Drain hose for washing machine

The presence of a washing machine is no surprise. Therefore, everyone should know how to solve certain problems arising from this technique. One such is a drain hose for a washing machine. In this article, let's talk in detail how to solve the problem. Exit only 2:

1. Acquisition of a new hose of the required length.
2. Extend the existing tube.

We will discuss these processes further in the text.

to the contents ↑

Geometric features of the

In order to replace or extend the drain pipe, you need to understand the features of its geometric device. As a rule, the installation of the bundled tube has already been carried out by the manufacturer. This ensures absolute protection against leaks and other malfunctions of this part.

The washing machines are designed so that the water pressure does not exceed a certain pressure, while draining the water from the pipe can be stopped with a finger:

• Given this factor, the upper point of the hose should not be above 100 cm. Otherwise, the pump simply can notpush the water out.

Important! The upper point is considered to be the height of the pump attachment. However, it is enough to place any point of the hose at this height.

• On the other hand, the same point should be at least 60 cm relative to the lower point of the device. The minimum height is always indicated in the installation and operating instructions. This recommendation is needed to ensure that the water does not immediately flow into the sewer when it enters the drum.

Important! For the organization of draining into the sewerage of the kitchen sink, it is recommended to use a height of 90 cm. This avoids periodic blockages.

to the contents ↑

Extension process of the drain hose

Before you extend the washing machine drain hose, you will need to purchase:

1. A drain pipe of the required length, the same brand as in the kit.
2. Connector for hoses.
3. Clamps for clamping.

The very process of extension is conventionally divided into 3 stages:

1. Purchase the necessary material suitable for your model of the washing machine. If you can not find an identical tube, you need to find the most similar in characteristics, the most important of which is the diameter.
2. Preparing to install an extension cord. The connection of the connector into the drain hose must be very tight. The connection points must be in the middle of the tube.
3. Securing the terminals with clamps. The tightening torque should be strong enough to prevent tears and subsequent leakage.

Important: Before you start the machine, double-check all the fasteners for reliability. The most appropriate is the gluing of the tubes together - this provides the most reliable sealing.

to content ↑

Types of hoses

Regardless of the fact that the function of the drain hose of the washing machine is always the same - drainage of dirty water, the market provides several of its varieties:

1. The usual hose of fixed length - varies from 1 to 5 meters. If necessary - it can be lengthened.
2. Telescopic type - quite a versatile option. Such parts are sold in a compressed form, and when stretching they increase their length up to 3 times. They have their own shortcomings. Hoses of this type are most prone to damage and blockages.
3. Hose in the bay. It is a long tube with a module of 50-55 cm. It is convenient because it can be cut off on the notch made modulo. So - you can make the necessary length yourself.

Important! It is not recommended to use a length exceeding 3 meters, as the longer the length, the greater the chance of clogging or damage. And such things lead to breakdowns not only of the drain system, but of the machine as a whole.

Among the general characteristics for each type, you can distinguish such:

1. The material of manufacture is polypropylene.
2. At the ends there are, so-called, fittings in diameter from 19 to 22 mm, made of rubber.

to the contents ↑

Ways to organize the discharge

Water can be drained in several ways. From this in many ways depends on the well thought-out design of the drain system. We will analyze the most popular variants:

1. Drain in a sink or a bathroom. For this method, it is enough to stick the hose to drain the water into the holder and send it to the bathroom or sink. This method is used when it is not possible to connect to the sewage system or the temporary use of the machine in this place.

Important! This option has its disadvantages: the inability to use the bathroom / sink when washing, contamination due to waste water, an unpleasant appearance of the device.

1. Connection to the sewer with a siphon. The best option for many cases. Sufficient sealing is ensured with ease of use.

Important! The disadvantage of such a system is that it occupies a certain place.

1. Installation directly into the sewage system through the cuff. In this way, it is necessary to make sure that there is a stock of the length of the drain hose of the washing machine. Do not stretch the hose, since vibrations can damage the joint, which will lead to leakage.
2. Siphon with check valve. This method of connection is rarely used in our time, since most apartments do not provide a special place for devices such as washing or dishwasher.

Important! The mechanism of this type significantly benefits from the previous ones, since it has a system for protecting against unpleasant odors and for the return of water to the equipment.

to the contents ↑

General recommendations for the replacement or extension of the

Each washing machine is individual, respectively - the instructions for replacing the hose are different everywhere. But there are a number of general rules for each of them:

1. It is first necessary to turn off the machine from the mains. At the same time, the power wire is fixed to the back of the device.
2. The next step is to disconnect from the water supply. In this case, it is necessary to pay attention to the pipe laying. You can not let her get lost.
3. At the place of fixing the drain, you need to put a plug, and the drain hose for the washing machine is fixed to the rear wall with a branch pipe upward.
4. The next step is to gain access to the hose securing point - usually the connection to the drain pump of the device.
5. The tube is then disconnected and removed. Also it is necessary to disconnect it from the sewage system and gently drain the remaining water.
6. The last item is replacing the old hose with a longer one.

Important! How to get to the washing machine drainage system - is carefully described in the operating instructions from each manufacturer. There is also an instruction for installing a new pipe.

The installation of a hose for draining water is quite simple if you understand some of the subtleties described above. And this means that you probably will not need the help of a specialist, and you will successfully mount everything yourself. Remember, compliance with instructions is the key to success.