A sofa with his hands: the choice of models and tools in 75 photos

Beautiful sofa is the main element of the design of any room. This is not just part of the furniture, but also a business card of the whole house, to which attention is usually focused on the guests who came. In specialty stores such furniture, as a rule, is quite expensive. If we make a sofa with his hands, it will cost much cheaper. manufacture it is not difficult at home.

Self-production of furniture

Using a simple design make a quality product under the force of even a person who had never worked in the production of upholstered furniture. If in a modern apartment a sofa would not look very respectable, in a country house or dacha, he remarkably fit into the local interior.

The main components of the product are:

• frame;
• back;
• side portions;
• fabric grill.

The frame can have any shape and size. For its production uses wooden slats and boards. To give greater rigidity to the structure, applied veneers or particleboard. Assembling is carried out using a power screwdriver. All joints are lubricated with joiner's glue at first, then the wooden parts are tightened screws. Furthermore, it is desirable to secure the joints by metal corner fasteners.

Frame for the mattress is made of boards. To make the product more comfort, a support frame area can be made of woven furniture straps. First straps are attached to the frame vertically, then perpendicularly to the horizontal is binding. Despite the fact that this is not a couch using traditional steel spiral, it will be great bounce. Therefore, lie on it will always be a pleasure.

The back is usually made hollow inside. Shape it is possible to give a rectangular or sloping. To this end the width of the base increases and decreases above. The side parts are made in the same way as the rest. The top and front side of the back pasted foam mats. On the inside of the side parts of the foam is glued too. Glue should be applied evenly with a wide brush. Before complete curing adhesive foam sheets have to be tightly pressed to the pasted surface.

The fabric lining is performed on harvested patterns or pattern. If they have available, they are easy to do yourself. To do this, the fabric is tried for each element of the sofa, and then make the necessary lengths of cloth. After stitched mother of all component parts, final assembly. The simple design of such furniture is usually done in three days.

For the manufacture of a rounded couch is most often used for furniture boards. They are made of wood or thick plywood. Such material enables the construction of round cope with the required load. To fix the upholstery in the size of individual parts must be present a certain margin. The lower soft parts under the skin, it is desirable to make multi-layered. Because of this sitting will be much softer and more comfortable.

How is a fold-out book

Root production sofa books by creating a separate frame members of the assembly. This includes sidewalls, back, seat, clothes drawer. First the linen compartment of boards. This frame at the corners reinforced with short pieces of boards, and the bottom is supplemented rails. For the back and seat boards are also used, which are connected with screws or special nails with a notch.

In the manufacture of sofas using this tool:

• Hacksaw on a tree;
• screwdriver;
• plane;
• hammer;
• scissors.

To these frames bolted wooden slats. They have to play the role of a support for the mattress. After all the frames are ready, built. However, special arrangements are needed. You can buy them in the construction market or in a store. During installation mechanisms between foldable parts need to leave a gap of about one centimeter.

In this case, the sofa should be expanded. Due to the gap, he will be free to fold and unfold. Before laying the foam from the top slat first need to paste interlining. This will enable the plots foam sheets between the slats not fall. The surface will always remain smooth. That the sheets do not interfere with the folding mechanisms are near these parts are cut corners.

At the edge of the seat is usually made soft cushion. To do this, on top of the solid layer is glued additional foam rubber strip. The lower edge of the strip is folded under the seat and is also glued. Similarly soften and armrests. Such a procedure is performed, and the backrest. When a foam glue is completely dry, dress sewn on the size of furniture covers.

Production corner sofa

First the lower part, that is the seat. Joined planks held together with screws and the corner plate. To the bottom duct screwed particleboard sheets. For support is a separate frame. Support portion is also closed with plywood. The back can be stretched dense matter. Product dimensions are linked to the parameters and the shape of the mattress.

Additional manufacturing steps similar structure. To connect the parts, is the angular design. Usually it is made of the same material as the main elements. During manufacture of this design must take into account the rotation angle. The back and the base of the pasted batting. The rear side cover of dense cotton cloth.

The legs are usually made of square pieces of timber. For attachment to the lower frame in the bars drilled holes. Then they are applied to the bottom of the frame and bolted long screws. In the manufacture of such furniture should pay particular attention to the design of the structure. If it is not done correctly, can later appear different deflections, deformations, and other similar defects occur.

such materials are used for the manufacture of furniture:

• board;
• timber;
• foam;
• particleboard;
• furniture fabric;
• joiner's glue.

If the furniture showroom you decide to buy some unusual bed, it may be you can not afford. Original products are very expensive. It will be much better make a custom sofa bed with his hands. There are needed beams, boards and plywood sheets of appropriate thickness. The backrest is assembled from planks and lumber pieces. The front of the assembled frame is best to sheathe sheets of chipboard.

They are strong enough, and in the shops of building materials are cheap. Harvested basis should be treated with stain or varnish. Due to this it will last much longer. For the soft parts of the product used, foam sheets. Fabric materials are attached to the frame with special nails with wide hats.

unusual sofas

Often their masters from improvised material. Especially if the product is intended to testify. The seat and back of the furniture can be made from second-hand door wings. Details purified from the old coating and dirt, and then treated with a grinder. Then they need to be painted or pasted veneer. One door leaf mounted on wooden poles. The second leaf is used as a backrest. To attach the base should be at a comfortable viewing angle for you.

The mattress is cut out of foam. The piece of material must meet the size of the seat. The resulting preform is initially fitted by a thick cloth, and then puts on top of beautiful cloth having good quality. In the manufacture of such furniture should pay particular attention to the reliability of frame base. It should easily withstand the load that occurs from sitting on the couch a few people.

Beautiful and comfortable furniture for relaxing can be done with drawers, which is convenient to store bedding and clothing. Due to the high functionality of the structure, in the bedroom will be no need to install additional chest or clothing rack. This will keep the living space, make the room more spacious.

The product contains the following components:

• back;
• seat;
• a pair of armrests;
• drawers.

Each part of the product gets off separately. The back is gathered from long boards. To ensure the necessary rigidity straps reinforced with short transverse bars. To get a chamfered back, the rear strap should be longer and shorter front. Top frame set obtained chipboard sheets, which are then glued over with a cloth, foam and sheathed.

Seat mounted a similar framework. Its only difference is that it does not have the tapered portion. On each side are attached to the armrests. They should fasten with long screws in a few places. Drawers made frameless. The material used here also chipboards. To put forward both drawers easily, special mechanisms are mounted on the frame uprights.

Once all the details are covered with foam, on top of it is placed sintepon. Next to protect the soft material, the whole sofa is sheathed sturdy cloth. The quality of the final skin affects the appearance of the furniture. If you wish to make your product look fashionable and respectable, you can use a good skin or leather. Now construction markets such material presents a large number.

The use of scrap materials

From simple items you can make furniture, which is easy to fit into any interior. If the structure is made of wood, the product will be regularly serve more than one year. Worn blankets or cloth trim is easy to replace if necessary. Today popular are those pieces of furniture that have an unusual design and style. Producing goods from the materials at hand, it is possible to give the most unexpected exclusive look.

Independent production of domestic goods makes it possible to create an original design, fits perfectly into the interior of the particular room. If you own the merchandise is received fashionable, reliable and beautiful, they can be proud to show off to your friends. Create your furniture sets of forces to everyone who knows anything knows how to use carpentry tools and have patience. To create an original masterpiece of furniture, just turn on the imagination, to show a little perseverance and hard work.

The cozy home is always beautiful furniture. Dominant position, as a rule, take a luxury sofa. Family members spend a lot of time on it. Here, play with children, sleeping, organize gatherings with close friends. Before producing his own couch, you need to understand well what its type will best meet the needs of all family members.

The most popular products are:

• angle;
• book;
• dolphin;
• with the folding mechanisms.

This also can be attributed to the couch. This product is extremely simple. In it, there are no folding mechanisms. Therefore, to make the couch with his hands did not pose any difficulty. Choose a future bed is desirable in view of the place where it is installed. Before you begin, you should make the necessary measurements, make preliminary drawings.

Rules joinery

Corner bed looks more prestigious than a conventional folding option. If you are doing this work for the first time, it is better to do a very simple hack, not having any additional shelves and drawers. When the frame assembly do not try finger joints at the ends of the boards. This work is carried out only by professional carpenters. Some elements bind nails are not desirable. Since the assembly is constantly loosen over time weaken the nails begin to mount. Better use of self-tapping screws or screws.

Natural wood should give preference to conifers. Their fibrous structure is saturated with resin, which protects the wood from rotting processes. Thanks to this pine products have a fairly long life. Before assembling prefabricated elements must be thoroughly sanded. This will provide the necessary security for future work. The cut material is desirably carried out on the street, because this large amount of wood dust.

The frame is the basic part. To it are attached all the other details. When assembling the seats you need to check the box on the match diagonal sizes. The correct form of the box only provides resistance carcass. Before sticker soft skin, check all connections. If a joint is unsteady, it should be strengthened by additional screws or metal corners.

Then take measurements on all surfaces. The obtained size of the foam are cut out individual elements which are then adhered. All the soft parts must be joined with each other tightly. Seat foam should be much thicker than the back. If a thick layer you do not, you can glue several separate layers of thin material. From the quality of this element will depend on the comfort and convenience of sitting on the couch.

VIDEO: furniture with his own hands. Production of the couch. Part 1 frame.

50 photo ideas how to make a sofa with his hands