How to clean the iron from burnt tissue at home?

How to clean the iron from burnt tissue at home?- The trouble that leads to such a problem, most likely happened with almost every mistress in the process of ironing clothes. It is wrong to set the temperature of the appliance, and your favorite blouse is damaged irrevocably, and on the sole of the iron a dark raid was formed. The answer to the question, than to clean the iron from adhering fabric, you will find in our article. Using useful tips, you do not have to change the technique very often.

to the contents ↑

Kinds of iron coatings

Before cleaning the iron from burnt cloth at home, it is necessary to find out what material the sole of the affected device is made of. Modern manufacturers produce irons with Teflon and ceramic coating, with soles of stainless steel or aluminum. Because of such a variety of coatings, some of them require a more delicate cleaning.

Aluminum outsole

Irons with this sole are the most difficult in the process of removing burnt traces. Such a surface is prone to the appearance of small scratches. From this fabric often spoil and stick to the coating.

stainless steel sole This material is quite unpretentious - in the absence of other suitable means, it can be cleaned even with a sharp object, such as a blade or knife. But it is better to choose other methods to clean the iron from burnt tissue at home so that you do not have to polish and restore the surface regularly.

Ceramic outsole

Very common base in appliances. Clean the surface carefully, using tools that do not include abrasive substances. During cleaning, the use of brushes and hard jaws should be avoided.

Teflon outsole

This coating is a stable and durable surface. But the process of cleaning it takes a lot of time and effort. For such a surface it is better to use special pencils for irons.

to the contents ↑

How do I clean the iron at home from adhering fabric?

In the case of sticking the fabric on the sole of the iron during ironing, you can clean it in several ways. Let's consider the main ones.

Cleaning pencil

With a question how to clean burnt iron, many turn to the store of household goods. And not in vain. On its shelves, you can find a special tool that is made specifically for cleaning the appliance from burnt matter.

The cost of a cleaning pencil is minimal, but it removes dirt very easily from your side. Another advantage of this product is that it can be used on absolutely any covering of the soleplate of the iron. Of course, if the manufacturer did not specify otherwise in the instruction.

Important! Before using, be sure to read the instructions of the product.

How to use:

1. Preheat the appliance to the temperature specified in the instructions.
2. Remove the packaging from the pencil and lightly rub the dirty surface.
3. When applied to a heated surface, the pencil melts and flows along with the burnt particles.
4. Remove excess dirt with a dry, clean cloth.

Important! When applying a cleaning pencil, observe the safety rules. When a pencil comes in contact with a hot surface, an acid is released that has a sharp odor. After use, always ventilate the room. If the molten product hits the skin, burns may occur.

Sodium salt

Want to know how to clean burnt iron at home? The next effective detergent for removing iron from the coating of the iron is always on the kitchen shelf in each house. With the help of salt, you can remove dirt very quickly from the appliance and continue to iron the clothes.

Important! To clean the device with Teflon coating, you should look for another method, because such a coating can not be cleaned with abrasive substances.

How to use:

1. Prepare a thick sheet of paper.
2. Pour half a cup of table salt over it.
3. Preheat the appliance to the maximum temperature.
4. Iron with poured salt and do this until the contamination disappears.

Important! You can try to wrap the salt in a handkerchief and wipe the dirt with a bag.

Paraffin candle

A candle made of paraffin will help to solve an unpleasant situation when the iron is burnt. How to clean the surface of the device with it, is described in detail below.

This method is very popular among experienced housewives. A paraffin candle cleans the coating of burnt cloth as well as a special cleaning pencil. If you often turn off the electricity, the candles are sure to be in the house. If they do not exist, then it will be necessary to spend a little on their purchase in a hardware store. With the use of candles, it is easy to clean up recent pollution of any origin.

How to use:

1. In a clean cotton cloth wrap the candle. This way you will get a pencil from the deposit.
2. Heat the iron to maximum temperature and lightly pencil over the iron cover.
3. Place a clean cloth under the surface of the appliance.
4. When the pencil melts, draining over the soleplate, the dirt will disappear at one point.

Important! During cleaning, keep the iron tilted so that the paraffin flows down.

1. Finally, clean the cleaned soles of the iron with a damp, wet cloth.

Important! Do not apply special efforts when working with rags, so as not to scratch the coating.

1. If your iron has a "steam" function, clean the holes on the bottom of the machine.
2. Pour water into a special compartment and pass steam several times. This eliminates the wax residue from the iron and avoids stains on the clothes during the next ironing.

Table vinegar

For sure in every kitchen there is a table vinegar. This liquid will help to solve the problem: how to clean the iron from burnt synthetics. Vinegar perfectly wipes the soft, fresh spots on the ceramic, teflon and metal surface of the electric iron.

Important! When processing, make sure that the liquid does not get on the body.

There are many recipes for preparing a mixture for cleaning. We offer the fastest cooking options.

Important! If for some reason you do not have vinegar, you can use citric acid in a similar way.

Method # 1:

1. Wait until the surface of the device becomes warm.
2. Prepare the solution by adding 1-2 tablespoons of vinegar to one glass of water.
3. With a soft, clean cloth, soak in solution and wipe the iron.
4. Fresh, just appeared, marks are cleared in an instant.

Method number 2:

1. Richly soak the rag with vinegar.
2. Place a warm iron on it and leave it in this position for the night. Vinegar will soften and contribute to the flaking of burnt tissue.
3. Remove dirt residues in the morning with a dry, dense cloth.
4. In this way, persistent old stains can easily be removed from the surface of the appliance.

Toothpaste

Exhausted by the question, than to wipe the iron from the adhered fabric on the steel sole? In this case, use toothpaste. To the process of removing burnt tracks it is worthwhile to proceed immediately, otherwise cleaning will require much more time and effort.

How to use:

1. Cut a debris residue with a sharp object.
2. Wait for the appliance to cool completely.
3. Apply a toothpaste to the contaminated area.
4. Use the hard side of the dishwashing sponge to wipe off any remaining carbon residue.

Hydrogen peroxide or ammonia

Do not know how to clean the iron from burnt cloth? In the chemist's locker, look for peroxide or ammonia. These medical fluids will very effectively clean the surface of the electric iron from adherent tissue.

Important! The principle of cleaning the soles from pollution by peroxide or ammonia is the same, so the recipe for the preparation of the solution is suitable for both one and the other component.

Cleaning method:

1. Wait for the appliance to cool completely.
2. Apply the selected liquid to a clean rag.

Important! The vapors that secrete ammonia are harmful to health. Therefore, conduct the treatment in a well-ventilated area.

1. Clean the damaged parts of the device.

Soda

Sodu can be considered the most popular product in home life. It must be stored in the locker of every mistress. Soda can not only perfectly clean kitchen utensils or eliminate stains on the carpet and linoleum. It is the basis of one more correct way, as in the home conditions, to clean the burnt iron.

Soda will help get rid of old burnt spots.

Important! It is not recommended to use soda powder on surfaces that react negatively to the action of abrasives. It is best to use it on metal surfaces.

How to use:

1. Add soda in warm water and mix thoroughly.
2. Bring the solution to the state of the gruel.
3. Apply the mixture to a dirty surface.
4. Wipe the stains with light wipes with a dry rag.
5. Finally, remove the remnants of the product with a damp cloth.

Nail polish remover

Use this tool to clean the coating of the device is very careful not to damage the surface.

Important! The liquid for removing varnish can clean the iron from the adhered polyethylene.

How to use:

1. Dampen the cotton swab with a small amount of liquid.
2. Wipe the contaminated area.
3. Remove any residue from the product with a damp cloth.

Hydropyte tablets

In the pharmacy kiosk you can buy hydroperite in the form of tablets. How to remove the adherent tissue from the iron with hydroperite tablets? Use this tool can be exactly the same as a cleaning pencil.

How to use:

1. Heat the iron to the maximum temperature.
2. With a whole tablet, wipe the contaminated area.
3. Remove the rest of the tablet with a damp cloth.

Important! The vapors that excrete tablets have a sharp and pungent odor. Therefore, treat the iron in a well-ventilated area.

to the contents ↑

How to clean the Teflon-coated iron?

Teflon-coated electric irons are the best selling product of this type in household appliances stores. They are usually multifunctional and able to smooth any fabric. But the incorrectly selected temperature regime of the iron often leads to the appearance of burnt leftovers on the sole. How to clean the iron from burnt tissue at home, so as not to damage the coating and not spoil the technique?

Cleaning method:

1. The best option for removing burnt fabrics for Teflon surfaces will be a pencil or a sponge.

Important! It is worth using such tools strictly following the instructions on the packaging of the goods.

1. If you do not have a cleaning pencil, replace it with acetic essence:
   • Clean the cloth with a cloth and thoroughly treat the coating.
   • Hard stains can be cleaned by ironing the cloth soaked in a cloth.

Important! When using acetic acid, observe the safety measures. Wear gloves to protect the hands. Beware of eye contact, as liquid may cause burns.

to the contents ↑

How to clean the iron at home from burnt cloth?- Useful tips:

• For cleaning, you can use cotton buds soaked in the selected product. On the toothpick, wind the cotton wool to remove any dirt from the holes through which steam escapes.
• After each ironing, wipe the soleplate with vinegar or other suitable remedy.

Important! Cleaning powders leave inconspicuous scratches on the soleplate of the electric iron. Subsequently, such cleaning of the decoction will appear more often.

• To iron woolen and synthetic items is through gauze or cotton fabric.
• Do not use sharp objects or sandpaper to remove traces of picklings to prevent scratches. If still used on the soleplate of stainless steel, periodically grind the surface with melted wax so as not to spoil the fabric.

In order to avoid the problem of burnt cloth on the sole of the iron in the future, set the correct temperature on the appliance. If you doubt the composition of the fabric, start ironing at a low temperature, increasing it if necessary. In cases where the surface is still contaminated, you already know how to clean the iron from adhering fabric using simple but effective methods.