Error codes - washing machine Samsung

You, as usual, turned on the washing machine, and after a while you saw a strange abbreviation on the display?- Do not be in a hurry to get upset. Many error codes of washing machines Samsung just exist so that you can understand what the fault is, and if possible, eliminate it yourself. Some explanations of digital messages are indicated in the instruction manual for household appliances, but as a rule, only a small part is described there. Thanks to our article you can easily understand which error codes the Samsung washing machine can give out most often and what to do about it.

Important! With the same breakage, different models of Samsung machines can produce different abbreviations. The error codes will differ for washing machines of new and old type, fully automatic, and special designations have a technique from the USA.

to the contents ↑

Messages about problems with the water level sensor( pressure switch) - 1E

In the old models, the error code is 1EE7, in the imported from the USA - LE, in fully automatic - again 1E.

Possible Causes:

• The water level sensor pipe is disconnected.
• The pressure switch tube is damaged mechanically or punctured.
• The water level sensor tube is clogged or clogged.
• Contacts of the pressure switch are defective or oxidized.
• During the air hose connection, too much sealant was applied.
• Clogging or other damage to the water level switch.
• Malfunction in the control module of the machine.

Solutions:

1. Make sure that the water level sensor tube is securely connected.
2. Inspect the pressure switch carefully. It should be free of chips and other visible damage.
3. Remove the water level sensor tube and, if clogged, clean it.
4. Clean the contacts of the relay itself, as well as those that are connected to it.
5. If the relay fails, replace it.

to the contents ↑

Motor tamper sensor errors

The tachogenerator( tachogenerator) takes into account the number of revolutions. In the event of a malfunction, the drum rotates uncontrollably - the number of revolutions may differ significantly from the desired consonant of the specified washing schedule.

Washing machine error Samsung 3E

Error display options in the old mode: 3E, EA, EB, 8E.

This abbreviation indicates a failure of the washing machine Samsung:

• Engine rotation delay.
• Damage to the motor windings.
• Malfunction of tachogenerator connections and contacts.
• A foreign object hit the engine and jammed it.

Possible solutions for fault 3E:

1. Test the motor wiring for continuity.
2. Inspect the motor contacts and clean them if necessary.
3. Check the continuity and condition of the connections and contacts of the device, and then repair the fault.
4. Inspect the rotor of the engine and find out what jammed it. Remove foreign objects from the engine.

Error code of washing machine Samsung 3E1

The machines of the old and the new sample give the same designation - 3E1, but on "American women" you will see E3.

Reasons:

• Too many things were downloaded to the tank.
• Damage to motor connections and contacts.
• Tachodachik disappeared. How to fix the error:
  1. Take away unwanted underwear and restart the program.
  2. The motor contacts may have oxidized - peel them.
  3. Check the functionality of the Hall sensor. If necessary, replace it.

  Error 3E2

  You will see this error of the Samsung washing machine in the case of a weak signal from the tachogenerator.

  To resolve the problem:

  1. Check the integrity of the connections and contacts of the device.
  2. Make sure that the relay of the tachometer itself is working properly.

  Error message 3E3

  In the old mode, this error has the same designation - 3E3, in the models from the states - bE.

  Such a message may appear on the display in the case of:

  • Receipt of erroneous signals from the tachogenerator.
  • There are no signals from the control module.
  • The motor parts have shifted.

  What to do:

  1. Check the integrity of the device and the appropriate wires.
  2. Inspect the contacts of the control unit, if necessary, clean them.
  3. Measure the clearances in the drive and compare them with the reference ones.

  Error code 3E4

  Causes:

  • The motor or tachometer contacts are damaged or worn out.
  • Breakage of the sensor.
  • Engine breakdown.

  Remedies:

  1. If possible, ring all contacts, and also clean them.
  2. Check the serviceability of the gearmotor and the motor.
  to contents ↑

  Water supply problems:

  error codes If there is insufficient or excessive water supply, the water temperature does not match the set washing mode, the smart technology will immediately tell you one of the following codes.

  4E - water supply error

  Quite often, users can see this error code of Samsung washing machines. In older models, it will be displayed as 4E or E1.

  Sources of error:

  • A foreign object has entered the water supply valve.
  • The washing machine does not receive water.
  • Faulty contacts of the valve in the bay.
  • Hot water was connected instead of cold water.
  • The hose that goes to the powder container is damaged or disconnected.

  Solutions:

  1. Remove the filler hose, clean if necessary.
  2. Check that there is water in the water supply and that the water supply shutoff valve is open for the styralka.
  3. Check the integrity of the contacts, peel them.
  4. Connect cold water to the washing machine.
  5. Check that the hose is connected to the powder receptacle. Also, it may be clogged or damaged.

  4E1, 4E2 - increased water temperature

  The old error mode has the abbreviation 4 Ed and E8.The cause of these two errors is the excessive temperature of the water supplied. For example, if the washing is in the "delicate" or "six" mode, the water will be above 50 ° C, then you will see the error of the Samsung 4E2 washing machine.

  To solve the problem it is necessary: ​​

  1. Connect the machine correctly and connect the hoses according to the instructions.
  2. Check the temperature sensor.
  to the contents ↑

  Locking codes for the washing machine hatch Samsung

  It's not a very pleasant situation when the stylalk door does not want to open. How to deal with the cause?- Look at the information that appears on the display.

  dE door

  Quite often, an error on the Samsung washing machine indicates that after washing you simply can not open the door of the hatch. In the old format, the fault is displayed as dE or Ed door, and in US models dS before operation and dL during washing.

  Possible Causes:

  • Hook hook curved switch contact broken.
  • Locked the door tried to open by force.
  • The control module has failed.
  • During boiling, the hatch is displaced due to strong heating.

  Your actions:

  1. If the error occurs for the first time, unplug the machine from the mains and then turn it on again. Perhaps there was a failure in the management module, and a reboot will help fix it.
  2. If the above method does not help, do not try to open the door by force - better call the master.

  dE1

  Causes of a de1 error on the washing machine Samsung:

  • The door lock connector is damaged or incorrectly connected.
  • If such a problem occurs intermittently, then there may be a reason in the damage to the electrical insulation.
  • The control panel is damaged.

  Possible actions:

  1. Make sure the connection and integrity of the hatch lock connector are correct.
  2. Check the insulation of the wire that goes to the hatch lock.
  3. Replace the control module.
  to the contents ↑

  Water leakage error - LE

  The le error on the Samsung washing machine can also be designated as LE1, 11E or E9.

  The most common fault occurs in such cases:

  • Water leakage from the tank.
  • The water leak detector is not working properly or damaged.

  Solution options:

  1. Make sure the integrity of the tank, pay special attention to the mounting location of the transport bolts.
  2. Check whether the heater is tightly installed.
  3. If there is a puddle near the drain filter, check to see if it is completely curled.
  4. If a water leak occurs during spinning, check that the air hose is connected.
  5. Make sure that the hose going to the powder tray is connected and in good condition.
  6. If you have poured too much gel, which caused excessive foaming and leakage, then you need to stop washing and wash the machine.
  7. Make sure all the rubber bands are in place and whether they are intact.
  8. Check for damage to the drain hose.
  9. Carefully inspect the contacts and wires leading to the water leakage sensor.
  10. If there is a le error on the Samsung washing machine and the leakage protection system is faulty, it can only be replaced.
  to the contents ↑

  UE - unbalance error

  If the error ue is shown on the display of the washing machine Samsung, then it is not particularly worried. By the way, the tank imbalance problem can also have the abbreviation E4 and dc.

  Causes of this kind of error:

  • Unevenly laid laundry or you put only one heavy and three-dimensional thing.
  • Balancing of equipment is broken.

  To solve the problem it is necessary: ​​

  1. Evenly distribute the laundry in the middle of the drum.
  2. Add a thing-counterweight, if it is possible to limit the weight of the laundry.
  3. Load a maximum of two kilograms of bed linen and set the spin speed to no more than 800 rpm.
  4. Balance the washing machine using the recommendations in the user's manual.

  You can load the maximum washing weight in the drum only in the "Cotton" mode. To learn more about how to properly load your washing machine, carefully study the user manual.

  As you can see, the error ue washing machine Samsung - one of the most innocuous and does not require a call to the wizard.

  to the contents ↑

  Errors of the heating element

  The heater is one of the most vulnerable parts of the Samsung washing machine, therefore the error h1 or h2 appears quite often on the display.

  HE and H1 error

  This error code can also be referred to as E5, Hr and HE1, E1, Ec.

  Causes of occurrence:

  • TES closed or damaged contacts.
  • The temperature sensor is defective.
  • The water in the tank reached a temperature above 100 ° C, due to overheating of the heater.
  • The control module relay is faulty.

  Your actions:

  1. Inspect the heater carefully.
  2. Call the electric heater and its contacts.
  3. Check that the temperature sensor is operating correctly.
  4. Replace the relay on the control module.

  HE2( H1)

  Washing machine Samsung produces an error h2 if the temperature in the center of the drying heater exceeds 145 ° C and the red temperature sensor is activated.

  Remedy:

  1. Slightly press the button in the center of the sensor several times.
  2. Replace the sensor if it does not work correctly.

  As you can see, sometimes the error of Samsung washing machine can be easily eliminated simply knowing the reason for its occurrence, and in some cases serious repair and replacement of parts will be required. We hope that in your case there is no complicated breakdown and you just had a reason to get better acquainted with the capabilities and functions of your technology.