Cleaning the iron with ceramic coating

click fraud protection
Contents:
  • How to clean the iron?
  • How to clean the sole of the iron from the deposit?
  • Cleaning the ceramic iron
  • How else can I clean the iron?
  • How to clean the iron from burnt synthetics?
  • Useful advices:

Any, even the most modern iron needs maintenance. Cleaning the iron with a ceramic coating should be done regularly. Rust, plaque and carbon deposits reduce the speed of sliding the apparatus along the fabric and can ruin your thing. Not to mention the spots that can remain on things after such ironing. Methods and means for cleaning this household appliance are many and in this article you will learn about them.

to the contents ↑

How to clean the iron?

Regardless of which cleaning or cleaning task you are going to solve, you will first have to decide on the appropriate tool. Cleaning the iron with a ceramic coating is no exception. All options can be conditionally divided into two types:

  • household chemicals;
  • natural home remedies.

Depending on the quality of the coating and the nature of the contamination, you will find it useful:

  • ammonia;
  • salt;
  • hydrogen peroxide or hydroperite;
  • sulfur;
  • cleaning agent for glass ceramics;
  • iron cleaning pencil;
  • toothpaste;
  • vinegar;
  • toilet soap;
  • nail polish remover.

Do not forget to see if you have any tools for high-quality cleaning - these are:

  • rag;
  • kitchen sponges;
  • cotton wool and sticks.
to the contents ↑

How to clean the sole of the iron from the deposit?

Nowadays, the most popular household items have either ceramic or Teflon coating. But even the most functional device is not immune from the fact that you have to think about how to clean the burnt iron.

Cleaning the Teflon-coated iron

The machine with this coating rarely burns and does not get dirty, but if the stains appeared you can clean it in several ways:

  • Method 1. You will need a special pencil. It is used as follows:
    1. Preheat the iron and disconnect it from the mains.
    2. Take a pencil and carefully rub it all with soiled areas.
    3. Wait for the appliance to cool.
    4. Remove any remaining dirt with a damp cloth.
  • Method 2. Good oxidizes and removes any dirt on the Teflon sole vinegar. Instructions for use are:
    1. Moisten the cotton pad with vinegar.
    2. Treat all contaminated sites.
    3. Wadded sticks wipe all the holes on Teflon.
    4. Turn on the appliance and iron the cotton cloth.

Cleaning the ceramic iron

The ceramic-coated iron is very practical to use, it rarely spoils the fabric and it is easy to clean. There are several methods to remove from it pollution of different origin:

  • Method 1. The simplest, but not the least expensive, option to clean the ceramic-coated iron is the use of a glass ceramic agent. If you have a kitchen surface made of this material, you are well suited to the remedy that you regularly use to maintain the cleanliness of the hob. It is used in this situation as follows:
    1. Apply the product to the cold sole of the device.
    2. Wipe with a sponge.
    3. Remove the cleaner with a clean, soft cloth.
  • Method 2. The ammonia and its mixture with vinegar can easily cope with the deposit and the scale on such a device. Step-by-step instructions are as follows:
    1. Apply ammonia on the cold sole of the iron to be turned off.
    2. Use a sponge to treat the entire surface with the product.
    3. Dampen soft cotton material with ammonia.
    4. Turn on the iron.
    5. Smooth out the material.
  • Method 3. Hydrogen peroxide copes well with the burnt out sole of the iron. It is used so:
    1. Pour a lot of cotton swab with peroxide.
    2. Wash the dirt and the entire work surface.
    3. The appliance must be switched off, but the surface is warm.
to the table of contents ↑

Cleaning the ceramic iron

If you did not correct all the negative effects of ironing in time - hurried, then forgotten, and now it seems to you that it is impossible to eliminate the trouble, calm down! Even the oldest stains can be removed if properly operated. This cleaning of the ceramic-coated iron will most likely take a little longer, but you do not have to spend money and purchase a new device.

Variant 1

Traces of strong carbon deposits will help remove salt. She cleaned the surface even in the absence of stores of household chemicals. It is good that it is always available in any home. In this case, you will have to do such manipulations:

  1. Place a small salt on a piece of paper.
  2. Turn on the appliance and smoothly smooth the sheet with salt.

Important! Do not use large salt - it can scratch the coating. This method is absolutely not suitable for Teflon coating .

Option 2

Hydropyte tablets will clean the carbon deposits of any complexity. Follow these step-by-step instructions:

  1. Heat and switch off the appliance.
  2. With a tablet, grind all the deposits stained with carbon.
  3. Remove any debris and tablets with a damp cloth.

Important! Carry out this procedure in a well-ventilated area and in gloves!

to the contents ↑

How else can I clean the iron?

You have already got acquainted with the popular and effective ways of cleaning irons with Teflon and ceramic coating. If you like to experiment, try using other, not very common, but safe and effective methods.

Method 1

Sulfur is able to exfoliate any dirt. Its use is not traditional, but effective. It is used as follows:

  1. Preheat the device well.
  2. Take the matchbox.
  3. Rub sulphate deposits with a side "sulfuric" side.
  4. After removing all contaminants, treat the sole with a damp cloth.

Method 2

Another unusual option - with the use of toothpaste. Such a tool will help to solve the problem if you use it like this:

  1. Use an old toothbrush to apply a remedy to the burnt surface.
  2. Slightly rub.
  3. Remove any loose dirt and residue from the paste with a soft cloth.
to the contents ↑

How to clean the iron from burnt synthetics?

Very often we forget that you can not iron synthetic fabrics without previously protecting the work surface and the thing itself with gauze for ironing. The artificial fabric quickly melts, and sticks to the unprotected sole. To remove the work surface from pieces of cloth, use any of these cleaning methods.

Method 1

Clean the iron from pieces of polyethylene and synthetics will help the nail polish remover. Step-by-step instruction:

  1. Dampen the cotton swab with liquid.
  2. Treat the surface of the switched off warm device.
  3. At the end of cleaning, wipe with a damp cloth.

Method 2

If synthetics are burned before your eyes, immediately use soap to quickly remove traces of trouble:

  1. Preheat the appliance if it has cooled down.
  2. Scrub the sole with soap.
  3. Allow to cool.
  4. Rinse the soap with dirt.
to the contents ↑

Useful advices:

  1. Do not attempt to cope with the problem of contamination of the working surface of any iron with knives, metal brushes and other abrasive agents that can lead to complete deterioration of the coating.
  2. To avoid frequent contamination, wipe the appliance with a damp cloth after every ironing.
  3. All synthetic things are ironed only through gauze.
  4. All silk and woolen fabrics should only be processed in a suitable temperature mode.
  5. Try to iron things from the wrong side.

We hope that our article was useful to you and if there was such a trouble as a forgotten iron in the outlet or an incorrectly selected temperature regime, cleaning the iron with ceramic or Teflon coating did not take much time from you.