How to clean the iron from the carbon at home?

To look beautiful, things must be a priori clean, whole and well-ironed. But if the sole of the iron is contaminated, it is difficult to follow these simple but so important rules. And if this is the situation, you just need to know how to clean the iron from the carbon at home, and do it as soon as possible. About all the ways and means that can solve this problem, we'll tell in this article.

to the contents ↑

What is carbon deposits and what is it dangerous for?

Nagar occurs when the fibers of various fabrics are melted, as well as when garbage is heated on clothes or decor elements. As a result of heating, small particles acquire a soft and fluid form, due to which they stick to the sole of your household appliances. All this mass freezes on the iron when it cools and grasps a thin layer of strong burning.

If you do not immediately remove it, then with the next ironing any bright thing will cover with dark spots, as the deposit melts again and you literally wipe it about your luxurious light blouse or pants. And to remove them is already very difficult.

Even if ironing black things or any dark shade, the effect will be unambiguously unpleasant for you - glossy scorches on fabrics that are also hard to remove.

The conclusion from all this can be done one: it is necessary immediately after incorrect use of the household appliance to choose a suitable tool and to clean the iron from the carbon at home.

to the contents ↑

How can I prevent the carbon deposit from appearing on the iron?

In order not to waste your valuable time to permanently clean the soleplate of the iron, it is enough to follow all the rules and recommendations for choosing the right temperature regime in the process of straightening things out after washing. If you do not know about them or have partially forgotten, take note of these basics of correct ironing once again:

• silk, organza and other delicate fabrics are dressed at minimum temperature;
• wool requires not only the effects of low temperature, but also the use of lining fabrics;
• synthetics should not be subjected to such treatment at all, as a last resort - it is permissible to iron it only at minimum temperature, necessarily through gauze or lining fabric;
• cotton, linen and other natural thick fabrics can be ironed at a higher temperature - from 150 C.

But the cases are different, so you can never forget the problem of carbon deposits. From time to time, you most likely still spoil one of your favorite things with the wrong temperature and provoke the appearance of burning on the sole of the iron. Therefore, it is necessary to know from the most pedantic people how and how to clean the iron at home from carbon deposits.

to the contents ↑

Than you can not remove the fumes from the sole of the iron?

Do not attempt to scrape off any stains with sharp objects such as knives, blades, etc., especially if you have a modern ceramic or Teflon-coated device. By such actions, you irrevocably ruin not only a thing for ironing, but the iron itself - there will be scratches growing into cracks, which will entail the need to purchase new household appliances.

Do not use abrasive agents such as coarse abrasive or similar tools for cleaning.

Important! If, before reading this article, you have already tried such a tool, polish the surface of the sole. To do this:

• Wipe the paraffin wax or candle wax on a fine grater.
• Mix the resulting mass with a fine-grained salt.
• Put the whole mixture on a clean sheet of paper and iron over it several times.

to the contents ↑

How can I clean the carbon from the iron?

The situation of the soiled soles so necessary in the life of the appliance is, of course, unpleasant, but not critical. There is a lot of means and ways, than to clean the iron from the carbon in the home. We offer you the simplest and most effective solutions.

Method 1

Take special pencil for cleaning iron, spread them heated surface and iron it on the net, you do not need material until clean.

Important! A pencil is always better to have at hand, because you never know when you will urgently need to iron a dirty iron. You can buy it at any household chemistry store or universal market. Its application is extremely simple, besides, it is suitable for irons with a sole made of any material.

Method 2

soda and vinegar - is the most versatile cleaners that in this situation will help you to safely restore the purity of the surface of the soleplate. They are used in this way:

1. As usual prepare for the ironing process - put the ironing board, put on top of it unnecessary material( clean, light shade).
2. Put a handful of soda and sprinkle it with vinegar - a foam reaction should go. You need it.
3. Set the average heating mode and iron the soda-vinegar mixture until the sole is completely cleaned.

Important! With a little contamination, you can not heat the device, but do such a procedure with a cold sole. For delicate coatings such as Teflon, this method is best not to be used, since abrasive soda can leave scratches on the surface. In the future - they will pull the fabric of things from lightweight fabrics, leave clings and dirt.

Method 3 To clean the iron from scale at home, you can simply wipe the soles dipped in vinegar clean unnecessary cloth. In case of severe contamination, the iron can be slightly heated, but to such a temperature, so as not to burn your fingers.

As you can see, nothing is difficult to clean the iron from the carbon, no. But do not now every time at random to expose the temperature of the iron and spoil your favorite things. Yes, and with a constant cleaning of the sole, the iron will serve you less. Therefore, be careful while ironing clothes and choose for this really convenient time for you, so you do not have to rush and spread your attention to the simultaneous solution of several problems.