- Disassembly tools
- How to disassemble a Samsung vacuum cleaner?
- How to disassemble the Samsung engine in a vacuum cleaner?
- A few words about cleaning the device to remove dust and debris:
If your vacuum cleaner Samsung started to produce strange, uncharacteristic sounds during its operation, or it sucks up garbage badly during cleaning, it is a signal that it should be disassembled and howminimum clean. How to disassemble the Samsung vacuum cleaner correctly, without any disastrous consequences for the technology and its owner, we'll talk in this article.
to the contents ↑Disassembly tools
To disassemble the device quickly and without breakdowns, you must prepare in advance the tools with which you will perform the process. For this you will need:
- Pliers.
- Screwdriver for small screws.
- Screwdriver for large screws.
- Flat blade screwdriver.
- Lubricant fluid( may be needed to lubricate the engine).
Important! Before you begin any disassembly activities with the domestic unit, be sure to turn off the vacuum cleaner from the power supply.
to the contents ↑How to disassemble the Samsung vacuum cleaner?
- First disconnect the hose from the housing - this part will not be necessary for you and will only interfere with the subsequent operations.
- Remove the garbage collection container.
- Remove the main and rear filters.
Important! The garbage container and filter should be rinsed under running water.
- Use a Phillips screwdriver to unscrew all the bolts under the cassette container.
- Carefully lift the body, starting from its front part, and smoothly moving upwards, remove it from the design of the vacuum cleaner.
Important! Pay attention to the presence of dust on the inside of the body and the engine. If it is, remove the dust with a dry cloth and brush.
to the contents ↑How to disassemble the Samsung engine in a vacuum cleaner?
Sometimes you have to disassemble not only the body of the dust collector, but also the "heart" of the vacuum cleaner to understand the cause of malfunctions or breakdowns. This can also be done independently, using the same tools.
Important! In order not to lose the cogs, they can be twisted into the same connectors immediately after disassembling the parts. Then you will know exactly where the bolt was originally.
Procedure:
- Remove the motor bolts located on the top.
- It is possible to remove the device only by completely releasing it from the wires fixed on the perimeter. For this, carefully disconnect the connectors.
Important! Before you disassemble the Samsung vacuum cleaner and remove the engine from the general design, make sure that the technique is inactive, all connectors are disconnected, and the wires do not get tangled in some parts of the device that protrude.
- Disconnect the rubber sealing ring located on the bottom of the motor and bolted.
Important! During disassembly, always keep dust on the parts and always remove it if necessary.
- Please note that the motor housing consists of two halves. To disassemble it, use a flat-blade screwdriver. Gently inserting a screwdriver into the gap, you need to walk slowly around the perimeter, poddevaya upper half. After such manipulations, it is possible to extract the motor itself, which is in a plastic container of small size.
- In a similar way, use a flat-blade screwdriver to remove the motor cover.
- Using the end head, disconnect the turbine.
- Remove the two screws and the screws located on the ends on the brushes.
- Now the last step is to remove the anchor from the engine.
Important! The assembly of the vacuum cleaner and engine after cleaning should be carried out in the reverse order.
to the contents ↑A few words about cleaning the device for dust and debris removal:
- Samsung parts are cleaned mainly with a soft brush and a dry cloth.
Important! You can use a dry paint brush for these purposes.
- Some elements, such as plastic housing, filters, garbage can be treated with a soap solution and clean running water.
Important! After contact with water, be sure to carefully dry all the elements before installing them in their place.
As you can see, to dismantle a vacuum cleaner Samsung does not represent special complexity. The main thing is to find out all the connecting bolts and unscrew them, otherwise you risk damaging the plastic parts. But sometimes you do not need to repair or clean the dust-collecting unit yourself, but ask for help from a specialist. Then you will accurately disassemble and assemble the device and qualitatively clean it.
