How to remove mold from a tree

Mold is a harmful fungus that develops in conditions of high humidity and heat. How to remove mold from a tree is a very topical and reasonable question, especially for those who have a wooden house and who care about their condition and their health. The mold reproduces by spores and there are many of them in the environment. Once the fungus spores run into favorable conditions for growth, they become fixed and begin to develop. To cope with such a problem with minimal effort, we have gathered in this article all the ways that you know how and how to remove mold from a tree and prevent its reappearance.

to the contents ↑

How to remove mold from wood?

Earlier in Russia, knowing the harmfulness of the fungus and not having the necessary knowledge to deal with it, houses affected by mold were simply burned. In our time there are many effective means of neutralizing this parasite. First, you need to understand that the fungus develops where there is high humidity and there is no optimal air circulation. First of all, wooden surfaces suffer, since it is pure organic and is doubly favorable for growth of mold. The tree initially darkens and then quickly disappears.

Given these facts, do not delay as soon as you notice the first manifestations of the fungus. At once, arm yourself with the means that you have available and act! In this fight you will need:

• wood bleaches;
• antiseptics;
• hydrogen peroxide;
• vinegar;
• drill;
• ammonia;
• baking soda;
• tea tree oil or pine oil;
• grapefruit seed extract;
• linseed oil or glue.

Note: Any of these remedies can overcome the fungal infection on the body of the tree, if used correctly.

to the contents ↑

How to remove mold from wood?

You have to understand that you can not start mold. If the fungus is deeply embedded in the tree, then it will not be removed. Therefore, the earlier you notice the mold and start acting, the better.

Note: Ideally, the wood is treated with antiseptics before assembly, which can prevent mold in principle. If such precautions were ignored, then the probability of its occurrence is quite actual .

When you have mold, it means that your house is not dry enough. If you do not provide the optimal humidity and ventilation system, the rest of the manipulations are useless. Take all the necessary measures, and you can start using special means - then the fungus will be defeated forever.

If no one is allergic to your house, you can use specially designed antifungal chemicals to remove the mold from the tree. In this case, the entire process will consist of several stages:

Cleaning of the lesion:

1. With a knife, a metal brush or a special tool, peel the fungus.
2. Clean the peeled material.
3. Wash the area with a detergent solution.

Treatment of wood surface from mold spores:

1. Buy special antiseptic for wood. In doing so, be sure to consult with specialists.
2. Prepare the mortar according to the manufacturer's instructions.
3. Treat affected area and area around it.

Note: It is desirable to conduct manipulations with chemical materials in non-residential premises, as they degrade air quality. The harmfulness of such fumes is prevented by the manufacturers themselves. Therefore, most experts recommend the use of natural remedies for the removal of fungus in the house where you currently live.

to the contents ↑

How and how to remove mold from wood?

There are several natural means of combating mold on the tree and as many ways to use them.

Method 1

Vinegar is a natural disinfector. Apply it and mold is eliminated:

1. Collect undiluted vinegar into a spray bottle.
2. Spray on affected areas.
3. Use a brush to clean the tree.
4. Re-spray the vinegar on the surface and leave for an hour.
5. Wipe with a cloth, rubbing liquid.
6. In conclusion, wipe with a damp cloth.

Method 2

Perfectly copes with fungus and its spores hydrogen peroxide. It has antiviral, antibacterial and antiseptic effects and is absolutely safe for humans. Remove the mold from the tree using it as follows:

1. Fill the required area with 3% peroxide solution.
2. Leave it for 10 minutes.
3. Walk on the mold with a brush, removing all traces of its life.
4. Use a damp cloth to bring the appearance of your woodwork to perfection.

Note: Before applying peroxide, test its effect on a small area of ​​the tree to avoid discoloration. To improve the result, combine vinegar and hydrogen peroxide. This union will not leave a mold for a single chance of survival.

Method 3

The drill has proven itself in the fight against mold. It does not release hazardous substances for humans. Used as a herbicide, fungicide and when mixed with water, it damages the fungus. When using a borax, follow this step-by-step instruction:

1. Armed with a vacuum cleaner with a fine filter and treat the available mold. This will prevent the spores from entering the air during cleaning.
2. Prepare the solution: for 2 liters of water 1 st.borax.
3. Use a hard brush and mortar to treat the fungus.
4. Remove excess moisture with a dry cloth.

Note: It is not necessary to flush the solution, as remaining on the surface of the tree it should prevent the development of new mold.

Method 4

It is popular as a safe and natural cleaner against mold, baking soda. Besides the fungus itself from the tree, soda removes its odor, since it is a deodorant. Due to the property of moisture absorption, such a remedy prevents the repeated appearance of the fungus. It is applied as follows:

1. Dampen a piece of cloth with water.
2. Soak it wet in soda.
3. Wipe the moldy place.
4. Remove the remnants of the product and sprinkle with clean soda again to prevent re-emergence.

Method 5

Pine and tea tree oil are the most effective natural remedies against mold. They have an antifungal and antibacterial effect, so they are great for solving the problem of how to remove mold from a tree. One disadvantage is that they cost a lot, but a small amount is needed to use them.

Applied as follows:

1. Fill the sprayer 1 st.water and 1 tsp.any oil.
2. Spray to the surface and leave.

Note: As the oil does not evaporate for a long time, its action will also be prolonged. Exactly the same effect on the fungus has an extract of grapefruit bones. The way of application, like in oils, the only difference is that the extract has no odor.

to the contents ↑

How to remove the fungus from the tree?

There are two other ways to solve the problem of mold development. Before use, carefully read the instructions for their use.

Solution 1

Olive and glue are unexpected helpers in the fight against mold, but they are quite capable of coping with it. It works like this:

1. Strip the lesion with a parasite.
2. Dispose of the scraped material.
3. Apply glue or linseed oil to the surface.
4. Leave to dry.

Solution 2

Ammonium alcohol, as affected by mold, is identical to bleach. It is suitable only for non-porous wooden surfaces and is used as follows:

1. In equal quantities, mix ammonia and water.
2. Spray, by spray, onto the affected area.
3. Leave to work for 5-6 hours.
4. Strip the mold with a metal brush or special tool.
5. Rinse the remains of the fungus and the remedies.

Note: never mix or use ammonia with bleach. When mixed, these drugs emit harmful toxic gas!

As you can see, removing mildew from a tree and saving your home is not so difficult. The main thing is to detect the fungal lesion zone in a timely manner and to competently influence it. We hope that our advice has helped in this.