Refrigerator Indesite Know Frost does not freeze the upper chamber - what's the problem?

The refrigerator is one of the most important household helpers, so when it starts to function incorrectly, you immediately want to find out what is the cause of the failure? Some - in a panic call the master, others - with a screwdriver at the ready rush to repair the device, along the way remembering how it all the same is arranged. The topic of today's article: the refrigerator "Indesit Know Frost", the upper chamber does not freeze - what's the problem, and can it be solved on its own?

to the contents ↑

Reasons for a breakdown

Refrigerator repair is not a simple matter. The best option is to contact an experienced master. But the availability of basic knowledge will not hurt. At least because there are such malfunctions that even a person can cope with, far from the technology and everything connected with it.

Refrigerator Indesit Noau Frost: the lower chamber does not freeze - what's the problem?

The refrigerator can be difficult to freeze for the following reasons:

1. The defrost button is activated. Perhaps you turned this button on accidentally. The design features of the INDESIT refrigerator are such that this happens quite often.
2. The motor has overheated. In this case, the motor shutdown occurs due to the operation of the protective relay. It's enough just to turn off the unit, let it stand a little, and then turn it back on.
3. Check that the appliance is switched on. This is a common occurrence if the plug moves or loosens.
4. Thermostat does not function. This is a fairly common fault. Check with the voltmeter supply voltage to the thermostat. If there is no voltage, the part must be replaced.
5. Refrigerant leaks. Contrary to popular belief, Freon is not toxic. So, if the refrigerator turns on normally, but does not freeze, the problem is precisely this.
6. Microcracks on freezer tubes. This happens if you try to clean the freezer with a knife during defrosting. There is a risk of damaging the handset that freon is entering. There is a leak, and the refrigerator stops frosting.
7. Factory-matched device.

to the contents ↑

Ways of troubleshooting

What is the problem, if the upper chamber does not freeze in the refrigerator "Indesit Know Frost", we sorted it out. Then the approach to repair depends on what is the cause of the breakdown.

refrigerant leak If this happens, you can not do without the help of a qualified technician. Using special equipment, he will add the missing freon to the system, and the device will start functioning normally.

Engine failure

With this breakdown, the homemade "samodelkin" also has nothing to do. It is necessary to make a complete defrost of the device and call the master.

The

filter drier is blocked. This is one of the most common problems. The air and water that enter the system accumulate there, and the passage of freon is difficult. Recognize the problem is easy on the "howl" of the compressor. Unfortunately, nothing you do without special knowledge and equipment. I'll have to contact the service center.

Compressor malfunction

The presence of the problem can be determined by the sound, since it is the compressor that periodically turns the pump on and off to move freon. Address to the expert.

Timer Failure It is possible that the timer is just stuck on the defrost function, so the camera does not freeze. Insert the screwdriver into the adjusting screw, carefully unscrew the ¼ turn clockwise.

Other causes of

These may be faults in the control unit, the relay controller and the thermostat. Without a specialist service center can not do. An exception is a relay-controller. If, during the disassembly of the part, it turns out that the salt rod inside is burnt out, it can be replaced without difficulty.

to the table of contents ↑

Useful advices

"Smart" technology requires delicate handling and caution. It will work well only when observing the rules of operation and proper care.

Here are a few basic recommendations that will help you avoid troubles:

• Install the unit on a flat surface. You can adjust the height by twisting or unscrewing the legs.
• The correct placement of food in the freezer( not close to its walls).Otherwise - the products will freeze, and you risk damaging the supply pipes.
• Even if you have a No Frost refrigerator, periodically defrost it. Do not attempt to clean the freezer with a knife or other sharp objects.
• Do not put hot dishes in the fridge. The whole system is programmed so that objects with high temperature will disable your device.
• Do not install the unit near heating appliances, heating lamps, or ovens.

If you are trying to find the answer to the question, the refrigerator "Indesit" does not freeze the lower chamber - what is the problem, and are not sure of their knowledge - there is nothing to risk in vain. Otherwise, you will suffer: morally and financially. Therefore, in the vast majority of cases, the wisest decision will be to call the master at home. In any case, it will cost you less than buying a new refrigerator.