How to clean a washing machine from mold and black fungus quickly at home?

The question of how to clean a washing machine of mold and black fungus quickly at home is given by an incredibly large number of housewives. This is because they do not know how to prevent the appearance of this black fungus. After reading this article, you will learn: how to remove mold from the washing machine, how to prevent its appearance, and also you will learn the reasons for which it appears.

to the contents ↑

Where to start?

In order to successfully clean the washing machine from mold, it is necessary to find all the places on which an unpleasant fungus has settled down. First of all, inspect:

• rubber seal, which is located around the door;
• tray, designed for dispensing powder, as well as rinse aid;
• hose that leads from the tray to the washing machine's tub;
• drain hose and filter on it.

All that is possible, it is necessary to try to clean the mold of ordinary detergent and brush. After this, all these places must be carefully processed, strictly following the instructions, a special means for removing the fungus.

But black mold can also settle on the surface of the tank walls. How can I clean hard-to-reach places, and even those to which your washing machine can not get spare parts for parts? How does the cleaning work in this case? In order to successfully clean up the most inaccessible alleys of the unit, it is necessary to understand why mold appeared in the machine at all.

to content ↑

Causes of

fungus The most common unpleasant black mold appears in the washing machines of those housewives who are overly prone to all kinds of savings and prefer to wash things in a short wash mode, exposing a low temperature. If at the same time, there is no timely cleaning of the parts of the machine from scale, no powders are used, which include bleach, a lot of rinse aid is applied, then black mold practically receives a "VIP invitation" to a permanent habitat. Accordingly - there is a question, how to get rid of mold in the washing machine-machine?

This phenomenon is related to the fact that:

1. During the installation of low washing temperatures, the disinfection of the unit does not proceed. Up to a temperature of 60 C, the spores of the fungus feel just fine, and the colonies that have appeared do not suffer from excessive heating.
2. Absence of chemically active elements, which, as a rule, are bleaches, enhances the comfort level of the fungus. Also, a not too high-quality rinsed linen softener will leave a mucous coating on the walls of the apparatus, inside which the spores are perfectly fixed, and then turn into new mold molds.
3. Damp plus heat is what every mold would dream of, if it had such an ability. What to do in order to get rid of the scourge and permanently clean the washing machine of mold and black fungus quickly at home?

to the table of contents ↑

Means of struggle: cleaning the machine and preventing the emergence of mold

In order to clean your washing machine from black plaque and prevent the fungus from returning to a habitable place, it is only necessary to deprive it of comfortable living conditions. Fungus can not stand acid, high temperatures and dryness. Therefore, in order to remove the mold from the washing machine, act on it with acid, high temperature, and on top - carefully dry the machine.

How to do it and what to apply:

• To eliminate the invasion of the fungus is possible with the help of ordinary citric acid. Pour a small amount of citric acid on the sponge, wipe it with the affected area, then give the citric acid to work on the fungus and wash it off.
• Wet the rubber cuff with a light solution of copper sulfate - it excellently neutralizes these harmful microorganisms. Leave in this form for 24 hours. After this, rinse very thoroughly with water using a detergent.
• In the extreme case, you can use this method - take out the washing machine in the sun. Or, treat it with artificial ultraviolet rays.
  

Step-by-step procedure for the application of bleach

Some desperate hostesses, in order to certainly clean all the details from black mold, pour bleach and vinegar at the same time. But this method is very radical - it can not only clean the details, but also bring them out of the working order. If you decide to clean the washing machine of mold and black fungus quickly at home with chlorine, proceed as follows:

1. Turn on your washing machine for the longest possible washing period, putting the maximum temperature.
2. Pour 1 liter of chlorine bleach into the detergent dispenser - the usual "Whiteness" is suitable.
3. At the moment when the temperature reaches its maximum value, stop the cycle of washing for 1-2 hours.
4. Allow the machine to complete the washing process.
5. Fill 2-3 tablespoon vinegar with 9-11% into the dispenser, and then turn on the machine for rinsing.

to the contents ↑

Cleaning external parts

In case the fungus was found on time, measures must be taken immediately. If we allow the beginning of the development of harmful microorganisms, cleaning the washing machine of mold, all the more, a very simple and quick method, will not bring the desired result. It is necessary not only to call a specialist in the repair of washing machines, but even replace the damaged parts, and this is not a cheap treat.

Cleaning the washing machine against mold is a very simple and quick way to

Before cleaning the machine, you should find out where the fungus is located and proceed as follows:

• To begin with, clean all places affected by mold with a stiff brush using simple detergents, and only then use the drug, which is designed to remove the fungus.
• If you can not find the drug, it will replace soda with great success, to which you will need to add a small amount of water, and then the resulting paste to clean the device, not missing a single detail.
• After this, without washing off the remedy, leave for 30-40 minutes.
• In the end, wipe all very thoroughly with a damp, then with a dry cloth.

These methods will help you clean the washing machine of mold very effectively - even the most spread out black spots will disappear. Whether for a long time - it already depends on you. Just do not create a comfortable living environment for the fungus, and you will no longer see it inside your hardworking assistant. And this means that you will no longer have to use radical means to clean the tank of mold, which has carefully settled inside your washing machine.