The better to paint the ceiling - roller or spray gun?

Any work for which brushes or rollers are used refers to laborious processes. During the repair, you can use a spray gun, which will greatly facilitate and accelerate the work many times. This tool is designed for painting walls and ceilings. It works like a spray gun - a thin, even layer spraying the coloring composition on the desired surface. In this article we will consider, the better to paint the ceiling - a roller or spray gun, and how to achieve the best quality result.

to the contents ↑

What is better - a roller or a spray gun?

People who paint the walls with a paint spray gun with water-based paint note the following advantages over the foam rubber roller:

1. High labor productivity. The speed of work is increased many times.
2. The area to be painted increases many times - there is no need to rearrange the ladders.
3. The applied layer of paint turns out to be thin and even, due to this, the surface painted with a spray gun dries much faster. The stains are removed with a simple piece of foam rubber.
4. The spray gun, which paints the ceiling with water-based paint, leaves no strips and makes the color uniform.
5. There are no hard-to-reach areas for such a device. The paint under the pressure of air becomes like dust, and rushing forward, it paints everything in its path.
6. No leakage occurs if the nebulizer does not stay in one place for long.
7. There is no formation of divorces and streaks - they remain only after work with a roller or brush.
8. The spray gun is designed not only for working with paints, but also for painting the ceiling with white, working with liquid fillers and varnishes.
9. When working with this equipment, the consumption of the coloring matter is significantly reduced, and this saves a large part of the money.
10. Divorces, streaks and streaks are minimized.
11. Any uneven surfaces and ceiling moldings are evenly colored.

to the contents ↑

Choose the best tool by type of work

With the help of a spray gun you can not only whiten the surfaces, but also paint them. Therefore, manufacturers offer us an extensive selection of spray gun models for whitewashing walls and ceiling. The choice of the device most often determines its cost or the brand name of the manufacturer. The second is not always true, because many new companies produce such high-quality products.

Devices of all models have a general principle of operation - the compressor produces compressed air, which under pressure pulverizes the dye. Manufacturers offer us equipment in which paint tanks are located at the top or bottom of the product.

Important! If you are allowed financial opportunities, it is better to choose and purchase a spray gun, which operates from an electrical network of alternating current of 220 volts. Pneumatic spray guns are suitable for both professionals and dilettant painters.

Many people are interested in the question, the better to paint the ceiling - spray gun or roller, brush or use another painting tool?

• Of course, if a person has no work experience, it is better to use a foam rubber roller. A brush will not work for him. He will only spoil it.
• But if as a test to work a little spray, then the ceiling will get a smooth surface and an attractive appearance.
• If you plan to paint a large surface area, and you need to do it quickly, a roller or an airbrush is better.
• If a small surface is to be painted - we arm ourselves with a roller or brush.
• Apply an artistic design only with a brush.

Important! The most simple in operation and cheap are hand guns. They are not equipped with electric compressors, and the air that is supplied by a conventional pump gets into the tank and contracts there. In this way, compressed air intended for spraying paint is created.

Using a mechanical spray gun to paint the walls and whitewash the ceiling, you can treat 200 m2 of surface per hour. Professionals spend this amount of work twice as fast.

to the contents ↑

How to paint the ceiling with a spray gun?

If in the question, the better the paint ceiling - roller or spray gun, you preferred the second type of tool, while working, follow the following recommendations for its use:

• Keep the device at right angles to the surface to be painted.
• To adjust the jet before first use, direct the nozzle to an unnecessary surface.
• At first, the spray gun will throw out too much colorant, and therefore it is necessary to wait until the paint is sprayed evenly.
• Mentally divide the ceiling into small areas that are removed from the master by the length of the hand.
• First paint the markings with longitudinal and then lateral movements.
• The optimum distance from the nozzle to the surface to be painted is 40 cm.
• For the quality painting or whitening of any surface, it is necessary to apply three layers of the substance, each of which must dry after application.
• When you are painting the surface, you need to keep a foam rubber or dry cloth with you in order to remove possible stains in time.

Important! The best time to start such work is a summer morning in sunny weather, then it will be possible to apply a second coat of paint in the evening of the same day.

In this article, we talked about the features of special equipment for painting walls and ceilings. We hope that this information will help you to decide, the better to paint the walls - a roller or spray gun.