How to install eyelets without tools?

eyelets The eyelets are mostly used for decorative purposes, in particular to give a neat appearance to the holes, to prevent tissue shedding. This type of fastening is considered the most reliable in cases of work with both paper and cloth. The use of eyelets is not for everyone, because the factory tools and tools used to install them are quite expensive. Therefore, it is much more convenient to use the services of a master or try to attach the eyelet yourself. Today we learn how to install eyelets without tools at home, because sometimes it is difficult to find even a workshop, wherever they were available.

to content ↑

Features of application and installation of the

eyelets They are used on fabrics and paper. With their help make out all kinds of functional openings on notepads, labels, postcards, labels, album sheets. When it is necessary to fasten very few sheets of paper, the eyelet is often used, because it solves simultaneously two questions - fastens sheets, fixes them.

If you correctly install such a device, then it will look much more accurate, than a more usual stapler or glue. The main problem faced by everyone who decides to install the eyelet independently is a wide variety of product diameters.

It's not enough just to buy a hand press, because as for the eyelets with each diameter you need to select your nozzle. Given the variety of shapes and diameters, only one conclusion suggests that it will be necessary to complete the installation press, which is not cheap. That is why many are interested in how to put eyelets without tools with the help of improvised devices.

to the contents ↑

How to install the eyelets with the help of handy tools?

In addition to the special press, you can use forceps. Of course, they allow you to perform not so wide operations, but to install products with a small diameter are quite suitable.

Important! You can buy a set of punches in the building shop, but even this does not solve the issue with the largest diameters, most often used for sewing curtains, heavy curtains.

For convenience, the diameter and dimensions of the eyelets are specially marked. So, each product consists of a leg and a cap, thus the length of the stem directly depends on the thickness of the material, which must be pierced.

Important! Denote this value by the letter L. The diameter of the leg itself, and the hole, which we get as a result, by the letter D.

to the contents ↑

The tools and materials required for installation

Before considering in detail how to install the eyelets on clothes with your own hands,list the following materials:

• Eyelets of the required diameter.
• Marker or pencil.
• Ruler.
• Stationery knife.
• A piece of linoleum or a rubber mat.
• Flat piece of iron.
• Heavy hammer.
• Element for flattening the product leg.

As we have already found out, eyelets can differ in diameter, in fact, their value depends on this parameter. To install the smallest parts, use steel bars with rounded ends or balls from the bearings. Excellent for this purpose, the rods are made of metal with a conical end, the main thing is that they are larger in diameter than the eyelets.

Important! A skilled master will be able to make a whole set with the help of a lathe and iron rods with different diameters, which will be useful for installation. It is quite easy to round the ends of the rods on the machine and to sharpen them in the form of a cone.

to the contents ↑

Self-aligning the

eyelets With your own hands it's easy to install the eyelets, you just need to strictly follow these instructions:

• Make markings, mark on the cloth or paper the places where the holes will be. To measure more accurately, you can use the ruler.

Important! To make it easier to work with the thickest materials or paper, if the hole is too close to the edge, it is better to use a punch.

• Do not rush to pierce the holes, first carefully compare whether the holes of the eyelet and the punch meet. To ensure that the eyelets do not fall out in the future, it is necessary to make sure that the diameter of the punch is smaller.

Important! Small diameter holes can be made using a clerical knife or an ordinary silk. If you work with a cloth, then before piercing the holes, you should treat the punching place with adhesive.

• Gently insert the eyelet into the finished hole, so that the hat is on the front side, but the leg goes out on the wrong side.
• To prevent damage to the surface on a substrate designed to reduce noise, put an iron sheet or a metal ruler.
• Place the paper with the eyelet on the substrate so that the leg protrudes upward.
• Insert the flattening device into the stem, first cutting or opening its edges.
• Hit as hard as possible with a hammer on the inserted tool.

Important! This installation option is considered the easiest, but if you first encounter this job, then be patient. First do the same on a small piece of unnecessary fabric. If you adjust a little using these tools, then in the future you can easily attach eyelets to yourself, because this process requires accuracy, care, skill.

to the contents ↑

Useful tips for installing the

eyelets Here we answered the question that concerns us, how to put eyelets on clothes, without special tools. But as it turned out, this process is quite painstaking, requiring special attention. Before you start, it is recommended that you get acquainted with the useful advice of specialists:

• Do not forget that it is much easier to install eyelets with the lowest height.
• To work most easily with products made of stainless non-ferrous metals. How to identify them? You can use a magnet to which the steel eyelets will stick instantly.
• With steel appliances it is more difficult to work, because to beat them, it is necessary to exert tremendous force. And in such situations they are often deformed.
• Do not install the eyelets on the rubber surface, because in case of a miss or an unsuccessful stroke, they may break.
• You can install the products on a lead plate, that's just enough for a while. It is necessary to heat the plate with the help of a gas burner, so that it aligns and continue to work.

Perhaps you will quickly master the way that describes how to install eyelets without tools on fabric or paper. But if you decide to do this on a permanent basis, it is more reasonable to purchase in the future special equipment that allows you to install a large number of eyelets in the shortest possible time.