How do I wash the line from my clothes?

Barcode reader is a device that is in a pencil case, bag, on the desktop, almost every schoolboy, student or office worker. It perfectly helps to correct mistakes made while writing some material. But what to do when the bar-proofreader hits the surface of clothes, how to wash the line from clothes? The main thing - do not panic. You have seen this article, which means you are lucky, because here we will teach you to remove the stain from the bar-proofreader on any basis.

to the contents ↑

What should I do if I get contamination from the barcode on the clothes?

To properly wash the finishing touch from the clothes, and do not drive the white substance even deeper into the fabric fibers:

• Do not dispose of the corrector under any circumstances. Look at the composition of the corrective fluid. You need to determine what kind of barcode is your type. The device for correcting blots in texts can be made for example on: water, emulsion, and also alcohol basis. Dry proofreaders are also on the market.
• Having determined the corrector type, immediately start acting. The earlier you start to fight against the stain, the more effective will be the elimination of contamination from the surface of clothing.
• The actions you should take to clean clothes are similar, but they should depend on the type of corrector.

to the contents ↑

General preliminary recommendations

Barcode stains refer to the number of contaminants that are difficult to strip off the surface of the fabric material, but in spite of this, they can be tried to remove using certain chemical or improvised means. However, first take into account a number of details that can affect the success and effectiveness of such a procedure:

• Due to its special composition, the contamination from the barcoder is firmly absorbed into the fabric fibers of any material. Therefore, noticing the corrector spray on clothes, do not wait until they dry up. The best way is to blot the dirt with a sponge or a soft cloth, but do not rub it.
• If you notice drops from the corrector right away, they dried up, then before you start to influence the contamination with any special means, most of the proofreader is better "cleaned" on the surface of clothes. To do this, use a metal object with no sharp edges, so as not to damage the structure of the material, for example, a nail file. Tooth soft brushes will also help you.
• Trying to remove the stain from the stroke, do not wash the affected items immediately in hot water. Boiling will adversely affect this kind of pollution. Under the influence of high temperature the corrector on the fabric is simply brewed. As a result, it will be almost impossible to remove it, even with strong substances.
• Do not use bleach or stain removers to try to clean the stains from the barcoder from the surface of the dyed fabrics.
• Means that are created on an alcohol basis, must be used extremely carefully, especially for artificial as well as synthetic fabrics. Testing is carried out on the inside of your thing at the site of the internal seam or on a cut of the same material from which the clothes are sewn.

to the contents ↑

Water-based corrector - how to remove clothing?

If you have stained clothes with putty, which is made on a water basis, consider that you are an incredible lucky person. This kind of corrective substance easily goes away from clothes.

Clean contamination with conventional soaking. Soak the thing for about 20-30 minutes in cool soapy water, and then wash it in the machine in the mode that is appropriate for this type of fabric. The spot is liquidated easily and without any difficulty.

to content ↑

Corrector on alcohol or emulsion base - how to remove from tissue?

To wipe off the garment a stroke on this basis, you will have to tinker a bit:

1. Wait until the corrector dries on the clothes.
2. Try to clean the part of the dried putty as gently as possible "dry".
3. You can eliminate the remaining contamination with a cotton disc moistened in cologne, vodka or tonic.
4. After that, wash clothes in the car in the required temperature mode - it is indicated on the clothing tag.

to Contents ↑

Solvent-based corrector - how to wash off clothing?

The most difficult thing is to remove contamination from the barcode corrector, which is made on the basis of a solvent. In order to get rid of contamination, take:

• piece of clean cloth;
• several wadded disks;
• solvent 647, white spirit or liquid for removing varnish - you can take any of these options.
  

Then proceed in such a way as to wash the finishing touch from the clothes:

1. Turn the product inside out.
2. To avoid unpleasant consequences, try the action of the solvent on the inner seam of the product. In the event that the thing is not deformed, and the paint is not washed off, you can safely proceed to cleaning.
3. Attach a clean cloth to the front of the product to protect things from exposure with solvent.
4. Gently treat the contamination surface with a cotton pad dipped in the solvent you selected, move from the edges of the dirt to the center.
5. At the end of cleaning, wash clothes in the car in your usual way.

Important! In the event that you notice that the solvent that you use spoils the fabric, do not start cleaning the thing yourself. Ask for help in dry cleaning. Under no circumstances do not wash clothes. None of the dry cleaners will give you a full guarantee that the contamination from the barcoder will be removed completely after you wash the thing. The impact of water, as well as powder, can lead you to the fact that you will forever have to say goodbye to your favorite clothes.

to Contents ↑

A solid barcoder - how to remove stain from the fabric?

Pollution from the corrector tape is easy to wash. Soak in a cool soapy water thing for 40-60 minutes. After that, carefully remove the tape. Wash the thing using the delicate washing mode in the washing machine.

Important! The most difficult contamination is washed from delicate fabrics, such as: velvet, wool. It is best to give such delicate things immediately to a dry cleaner, and under no circumstances should you use pre-wiping.

Having become acquainted with this material, you will now find it hard to catch unawares. And the stain from the proofreader will not make your eyes blush and make your brain panic, thinking about how to wash the line off your clothes.