How to clean the kettle from the stainless steel outside

Stainless steel kettles - ordinary or electric, are quite common in modern kitchens, but have a clear drawback: their surface is very quickly contaminated. And if much is written about the methods of descaling, then often even experienced housewives the question arises: how to clean the kettle from stainless steel from the outside? We offer you several methods of cleaning, the application of which will be discussed in this article.

to the contents ↑

How to clean the kettle from stainless steel?

Depending on the chosen cleaning method, you may need such tools:

• baking soda;
• 9% vinegar solution;
• toothpaste;
• "Cif" for stainless steel surfaces;
• "Cillit Bang";
• "Amway" for ovens or metal surfaces;
• "Shumanit";
• Master Shine;
• "Mr. Chister";
• melamine sponge.

Required is the use of equipment, such as:

• bowl or container;
• kitchen sponge;
• old toothbrush;
• towel;
• clean flannel fabric.

to the contents ↑

How to clean the kettle from the outside?

There are several solutions than cleaning the kettle from stainless steel. Just choose the one that suits you best.

Method 1

The easiest method to clean the kettle from the outside is to use ordinary soda:

1. Heat the kettle.
2. Place on the table or in the sink.
3. Take baking soda.
4. Apply it to a damp sponge.
5. Gently wipe the surface.
6. After cleaning, wash inside and outside with a warm, then - with cold water.

Important! It is recommended to heat the device, because thanks to the high temperature, you can clean out the plaque that appeared from the outside faster. However, be careful when contacting a hot object so as not to burn yourself. And remember that soda is an abrasive, so you should act as carefully and do not rub hard to scratch the surface.

Method 2

You can use soda in another way to clean a normal( non-electric!) Kettle from fat:

1. Collect a large container of warm water.
2. Dissolve in it soda at the rate of 1 tbsp.for 1 liter of water
3. Put your stainless steel cookware into the bowl.
4. Place on the gas.
5. Boil for 30 minutes.
6. Allow the water to cool down.
7. Use a sponge to remove the debris.
8. Rinse under running water.
9. Wipe dry.

Important! To achieve the best result in water for boiling, you can add 1-2 tsp.means for washing dishes.

Method 3

You can also clean the kettle from the outside if you use a solution of soda and vinegar for boiling:

1. Pour 3 tbsp into a large container.soda.
2. Add 3 tbsp.vinegar.
3. Stir.
4. Place the kettle in the container.
5. Put on the fire.
6. Boil for 4-5 minutes.
7. Wait for the liquid to cool.
8. Drain and rinse the kettle with a sponge under running water.
9. Dry with a towel.

Important! Be sure to choose the capacity in which your device will fit entirely. If it is a rather big size, the amount of soda and vinegar should be increased 2-3 times, so that the liquid for boiling was enough.

Method 4

Applying toothpaste will also help resolve the issue of how to clean the kettle from stainless steel from the outside:

1. Take a tube of toothpaste.
2. Squeeze a small amount of it onto an old toothbrush or on the hard side of a kitchen sponge.
3. Gently wipe the surface from the outside.
4. Wash warm, then with cold running water.
5. Polish to shine with a soft cloth or a towel.

Important! Do not use a whitening toothpaste for cleaning, since it contains large enough abrasive particles that can damage the surface. For the same reason, do not rub the kettle, the toothbrush should be with a relatively soft bristle. Stable contamination before cleaning it is desirable to soften beforehand.

Method 5

If you are not an opponent of household chemicals, you can effectively clean the kettle from fat special cleaning products - "Cif", "Cillit", "Shumanit."Use them this way:

1. Take the selected product.
2. Read the instructions for use carefully.
3. Wear rubber gloves.
4. Apply the required amount to the surface of the kettle.
5. Leave for the time specified in the instructions.
6. Clean the outside with a sponge.
7. Rinse several times in warm and cold water.
8. Wipe dry.

Important! When working with chemicals, remember that they are toxic and can harm the skin, so take the necessary precautions, use gloves, and in the case of "Schumann" - also a respirator. This remedy is very effective and literally dissolves fat and plaque, but has a strong concentration and a very sharp odor, therefore, it is simply necessary to protect the hands and the respiratory tract from its effects. To solve the problem, than to clean the kettle from stainless steel, you can also use a relatively new tool - melamine sponges, with which you can not only remove the plaque, but also polish the kettle to shine.

to the contents ↑

Useful advices

• Regularly clean the surface of the kettle of grease, debris and dirt. Remember that with old stains to cope is much more difficult.
• Always choose at the beginning the most gentle cleaning methods, with the help of safe improvised tools. Only in case if it was not possible to cope with pollution in this way, use household chemical products.
• When working with special cleaning agents, take precautions, do not exceed the dosage specified in the instructions, use protective gloves and a respirator.
• If the family has individuals prone to allergic reactions, refuse to use cleaning products containing chemicals.

We hope that the tips given in this article about how to clean the kettle from stainless steel from the outside, will be useful to you, help you effectively cope with fat and impurities, and also extend the life of your kettle.