How to remove scratches on the laminate?

To date, the laminate coating is very much in demand. Due to its technical characteristics and the variety of structures, it is a worthy competition to the parquet floor. The price of this coating is several times lower, but its advantages are not less than expensive flooring. How to remove scratches on the laminate, because they occur often enough, and each time to change the damaged plate does not want at all? All the ways to remove defects from the surface of the laminate you will learn from this article.

to content ↑

Advantages of laminate coating:

• Laminated coating at low cost has high wear-resistant properties.
• Laminate does not require special care, painting or varnishing. It is enough to clean in a timely manner.
• Special anti-static coating does not allow to accumulate dust and dirt.
• Traces from a felt pen or ballpoint pen are easily removed with acetone or a more gentle solvent.
• The variety of textures makes it possible to lay laminate not only at home, but to choose a design that corresponds to the design of a cafe or office.
• A simple lock system makes laying quick and easy.
• Excellent sound and heat insulation. If necessary, you can additionally install a waterproof laminate.
• The service life is more than 10 years.

Given such a long service life, it is very difficult to protect the coating from scratching dents or chips. Therefore, it is very appropriate information how to remove scratches from the laminate floor at home. We picked the simplest, but user-proven ways.

If it so happened that scratches appeared on the surface of the laminate, do not despair. You do not have to completely re-lay the floor. You can solve this problem at home. The only thing that has to be done is to assess to what extent the laminated flooring is damaged. This will determine which way to fix the defect you apply.

to the table of contents ↑

Wax pencil

Inexpensive and practical tool than to cover the scratches on the laminate. In addition, after applying it to the damaged area, a thin protective film forms on the surface, which prevents moisture and dust from entering, which significantly extends the life of the material. A wide range of colors makes it easy to choose the right shade of the pencil, which will fully match the color of your laminate.

Important! Before applying the product in the visible area of ​​the coating, test it on a barely visible section of the floor.

Advantages of

You can buy a pencil for laminate in any construction shop. In addition to its protective properties, this tool has a number of positive qualities:

• Small pencil dimensions make it possible to store it in small lockers.
• Long shelf life allows you to save a pencil in case of new damage.
• Simple instructions for use, which even children can easily handle.

How to use:

1. Choose a pencil that matches the shade of your flooring.
2. Clean the floor surface from dirt and dust.

Important! The presence of dust or small debris can cause detachment of the wax from the laminate.

1. Apply with gentle pressure on the affected area.

Important! Make sure that the pencil densely covers the entire scratch in depth and length.

1. Finally, polish the reconstructed area of ​​the laminate with a clean, lint-free cloth.

to Contents ↑

Wax

Wax pencil is used when scratches on the laminate have already formed. But wax can cover the entire surface of the floor, even before it appears on any damage. After treatment, a protective film forms on the coating, which will prevent scratching.

How to use:

1. Before cleaning, clean the floor of small debris, sand and dust.
2. Apply a thin layer of wax over the entire surface.
3. Allow the laminate to dry thoroughly.

Important! In no case do not cover the floor of the laminate with varnish. Under its layer of unevenness and dust will be more noticeable.

to the contents ↑

How to restore laminate in case of deep damage?

Because of frequent rearrangements of furniture or walking on the floor in shoes, especially on heels, scratches can appear on the laminate much deeper than from the claws of an animal or ordinary rubbish. Mask such defects on the flooring is much more difficult. How to restore laminate floor from scuffs or deep scratches?

In this case, you will have to use a tool that will be more effective than a wax pencil. In the building shops you can buy special putty.

Important! In order to find a suitable tool for color, take a small lamella from the laminated board. Thanks to the huge range of colors of the special product, you can choose the color that suits you.

If the structure of your floor is not monophonic, but there is a wood texture or pattern, you can mix several shades of the tool to get the desired color.

The product is produced in several consistency variants:

• Solid in the form of a briquette.
• Viscous in a tube.
• Powdery.

Important! Regardless of the type of your chosen product, applying it on the flooring, you should take special care and strictly adhere to the proportions and recommendations of the manufacturer for use.

Do not know how to remove scratches on the laminate? Excellent will cope with unattractive defects on the floor putty in the form of briquettes. Special composition of the product penetrates well into the structure of the flooring and masks all flaws.

How to use:

1. Clean the damaged area of ​​sand and dust.
2. Apply the product in small portions, adhering to the pattern on the laminate.

Important! To qualitatively apply paste, use a plastic or metal narrow knife.

1. Finally, use a soft sponge to walk through the restored scratch and remove the excess material.

Important! If the paste is out of the scratches during the processing, it must be urgently removed. Otherwise, when it dries, it will be much harder to remove. At the worst outcome there will be unevenness on the surface.

Viscous putty in tube

To use this product, it is necessary to prepare a spatula made of wood or plastic.

How to use:

1. Clean the surface of dirt.
2. Put some putty on the scratch and the same amount on the spatula.
3. Slightly pressing the putty into the damage, level it evenly with a spatula.
4. Wipe the treated area with a damp cloth. We wipe the traces of putty, which went beyond the scratch.

Important! Walk on the floor and make furniture room can only after the full drying of the product. It takes about 30 minutes to 1 hour depending on the amount of scratches.

1. Finally, polish the repaired floor with a soft, dry cloth.

Application of a special set for repair of laminate coating

Many of us are busy people, and most do not have much free time. And if it does, then there is no special desire to engage in repair work. It is for this reason that technologists have come up with a special kit for repairing flooring from laminate. It includes all the necessary tools that you need to eliminate damage of any complexity. Experts recommend that before installing the laminate necessarily purchase this repair kit, so that the question of how to remove scratches on the laminate floor at home was permanently resolved.

How to use:

1. As in the previous versions, we clean the flooring from dirt and dust.
2. Scratch on all sides with adhesive tape or tape.

Important! If the putty gets on the laminate, new scratches may appear during the removal process.

1. Using the spatula that comes with the kit, apply the product by carefully pressing the raw material into a scratch.
2. Allow surface to dry thoroughly.

Replacement of the damaged board

All described options are suitable for eliminating not too voluminous and shallow defects of the floor board. But in the case when the laminate under the weight of the furniture is fully sold or the scratch is too deep, nothing remains, how to replace the board with a new one. Replacing the board is a simple process, except when the locks on the boards are glued or the damaged board is in the middle of the room.

Instructions for dismantling:

1. Using a hammer or other tool, carefully remove the skirting board.
2. Unhurried movements, disconnect all straps to the damaged location.

Important! In order not to confuse the sequence, number them.

1. Replace the old defective board with a new one.

Important! In order to match the shade of the slats, it is desirable to have several spare laminate boards.

1. Assemble the floor, following the sequence of numbered slats.
2. Fasten the plinth back into place.

to the contents ↑

Advice on how to protect the laminate from damage

To avoid the problem of how to remove scratches on the laminate, you should adhere to the extremely simple rules:

• Do not use metal brushes and aids containing abrasives.
• In the household chemistry department, purchase special fluids for the care of such flooring.
• Remove the stain from the wax or chewing gum after it has completely hardened.
• After wet cleaning of the floor, wait until it is completely dry. Thus, you prevent the appearance of divorces.

Important! Laminate in the wet state is very slippery, so it is undesirable to walk on it so as not to slip.

• Before laying the laminate, buy special lining on the furniture and legs from the chair.
• Before entering the room, lay a mat - it will leave dust and dirt from the shoes.
• It is undesirable to defile on such a flooring on stiletto heels.
• To keep the floor from scratches and other defects longer, lay a thin carpet.

It's worth remembering that it's much easier to prevent scratches and dents on the surface, than to look for ways to repair scratches on the laminate. Leave yourself a note of the methods suggested in the article, and your laminated coating for a long time will keep the novelty and nice shine.