How to glue thermo-labels on clothes?

To date, all sorts of applications on clothes are very popular. They are decorated with trousers, jackets, T-shirts and other wardrobe items. Moreover, they can be found not only on children's clothes, but also on the adult. Often interesting bright stickers adorn the most unexpected items of the wardrobe, but they can also be used to disguise a stain that could not be removed or a hole that you or your child managed to put in the most prominent place. To buy such details will not be difficult - they are sold in many stores of sewing accessories, clerical departments and supermarkets. You can order your original print in a printing house or do it yourself. Ready-made thermo-stickers can be easily glued onto the fabric. You will only need a sticker and an iron. How to glue thermo-labels on clothing with iron? Let us examine this process in detail.

to the contents ↑

Adhesive thermo-application onto the fabric:

• To begin with, it is necessary to prepare a solid, even surface. It can be an ironing board or table. You can glue on the floor. On the table or floor you need to put a folded several times the fabric.
• Place the product flat, so that it does not have wrinkles or wrinkles.
• Heat the iron, turn off the steaming function.

Important! The temperature of heating the iron depends on the type of fabric to which you glue the picture. We must put the maximum possible temperature.

• Place the application in the marked area with the picture facing down.

Important! The place where you want to paste the picture can be pre-ironed with a hot iron - so the grip with the decorative detail will be better.

• To avoid damaging the fabric, you can put a sheet of paper on top of the thermo-sticker.
• Put the heated iron in place with a sticker, press as hard as possible and hold the iron for 8-15 seconds until the picture is completely pasted.

Important! The hotter the iron, the less time it takes to stick.

• If the size of the picture is larger than the soleplate of the iron, then to glue the thermo-labels on the clothes, it is necessary to press the parts. Be especially attentive to small fragments and edges. They can be treated with a hot iron repeatedly.
• Give the picture a little cool down, but do not wait for complete cooling.
• Carefully remove the paper - do it better while it's still warm.

Important! If the small pieces are not imprinted in the fabric, return the paper to its place and work the iron again.

• If the pattern is evenly printed on the fabric, then - the gluing was successful.
• Iron the place with a sticker on the wrong side.

to the contents ↑

How to patch a hole on a fabric with a thermo-sticker?

You can decorate a hole with a thermo-application, especially for outerwear. If you can stick a sticker on your pants or shirt in the usual way, then in case of damage to the jacket or winter overalls, we need a suitable appliqué and a piece of thin non-woven fabric.

How to glue thermo-labels on outerwear?

1. Place non-woven linens through the torn fabric of the product. The adhesive layer must be on top.
2. Straighten so that there are no bent edges.
3. Iron with a hot iron, carefully combining the edges of the "wound".
4. Put a thermo-sticker on the front side.
5. Iron it also with a hot iron. If you are not sure about the effect of temperature on the fabric, then you can iron through a cheesecloth or a thin rag.
6. Allow to cool, and then check that the appliqué is well adhered.

to the contents ↑

Termonlayki with your own hands

There are several ways how to make a thermo-sticker on your own clothes:

• You can translate a drawing from a package. To do this, you need to cut it out, attach it to the place where the picture should be. From above it should be covered with a piece of parchment. Plain paper does not fit here. You can use special paper for baking. Iron the pattern with a hot iron, if the sticker is not stuck from the first time, repeat the procedure again.
• You can make a fabric thermal application, but for this you need a printer that prints on the fabric. Choose the drawing you like and print it. Cut it, glue it to the fabric with the help of glue web.

to the contents ↑

Useful advices:

• If the base of the sticker is transparent, it is better to iron it through gauze.
• If the sticker has become unsticked after washing, it can be restored using an adhesive spider.
• Things with thermal pictures are best washed in a gentle mode, and do not strongly squeeze.

Now you can not only decorate your things with interesting prints, but also repair defects on the fabric so that no one will guess the reason for the appearance of such a decor. Do not be afraid to experiment with the selection of parts, and how to glue thermo-labels on clothes, you now clearly know.