Than to wash plastic windows and window sills at home to prevent divorces

Modern plastic windows are characterized by high functionality, attractiveness and ergonomics. If you follow the rules of care for the devices, you can enjoy their properties for many years without resorting to cosmetic repairs and updating the

Euphoria from replacing old window frames with stylish and comfortable double-glazed windows after a while gives way to excitement. Than to wash plastic windows not to shorten their service life, but to receive thus the necessary result? Some owners believe that it will be correct, if you do not remove the protective film longer from the glass surface, you can delay the need for processing.

In fact, this manipulation must be carried out immediately, otherwise dust will start to clog under the protective coating. Adhering to the adhesive layer, it will cause the formation of persistent contaminants, which will bring a lot of trouble.

Features of washing the plastic windows

The first time it is recommended to wash the plastic windows within a week after installing them. In this case, special attention should be paid to the selection of tools and detergents.

1. The use of scrapers or rigid jaws is not allowed. From powders and solvents also have to be abandoned, they can damage the surface of frames or scratch the glass. Chemicals that hit the seal, corrode the material, which leads to depressurization of the window and the need for repair.
2. Glasses are best cleaned with specialized products. If this remedy is not available for some reason, you should try a homemade soap solution or a dishwashing product.
3. The optimal tool is a soft cloth made of dense weaving. After it there are no scratches and divorces.

In order not to rack your brains over how to wash off plastic windows covered with stubborn stains, manipulation should be carried out at least twice a year, at the end of summer and in spring. The approach itself is very simple and practically no different from the techniques used decades ago. First, the surface of the frames must be cleaned of dirt and dust, only after that you can proceed to the surface of the glass.

With a cloth soaked in plain water, we remove the dirt, you can wait until the windows dry. Next, spray the spray and thoroughly rub it until a clean surface is formed. Modern products usually do not leave moisture on the surface, but just in case, you can wipe the glasses with newspapers, carefully dry the area of ​​the frames.

Tip: Many owners have a question than to wash plastic windows to get rid of pesky flies. Here the composition based on vinegar will help. A glass of caustic product is diluted in liter of water. The resulting tool is used to treat frames in the area where they are in contact with the glasses.

To eliminate persistent contaminants, it is not necessary to use poisonous chemicals, which then disappear for a long time at home and are characterized by the appearance of divorces. A good effect is given by potato starch, diluted in warm water( half a teaspoon of powder on a glass of liquid).The product is abundantly applied to the stain, leave for five minutes then it remains to wash the area.

Prevent the appearance of stains on the glass

Despite the abundance of modern tools and appliances, many women still do not know how to clean windows properly, leaving no stains and untreated stains. There are several secrets that can facilitate this process even after the repair:

• Observe a clear sequence. First, the frames are processed, then the windows go to the end and you can clean the window sill at the very end.
• While doing the inner surface of the window, move from top to bottom. To clean the outside of the dirt from right to left. Such a technique will help to correctly determine on which side of the glass the work is done poorly.
• Cleaning is carried out only during the day, with good natural light, otherwise it will be difficult to ascertain the presence of divorces.
• Avoid circular movements, the classic technique of grinding detergents does not completely remove the remains of the soap composition.

A poorly washed window strongly blocks light, adversely affecting vision and mood, so do not delay this procedure after repair, installation of packages or obvious deterioration of visibility.

Processing of plastic window sills

Dust from the street, earth and moisture from flower pots, traces of placed items, and often mold, significantly spoil the appearance of the plastic window sill. There are several options for protecting the surface from stains and dirt, for example, the use of beautiful supports and napkins will prevent unnecessary trouble. If the formation of spots could not be avoided, do not despair. Even at home, you can find or independently prepare a product that can clean and bleach the windowsill.

Than wash the plastic window sill - affordable and effective products:

• Soap solution. Effective when removing fresh spots. You just need to moisten the sponge in the composition and carefully rub the problem area. Increased intensity of solutions differ, for the preparation of which a dishwashing detergent was used, but it will have to be washed off for a very long time.
• Cleaning Powder. It is recommended to clean the laminated surfaces with it. As a tool, a soft sponge or a cut of cotton fabric will do.
• To clean the gap under the frame, you need to take a toothbrush. After manipulation of this zone, it is recommended to go through a solution with vinegar, otherwise the smell of soap, which is very difficult to wash, will attract insects.
• Do not abandon the specialized tools used to clean surfaces in the kitchen or bathroom. They will help to bleach the windowsill after repair or heavy pollution( grease, soot, mold, yellowness from water).Only apply them correctly, acting strictly according to the instructions.

Many people wash the windowsill only from the top, even if it is heavily soiled after repairs. Ideally, you need to remove all the plugs, sweep away all the dirt with a napkin and only then clean the surface with a detergent composition. Mounting foam, plaster and primer are removed from the frames and sills by abrasives or stiff brushes. Stains covering the glass will have to be treated with solvents.