Water heaters for flat flow

models In the summer, not everyone can tolerate a couple of weeks without hot water, and if outages and interruptions with the central system occur constantly,delight. Therefore, water heaters for flats are very popular. In shops they are sold very different: with different capacity, volume and type of food. How to choose a water heater for the apartment - we'll look at this article.

to contents ↑

Types of

heaters Water heaters are of three types, and they can all be installed in a city apartment.

Gas-flow

Also it is called a gas column. Modern models look very stylish, can be very compact, now they have nothing to do with the cumbersome installations that our parents found. The capacity of the gas heater is not less than that of the electric heater.

Its main difference is the use of gas, which in some cases allows you to save on tariffs.

Electric accumulator

It is also called a boiler. In this heat exchanger, water is heated to a temperature of 50-80 degrees. To maintain a constant temperature, a thermostat operating in automatic mode is used.

Important! Such equipment is used very simply, besides, it economically consumes electricity. One boiler is enough to use several water points.

The disadvantages of the boiler are few:

• The water heats up long enough;
• Large installation size;
• Need to clean the tank.

There are modern models of more compact dimensions, but there are not many of them yet.

Important! The water heater needs periodic disassembly in order to remove lime scale, rust and debris.

Electric flow-through

Such a flow-through electric water heater for an apartment needs a stronger power grid. Usually it is connected together with an electric stove. Such units instantly supply hot water, but at the same time a large amount of electricity is wasted.

to the contents ↑

How the flowing electric heater

works This device does not have a storage tank, the water heats up almost instantly. In order to adjust the heating temperature, the water head drops or rises.

Important! Of course, with the help of such a device, time is saved, first of all.

This device is presented in the form of a small box with a TEN inside it. The heater is washed by thin streams of water, which heats up quickly.

Important! At a high pressure, the water temperature will fall. Hence - too hot water with a strong head from the flowing water heater will not arrive.

Most often in budget and simple models of water heaters there is a thermostat that regulates the temperature. Expensive models are equipped with an electronic panel with sensors and timers.

to Contents ↑

Key Features of

Before choosing a water heater for an apartment, you need to study the basic characteristics. The most important of them is the power of the TEN.A flowing electric water heater is a very powerful device that needs separate wiring.

Important! This device must be grounded!

It is not necessary to buy a water heater with a capacity of more than 5 kW in a private house, since the wiring simply will not survive. In addition, in such powerful devices there is no power cord and plug.

The dimensions of the water heater are small, in addition, they have a very simple wiring diagram.

In most similar water heaters there is an automatic switch-off / on-off system.

Important! If an electric stove is installed in the apartment or house, the wiring will do well with the flowing water heater, otherwise - it is not worth the risk with the installation.

to the contents ↑

Functioning principle

Electric flow heaters operate in different ways. They are pressure and non-pressure.

Flowless pressureless water heaters

In such a device, the internal pressure is not higher than the atmospheric pressure. The tap located at the inlet serves to protect the water heater from high pressure, which can occur in the water supply. At the exit the tap is absent, since nothing should prevent the free outlet of water, otherwise - the device may break down.

Important! Most often complete with a flowless pressureless water heater is a special shower nozzle, so it only works as a shower. This device is very convenient to use at the cottage.

The non-pressure water heaters are not very powerful, they can not cope with significant water heating. They are most often installed in the kitchen, for washing dishes, or used as a summer shower.

Important! The main advantage of such a device is a simple installation, in which no replacement of the wiring is required, it will withstand the standard one.

Flow-through pressure water heaters

In such a device there are no attachments, it is equipped with only an inlet and an outlet for water. To this device, you can connect several mixers, which is very convenient. If hot water supply is suddenly turned off, you can quite easily take a shower or wash dishes.

Important! The pressure flowing water heater is switched on and off automatically.

Usually for installation of similar water heaters choose a place under a sink. Models are single-phase and three-phase.

The main advantage is that in such a device with the electronic control system the necessary temperature is automatically maintained, to which water is heated.

Important! The disadvantages are all two: high power consumption and high price.

to the contents ↑

Overview of the

models To understand which water heater for the apartment is better to choose, you can take on user-tested models.

Rapid RLD - 01

Distinctive feature of this device is an unusual performance. Externally, the device is similar to a conventional mixer, but the crane performs more functions.

Important! The compact dimensions of the water heater allow it to be used both in the apartment and in the country house.

Advantages are:

• Ease of installation;
• High Productivity;
• Reliability;
• Longevity;
• Rapid heating of water;
• Maintaining a constant temperature;
• Cost-effectiveness.

TESY IWH 35 X01 KI

This device must be attached to the valve. From it, water enters the heating element, where it heats up almost instantaneously.

Its main advantages are mobility and small dimensions. In addition, it is very simple to install and fix it on the tap. The temperature mode can be adjusted.

Atmor

The products of this brand are very popular. For a minute the water heater lets through two liters of water. The maximum temperature is 50 degrees.

This equipment will work up to twenty years, moreover, its use is very simple, since it is enough to press the button and open the tap to heat the TET.The water heater is equipped with a pressure sensor and a sensor to protect against overheating.

Important! The equipment can be installed in an apartment with regular wiring. Despite the high productivity, the device weighs no more than 1 kg.

Kospel EPP Maximus

This device is suitable for equipping several points of draw-off. Thanks to the electronics in the control, the temperature is set exactly, the heating of the water is smooth. To protect the heating element is designed by a copper casing, which does not allow impurities to enter.

In order to enjoy the flowing water heater for a long time, you do not need to buy the first one, but carefully approach the moment of your choice. The correct selection of the power and the manufacturer is required. In addition, his work affects the composition of water and the voltage in the network. Choose and connect the device correctly!