Metal washing

Kitchen is one of the most important rooms in every home. Doing repairs in the kitchen, you need to think over all the details, and then it will become comfortable, functional, cozy. An important role is played by a kitchen sink. Today it is made of metal, ceramics, natural and artificial stone. After reading our article, you will find out all about what metal washing can be used in different kitchens, what are its pluses and minuses, how difficult will the installation of the sink and care for it.

to the table of contents ↑

Metal sinks for the kitchen

Stainless steel sink is practical in use and very economical at a price. Manufacturers today offer a huge selection of diverse designs, shapes. Therefore, the question of how to choose a metal sink for the kitchen is quite natural. First of all, let's figure out what material metal washes are made of.

Material

Most manufacturers use chrome-nickel steel in their manufacture. These two metals perform the function of protection against corrosion, temperature drop, various damages. With their help, the washing gets a spectacular metallic shimmer, thanks to which it fits into any design of the kitchen.

Important! The first thing you need to pay attention to is the composition. The percentage of the mass fraction of chromium should be 18%, nickel 10%.It is chrome that will protect your car wash from corrosion, and will increase strength.

The surface of the sink can be:

• glossy;
• matt;
• smooth;
• with antigraphics - in appearance, the texture resembles a linen cloth;
• with engraved pattern.

Important! On the sinks with engraving and antigraphic, not so much noticeable water stains and minor scratches. But to remove dirt and plaque will need to make more effort. Also on the matte surface, water stains and minor scratches are less visible than on the glossy surface.

Types of metal sinks

The types of sinks can be divided into stamped and welded.

Stamped

Stamped - produced from a single sheet of steel. Therefore, there are no seams on them.

Pros of this type:

• easy to manufacture;
• is a small price.

Cons:

• the depth of the bowl is not large - from 15 cm to 17 cm, which for many is not very uncomfortable;
• uneven wall thickness over the entire surface.

Important! The thickness of the quality wall in any metal shell should not be less than 0.8 mm.

Welded

Welded - the base and the bowl are made separately, then welded, after - polished and polished.

Pros:

• huge choice in depth and shape of sink;
• uniform thickness of metal on the walls and in the bowl.

Cons:

• price is more expensive;
• a low-quality welding seam can lead to leaks.

Important! Choose a manufacturer that has been working in the market for many years and has good customer feedback.

to the contents ↑

Advantages of

Let's consider in detail all the advantages and disadvantages with which the stainless steel sink differs.

Advantages:

• Resistance to temperature drop.
• Not afraid of corrosion.
• Appearance - conformity to fashionable currents does not pass with years if the color of a table-top and furniture is correctly picked up.
• Does not change color, even after many years.
• It's easy to change and install elsewhere.
• Easy to maintain and functional.

Disadvantages:

• The thickness of the walls and bowl can be very thin and quickly deformed. Pay special attention to this parameter.
• There is no special coating on the sink that protects against rust. If the alloy is of poor quality, corrosion will certainly appear.
• Very noisy when used - this drawback can be slightly reduced by placing a rubber gasket under the bowl from below.

to the contents ↑

Types of installation of kitchen sinks

According to the type of installation, the metal sink can be:

• Overhead - it is applied to the cabinet or cabinet, thus replacing the table top.

Important! The installation does not require special knowledge and skills. Place the sink at a height so that there will be no problems when cleaning the clogged siphon.

• Mortise iron sink - in the beginning in its place put a solid table-top, and then already in size cut out the place under the sink. Then the bowl is installed, on the back side is pressed by brackets or clamps and tightened tightly with bolts.

Important! On how tight the sink will be to the countertop, the penetration of water beyond the sink depends.

to the table of contents ↑

How to buy a high-quality kitchen sink?

You can buy a high-quality car wash by reading all our tips.

Tip 1

Buy a sink from a reputable, well-known manufacturer. In branded stores, you can avoid a substandard counterfeit. Read the reviews of other buyers.

Important! The most popular manufacturers, according to a survey of buyers, are such brands: Franke, Kohler, Schock, Reginox, Elleci, Plados, Blanco, Eisinger, Stala.

Tip 2

Bring a magnet with you. It will come in handy to you to check the quality of the metal. Attach the magnet to the sink wall - it should slide. Do not slip - better refrain from buying.

Tip 3

Purchase a car wash with a polished surface. This shell will be easy to clean from plaque and dirt.

Tip 4

Plan ahead what kind of installation you need a sink:

• Waybill - universal, suitable everywhere.
• But the mortise will look good when the other equipment is mortise.

to the contents ↑

Caring for the metal washer

Despite its strength, the iron sink is covered with dirt and grease. In order for your shell to always be clean and shiny, she needs daily care. Following our advice, you will not spend much time and energy on this work.

Means for daily care:

• detergents for cleaning stainless steel surfaces( if not - any dishwashing liquid is suitable);
• sponge for washing dishes and napkins to absorb moisture( suitable for ordinary clean cotton rags).

Important! After finishing washing the dishes, treat the sink with any detergent that you have. Wash off with a sponge and water. Wipe with a moisture absorbing cloth or with a dry, clean rag.

Spotting

Very often on the sink appear darkened spots. Black appears quite often. You can clean it with bleach. Consider step by step instructions:

1. Apply a little bleach to the sponge and rub the stain.
2. Wash.

Important! The place where there was a black spot, after bleach can be a little lighter.

1. Dampen a dry rag in the vinegar and wipe the entire sink. Leave for 20 min.
2. Wash with a normal dish detergent, wipe with a dry rag

Stainless steel washers are very popular due to their reasonable price, high quality, convenience in use. If you manage to choose a really good model, you will never doubt the correctness of your decision and will be satisfied with the purchase, even after 10-15 years of intensive operation.