deserve attention, but the price of irons with similar design features is much higher.

Aluminum

Aluminum is one of the most demanded metals for today, which is used in various industries, construction, in the manufacture of equipment and household appliances. When deciding which sole of the iron is better, you should definitely consider this option, since the cost of devices with such an ironing surface is more than budget.

Pros:

1. Light weight, which makes it possible to create devices with a large surface area, which in no way affects the user's convenience during use.
2. High thermal conductivity, due to which the sole heats up very quickly, which makes it possible to begin the ironing process in a few seconds after the appliance is switched on. It cools the sole just as quickly, which contributes to a high level of safety.
3. Maneuverability, which is caused again by light weight and various forms of the sole. The model range of such household appliances is very wide.

Cons:

1. Deformation tolerance.
2. Risk of mechanical damage if the equipment operation rules are not observed.
3. On some tissues can leave shiny traces, so when ironing, in most cases, use lining material, for example, gauze.

Important! To level these disadvantages, manufacturers create double soles - with the inclusion of ceramic mass or create reinforced surfaces by applying an oxide film using anodizing technology. This sole of the iron is distinguished by the golden color of the surface, and the device is not much more expensive.

Stainless steel

Stainless steel is another demanded metal that is used in a wide variety of industries - from the construction of large-scale structures to the manufacture of household items, such as dishes. Devices with such an ironing surface boldly occupy a leading position when consumers are asked by questions which sole for the iron is considered the best.

Advantages:

1. Ideally smooth sliding on the fabric.
2. High speed of smoothing even very strong creases and creases.
3. Mechanical strength, which determines the durability of the entire device.
4. Resistance to rust formation on the surface.
5. Acceptable price.

Important! As for the cost, such household appliances will cost a little more than aluminum analogs, but cheaper than devices with any other materials that are used to make the sole of the iron.

Disadvantages:

Relatively heavy weight, which can affect the convenience of ironing, if there is a thorough processing of a large number of large products.

Important! To further extend the life of the device and give a more aesthetic appearance that would meet all modern requirements, many manufacturers additionally cover the steel alloy with chrome or sapphire spraying.

Teflon

Teflon is similar in properties and characteristics to aluminum. Therefore, if the choice as to which sole of the iron is better, in this case will depend solely on the consumer's preferences.

Pros:

1. Easy sliding.
2. High speed of material smoothing.
3. Non-stick properties, which eliminates the formation of deposits on the surface and contamination of ironed materials.
4. Light weight.
5. Easy cleaning with the use of suitable tools.

Cons:

1. Direct mechanical impact by abrasive cleaning agents, sharp objects, as the coating very easily scratches and loses its original properties.
2. Exacerbation in care.

Titanium

If you are in search of what sole of the iron is better and are ready to invest in the purchase of a really high-quality device, the answer will be unambiguous - it is household appliances with titanium coating. How is it beneficial, given the high cost of the devices?

Pluses:

1. Durability.
2. Perfect glide on any type of fabric.
3. Excellent thermal conductivity, which ensures the fastest heating and cooling of the device.
4. Resistance to any mechanical impact, including direct impact, falling, impact of abrasive substances.

Important! Disadvantages such irons in terms of performance are not.

to the table of contents ↑

Manufacturers of irons - which are better?

Each manufacturer has in its lineup irons with soles of different materials. But at the same time one succeeds in producing household appliances to achieve better results in a certain direction. Therefore, once you have determined which sole of the iron is better for you, choose a device of a specific brand, whose dignity is appreciated by consumers.

In this case, the recommendations will be as follows:

1. Ceramics - the best manufacturers are Vitek, Tefal, Bosch.
2. Metal ceramics - here definitely one should give preference to the trade mark Tefal.
3. Aluminum - the most advanced instruments can be found among the range of manufacturers Rowenta and Philips.
4. Stainless steel - the best are Braun, Vitek, Rolsen, Panasonic, Scarlett.
5. Teflon - give preference to Bork, Kenwood, Atlanta or Unit.
6. Titanium - quality models with this type of coating you will find among the range of brands Panasonic, Philips, Bork.

to the contents ↑

Useful advices:

1. When choosing a good device, pay attention to the shape of the rear part - that the iron does not crinkle the fabric during the smoothing of the product, the rear should have a rounded structure.
2. Pay attention to the nozzle of the device - it should be as sharp as possible so that you can easily smooth out hard-to-reach places.
3. If you plan to use the steaming function frequently, give preference to the iron, on the sole of which is evenly distributed over the entire hole area. The more of them, the better.

Now you know about what are the soles of irons and what are the advantages and disadvantages of each kind. We hope that after reading our review you could easily decide which sole of the iron is better and now the ironing process is not a compulsory routine service for you, but a real treat. Good luck!