How to remove scratches from plastic?

click fraud protection
Contents:
  • Than to remove scratches on plastic?
  • Express solution
  • Thorough repair torpedo
  • Melting torpedo
  • Polishing, pencils and gels
  • Useful advices:

The car for many is not only a means for rapid movement around the city and beyond it at any time of the day. For most, this is an indicator of status, and therefore the appearance of the machine should always be on top. But with the time of operation on the torpedo in the cabin inevitably there are defects and the question arises how to remove scratches from the plastic. To restore a solid and stylish look of the cabin and continue to enjoy a comfortable ride, it is not necessary to rush into the nearest service station. It is enough to know what and how to remove scratches from the car's plastic, adhere to the proposed instructions in the most convenient way and allocate a maximum of one hour of time to perform this labor-intensive work.

to the contents ↑

How to remove scratches on plastic?

The means and ways to deal with the damaged surface of the torpedo are quite a lot - from an ordinary lighter to professional paint and varnish products. What exactly can be useful in your case - it's up to you.

When choosing the appropriate option, consider:

  • the cost of the interior parts;
  • currently available budget for repair work;
  • skills in dealing with various repair materials;
  • amount of free time;
  • own neatness.

Important! If you are the owner of an expensive car brand and before you personally did not perform any repair work, it is better not to experiment and immediately buy professional tools in order to remove scratches from the plastic of the car. It is desirable that these drugs are the most simple and convenient to use.

to the contents ↑

Express solution


If the damage is not very deep, but your eyes get blistered and you are not going to wait any longer when you find the time to thoroughly remove them, use the usual lighter right now. Operate neatly and after 15 minutes your salon will look dignified, like a new one.

To do this:

  1. Place the smallest fire on the cigarette lighter.
  2. Warm up the problem area with fire, long without affecting the flame on the plastic.
  3. Wait 10-15 minutes after the procedure without touching the surface - this is the time it takes to weld the seams of the scratches and polymerize the material.
  4. Evaluate the result - the defects should disappear.

Important! Please note, if you warm up the material for too long, whitish stains may form after re-solidification, which will look even less aesthetic than scratches. Therefore, operate the flame in passing, literally seconds, moving the hand back and forth along the problem area.

to the contents ↑

Thorough repair of the torpedo

In case when you do not have a shower for experiments and want to do everything for sure, use this method to remove scratches from plastic.

Sequence of actions will look like this:

  1. Carry out a thorough cleaning of the torpedo - remove removable parts from it, remove the paintwork in a problem location.
  2. Wash this interior element.
  3. Degrease entire surface with acetone or alcohol.
  4. To level the surface, walk through the material with fine-grained sandpaper. For this purpose, the grinder is also suitable, if you know how to use it and you have it with you.
  5. Again thoroughly rinse the surface of the torpedo and degrease it.
  6. Take an aerosol primer of the right color.
  7. Apply it evenly to the surface.
  8. Make a pause to allow the mortar to seize.
  9. Spray another agent on the same surface to form a monolithic second layer. Be sure not to create any streaks and the surface is perfectly smooth.
  10. Wait for the time specified on the can for the mixture to solidify.
  11. Polish the material.
  12. Choose a paint suitable for the color of the torpedo and car interior paint.
  13. Apply it to the desired surface.
  14. Wait until it is completely dry.
  15. Make sure that the interior looks attractive and no more problematic places are observed.

Important! This method is best used to update the entire surface of the torpedo, rather than its individual sections. Professional craftsmen can make a small scratch area, even deep enough, in this way. But in the absence of special skills and experience, it is unlikely to make coverage uniform at home. But to clean the entire part and re-coat it with paint before obtaining an even coating - it's not difficult.

to content ↑

Melting torpedo

An ordinary lighter is suitable in case you need to remove scratches on very small plastic. If the depth is quite impressive, and the defect length also differs in size, it is also possible to apply melting technology. But for this purpose, a special tool - a construction hair dryer - is more suitable.

The essence of the technology is a similar effect on the material as in the first method, but the sequence of actions will be different.

Instruction:

  1. Carefully clean all debris and dirt from the repaired interior of the plastic.
  2. Sand the problem area with sandpaper.
  3. Remove dust with a damp cloth.
  4. Degrease the surface.
  5. Turn on the building hair dryer, pre-setting the temperature mode to 300 C.
  6. Use warm air, moving the jet along the scratches line.
  7. Do not hold your arm long in one place, even if the depth of the crack is not the same.
  8. Leave material for polymerization and jointing of the joint.
  9. Prime in 2 coats and apply a suitable shade.

Important! It is this technology that is used in profile SRTs in order to remove large scratches on the car's plastic. But when you connect professionals, you have to pay money for their services. If you have a construction hair dryer and all other tools and materials for self-repair, and you have similar experience, act boldly on the proposed scheme and the problem will be eliminated.

to the table of contents ↑

Polishing, pencils and gels

The automotive cosmetics market today offers a wide range of all possible means for removing scratches from plastic. These are gels, polishes, pencils.

Important! The only thing you need to know and understand, these tools are only suitable for the restoration of plastic coatings with minor damage to it. Deep cuts, these tools do not zadekoriruyut.

Application of any of these tools is very primitive, it is enough only:

  • to remove dirt from the damaged place;
  • apply the repair mass along the defect line;
  • rub it with a sponge;
  • polish with a soft, lint-free cloth;
  • Wait for the drying agent to remove the scratches from the plastic.

Important! When choosing a manufacturer, consider the degree of its reliability, so as not to spoil the appearance of the torpedo or plastic parts of the cabin. Such brands as "Repair", "Displex" have proved to be good.

Another nuance is the shade of the tool for removing scratches from the car's plastic. The mass can be colorless, which is quite suitable for restoration of the smallest damages. If the scratch is sufficiently noticeable on the surface - select carefully the tone of the repair mixture to match the existing torpedo color.

to the contents ↑

Useful advices:

  1. Use aggressive solvents for degreasing, as well as mechanical tools, always use personal protective equipment - gloves, goggles and even a respirator. So you protect your skin and mucous membranes from damage with direct physical effects or with the allocation of corrosive fumes, harmful to human health.
  2. Use any tool to remove scratches from the car's plastic only in a well-ventilated area, even better - perform maintenance work outdoors.
  3. Keep animals and children out of the work area.
  4. If your car belongs to the category of expensive cars, better still contact the service center. Otherwise - in case of unsuccessful experience of personal repair, the purchase of new parts can pour into you a substantial amount, much higher than the price of repair to remove scratches from plastic.

With all the information on how to remove scratches, as well as suitable tools and repair skills, you can fully cope with the task of restoring the cabin of your car. If, even in the absence of prior experience, you decided to try different methods yourself, act extremely carefully and slowly. In this case, for sure you will succeed at a decent level, and traveling in a renovated beautiful car will be doubly more pleasant.