Replacement of the bearing on the washing machine Indesit

In the modern world of advanced technologies, a washing machine is available in almost every home. However, any technique has a property to wear out and break, and therefore each user sooner or later thinks about changing the bearings that are the basis of the mechanism. This procedure is quite complex and responsible, and therefore improperly performing it can lead to a permanent breakdown of the household appliance. In this article, we will tell you how to replace the bearing on the washing machine "Indesit", what are the features of such works.

to the contents ↑

When to replace the bearing in a washing machine Indesit?

Before you start repairing a household appliance, you need to determine if the problem is really with the bearings? To diagnose without disassembling the cabinet, use the following guidelines:

1. Achieve the rotation of the drum of the Indesit washing machine at the highest possible power. To achieve this goal, set the mode of the most intensive spinning of the laundry and listen to the sounds produced by the device. If the problem really is the integrity of the bearings, the part will necessarily deliver itself.
2. To ensure that the strange sound does emit the bearing, disconnect the appliance from the mains. After removing the laundry with your hand, rotate the drum in different directions. If you hear the screeching of metal and knock, then the bearing came out of action.
3. Check if moisture accumulates under the bottom of your appliance. If a small puddle is regularly formed there, the problem lies in the movable element of the drum of the washing machine.

Replace the bearing on the washing machine "Indesit" under the power of almost everyone who understands even a little about the technique. However, before you start repair, you must prepare all the tools that you can use in such a difficult matter.

to the contents ↑

What can I need?

If you need to replace the accessories of a household appliance, then first of all, visit the company store or service center and purchase the original set of seals and bearings from the company Indesit.

Important! When buying an original set of parts, you can be sure that they will fit your model of household equipment. It should also be taken into account that the bearings and the stuffing box are a single system of the fastening unit, and therefore their replacement should be carried out in a complex manner.

To replace the drum bearing of the Indesit washing machine, in addition to the new parts, the following tool kit should also be prepared:

• hammer;
• cross-shaped screwdrivers with long and short rods;
• car keys and heads;
• pliers;
• bearing grease;
• hex wrench;
• wooden bar.

Important! Before you start repairing the stilalki, prepare the appropriate place. It is important that you have enough space not only for free movement, but also for placing all the components of the dismantled unit.

to the contents ↑

Replacement of the bearing of the washing machine Indesit with your own hands

At the initial stage of the repair, you will carefully remove the rear and front walls of the household appliance.

Important! When performing this task, it is important not to damage the sealing grommet installed on them.

Dismantling the rear wall of the

Work on the housing should be started by removing the top cover of the washing machine. To accomplish this task, use a screwdriver to unscrew several fastening bolts. After carrying out these actions, the rear wall of the household appliance is removed quite easily and quickly.

Removing the front wall

For the correct and safe removal of the front wall, follow these guidelines:

1. Remove the container for powder and gels. To do this, pull the cuvette toward you until it reaches the stop, and lifting it slightly upwards - take it out.
2. Find and unscrew the fastening elements of the structure that fix the front panel.
3. Remove all screws that hold the front wall of the Indesit washing machine.
4. Remove the rubber cuff and remove the hatch lock.
5. Detach the front wall of the appliance.

After dismantling the body of the washing machine, you gain access to its interior.

Removing the drum:

1. For free continuation of subsequent work, remove the belts from the drive motor of the washer and drum pulley.
2. Ensure the pulley is securely fixed in a stationary state by inserting a pre-prepared wooden block into it.
3. Unscrew the main fasteners, carefully remove the part and remove the spacer bar.
4. Having disconnected all wires from electrical parts, proceed to unscrew the fasteners of the mobile unit, which is responsible for the fastening and normal functioning of the drum.

Important! Quite often the screws in this part of the device are covered with rust and "stick" to the metal. This can be explained by the intense effect of moisture on the structural elements. For easy and convenient extraction of fasteners, pre-spray them with WD-40.

Drum disassembly and bearing replacement

This repair phase is the most responsible and must be performed according to the following algorithm:

1. Remove the tank retaining clamps.
2. Carefully remove the gaskets and the immediate cover of the tank of the Indesit washing machine.
3. Pull out the drum with the movable assembly, which is based on the bearing from the tank.
4. We knock out the worn-out bearings ourselves or call for help from specialists of the nearest car-care center.

Important! Self-knocking out is risky enough and requires special tools, but car service masters will do this job quickly, efficiently, safely and inexpensively.

1. Install the new oil seal and drum bearing of the Indesit washing machine.
2. We are assembling the household appliance, observing the reverse order of actions.

In this article we have shared with you the recommendations and detailed instructions on how to replace the bearing in the washing machine "Indesit" with your own hands. Sincerely we hope that in future the household equipment will continue to please you with good work for a long time.