I do not think that to make the sofa in the kitchen - a complicated process. If we consider all the rules, follow the guidelines, you can make a coherent, robust construction. A piece of furniture finishing stage is the final fireworks.
In this article, we try to figure out how to make a sofa with his hands.
Sofa - a necessary thing in life. There are many variations of the piece of furniture. Due to the fact that it allows long lasting, reusable operation, amortization threshold increases sharply.
For this reason, sofas are in great demand.
The main positive side of the sofa assembly their own hands - it is an opportunity not to pay the store for the thing, which is much cheaper, "design".
So, buying the necessary materials, and preparing construction utensils can make a corner sofa in a home studio for a few hours.
Factories made uniform model. If the furniture is tinkering their own handsIt can be made of such a type and design that you currently outlined in fantasy. This is another plus to create a design. A variety of construction Supermarkets determine availability of any of the materials.
Because of this, expanded range of lumber, fasteners, trim elements for the future of the product.
Content
- 1 We determine the design and construction
- 2 Necessary materials
- 3 Required tools
- 4 Preparation of the frame, the back of the timber and plywood
- 5 Assembling the sofa to the kitchen
- 6 Interior kitchen sofa
- 7 The last stage - decoration
- 8 VIDEO: How to make a corner sofa to the kitchen with his hands.
- 9 Sofas in the interior of the kitchen - 50 photo-ideas:
We determine the design and construction
The most popular option is a practical kitchen corner sofa. This design can be used, disassembled into individual sectors or put whole and perimeter wall.
In addition, models are appropriate in the interior of the kitchen, practical in everyday life.
Thus, the wooden panels covering lacquer couch can warn him from the influence of humidity, moisture, excessive dryness of the air. Corner unit consisting of two benches with a rounded middle, takes little space in the kitchen, which is very convenient.
Aesthetically attractive glossy coating facilitates easier removal of oily stains from the surface.
Corner sofa is of two types: fixed, sliding. First - easier to install, so it is perfectly "will stuff his hand," the novice master. Sliding construction - troublesome in the performance, but looks quite presentable. Observing schemes and recommendations, and to do that, and another kind of really the first time their own hands.
Since most of the dining tables made of wood, base, corner handrails need to be made of the same material.
Developing the kitchen sofa of your dreams, you need to decide on the upholstery. It is this detail will create original, interesting piece of furniture. The choice of liner material may well be on the microfiber or imitation leather. To maximize the sofa seats were soft, it is important to correctly choose the filler. There are the normal materials, increased rigidity, soft, hard, elastic. All kinds of give additional comfort, softness.
The filler is to choose, starting from their preferences.
Necessary materials
The choice of materials production - a crucial step, because of their quality durability depends on reliability. Buying a timber, you need to take a bit more of. This causes the presence of defective elements.
For the kitchen facilities need:
- The bars 15 * 15 mm - 1.2 m;
- Bars with a cross section 40 * 40 mm - 0.135 m;
- The bars 25 * 25 mm - 3.6 m;
- The bars 30 * 30 mm - 1.2 m;
- Wall section 20 * 350 - 1 m;
- Rake 20 * 60 mm - 2.1 m;
- Plywood 1.2 * 45 * 255 cm;
- foam;
- Plugs for fixing;
- Piano hinges;
- Angles;
- Euro screws;
- Wood glue.
- Chipboard.
Materials for making the corner of the sofa.
Various types of fasteners.
Before the start of major works it is important to determine the dimensions of the sofa. Masters do not recommend doing it in the standard parameters, as the slightest deviation from the norm could spoil the design.
Dimensional plan kitchen couch:
- Main sofa:. Length of 1.2 m, height 0.85 m, a height of rest.; 0.3 m.
- Side divanchik- 0.45 * 0.45 m .;
- The width of the side panels - 0.45 m .;
- Seat height - 0.4 m.
These figures are tentative, but masters are advised not to go to the settings, or increase the risk of manufacturing defects.
Required tools
In conditions that kitchen will be made their own handsIn carpentry is necessary to take a set of tools:
- Sawing wood;
- Drill;
- Electric jig;
- screwdriver;
- Electronic Planer;
- Building level;
- Tape;
- sandpaper;
- Scissors;
- Stapler with staples.
- Knife for foam.
This is the main list. Always prepare for work safety goggles, gloves and a pencil for marking, line.
Preparation of the frame, the back of the timber and plywood
A sofa in the kitchen with his hands start with a rack mounting. The process includes the following steps.
-
Of plywood producing "patterns" laterally with undulating edges for beauty.
By the size of the individual parts cut out.
- With the planer, and elevated edge parts for perfect flatness. Some experts apply a decorative tape for sections.
-
Master base frame from two frames, connected by short bars Euro bolts.
Joining them will be here with the help of such bridges from a bar.
- Frame front, rear sheathed with plywood, sawn in size.
-
The same principle must perform a side sofa.
Two straight pieces are ready. Proceed to a compound of the corner portion.
- Between the two modules to do "support", a curved inward at 90 degrees. The material of manufacture is plywood, it's flexible, docile.
- After bending the plywood piece is attached to the frame joists 40 * 40 mm, sheathe from all sides.
-
Upon completion of works should reach three sofas module: nodular, side stalls, semicircular middle.
Appearance corner sofas, manufactured their own hands, gradually emerges.
As a result, simple joinery action will Triplex furniture unit.
Assembling the sofa to the kitchen
The construction design of the housing - 50% of sales ideas. For the formation of the sofa seat to be produced. Requires make "skeleton" of the bar 25 * 25 mm. Sew them plywood sheets 25 mm in thickness. Sandpaper rubbing irregularities joints. A prerequisite is the treatment of wood elements antiseptic solution, a layer of stain, lacquer.
On the front side of the cover is fastened by a stapler or a foam adhesive is lowered.
Along each should be strengthened piano hinges. After they will bind the main unit with the seat. Before upholstery all open space modules sutured plywood seat attached to the frame. The tree is covered with lacquer color scheme.
Interior kitchen sofa
Sofa kitchen with his hands almost ready. The next stage - the padding. As a material selected sintepon or foam. Each element of sofa measured.
Specify cut upholstery, is attached directly to the adhesive to furniture parts.
Similarly, we do the backrest upholstery.
Followed obtyanut lining cloth. In this regard, the most used fabrics: jacquard, velor, microfiber, the flock. To perform the processing details of the selected material cut-to-size elements of the sofa with allowances.
The material should be attached to the back and joints of modules with seats.
The final stage of the manufacture of corner sofa with his hands - the assembly of all the parts into a whole.
The last stage - decoration
To corner sofa now has a unique and distinctive feature, it is subjected to further transformation.
-
The most effective way - to use covers zavyazochkah or colorful cushions.
Since the sofa is in the kitchen, you can choose your pillow from a water repellent fabric on PVC type.
-
An interesting solution is the decoration of the individual elements of the sofa in the color of curtains with prints.
On the sofa cushions can be placed from the material, is congruent with the design of kitchen curtains.
-
In winter, to give the kitchen areas of comfort, on the sofa, you can casually throw a soft, terry blanket and pillows.
Bright cushions bring mood to the design of the room.
Decorating the sofa - the most interesting part, because it is possible to perform, rested from the main job.
Sofas by their presence can change the atmosphere, making it a warm and harmonious.
VIDEO: How to make a corner sofa to the kitchen with his hands.
Sofas in the interior of the kitchen - 50 photo-ideas:
