The best construction pneumatic guns by customer feedback

Contents:

Which pneumatic gun to choose

The qualitative tool and experience of the master is a pledgegood result of future work at the construction site. The first is provided by many companies, whose specialization are tools and devices for repair and installation.

Among the manufacturers of pistols operating from the compressor and used in construction, the following are distinguished:

1. Matrix

2. Miol

3. Forte

4. Makita

5. Intertool

The German brand Matrix has many offices in differentcountries. The quality of the products is constantly monitored in the laboratories, and the design and usability of the molds are constantly being improved. Manual pneumatic guns from this company are often used in finishing works of well-known contractors.

The Miol company dates back to 1991, and today it has established offices in Russia, Shanghai, Belarus, Ukraine and Moldova. Although the slogan of the company is "striving for excellence", the manufacturer tries to keep the available cost of the products.

Intertool is widely known in the CIS countries, since it has more than 4000 products, including pneumatic guns for the rack. The development team constantly checks in several stages each new model, so that there is no doubt about its reliability and efficiency.

The Asian market has represented Makita for more than 100 years, with about 1000 items in its arsenal. Its factories are located not only in the East, but also in Germany, England and Romania.

The best pneumatic guns for nails

When fixing wooden elements of a ceiling or a parquet, in the laying of a lining or the construction of a temporary fence, speed is important. From getting each individual nail and hitting it with a hammer, a pistol with automatic nailing and driving them with pressure from the compressor gets rid of. Here are the best representatives of this group of tools on the feedback of owners.

4PRO CN55 - for a large volume of work

This model stands out for its spacious round drum for nails. The straight oval handle has a rubber interlayer and holds well in the hand. The trigger is conveniently folded and is calculated by the width of one finger. The overall dimensions of the tool are smaller than those of analogues, so it is convenient for them to reach hard-to-reach places( in the corner of the roof, in the partition).

The length of nails used varies from 32 to 55 mm. This is suitable for both piling up pallets, and for assembling a permanent fence. The weight of the gun is 2.88 kg, it loads the arm, and breaks are required. But the capacity of the store reaches 400 pieces, which saves you from frequent recharges and inconveniences while working at height. The outlet is suitable for nails with a diameter of 2.1 to 2.5 mm. To fully work, the compressor pressure is required from 4 to 7 bar.

Pluses:

• large store;
• compact design dimensions;
• low working pressure;
• wide range of length of used nails;
• rubberized handle;
• scale with centimeters and inches;
• quick filling into the drum;
• powerful impact.

Disadvantages:

• heavy;
• expensive.

Makita AF505 - to work all day

The Japanese pneumatic gun has very light weight compared to other models, which is convenient for working throughout the day and performing operations at altitude. The weight of the tool is only 1.45 kg. The design has a straight handle, ending with a mouthpiece for connecting the compressor hoses. The store is made in a rectangular shape and is designed for the length of nails from 15 to 50 mm. But its capacity is not too high and is 100 pcs. The device is able to function and with stilettos.

For normal operation, a pressure of 4 bar is required. The hull design is balanced and not outweighed. The protective mechanism provides for the activation of a nail shot only when there is an end stop. This prevents a blow when the trigger is accidentally pressed. On the model it is possible to regulate the depth of nailing. The exhaust air flow through the channels is diverted to the side, and not to the face of the user.

Pluses:

• easy;
• good balancing;
• is able to work with small nails;
• protective mechanism of operation in the presence of an abutment;
• affordable price;
• there is no misfire.

Disadvantages:

• small shop;
• does not work on low-power compressors.

Matrix 20-50 57410 - for the house and for workings

This German construction tool is distinguished by its simplicity and compactness. The model has a minimum set of necessary mechanisms and devices, as well as an ergonomic design. The store is designed for 100 pcs of studs or nails with a hat. The trigger is quite wide and convenient for frequent descent. The clip is additionally fixed to the bottom edge of the handle. The cross section in the outlet allows the use of consumables with a diameter of 1-1.25 mm.

The name immediately indicates the length of the nails from 20 to 50 mm. The case is made entirely of metal plates, so it is reliable in the construction of harsh operating conditions. But the developers were able to keep a small weight of the instrument within 1.2 kg. The maximum pressure should not exceed 8 bar. The gun is convenient for fixing slate sheets, plating wooden structures with roll materials and repairing furniture.

Advantages:

• affordable price;
• is very light;
• reliable housing;
• high speed of operation;
• is quiet;
• is compact.

Disadvantages:

• small shop;
• only works with quality consumables( cheap nails bend).

The best pneumatic blowers for blowdown

In the finishing work, you must carefully remove dust and debris before applying the next layer of putty or paint. It is especially important to use this in filling slots or creating textural elements. Here, pistols and compressors are used, which blow all the excess from the surfaces over a large area, allowing you to continue the finish. Here are the best of these models from reviews.

Forte AG-16 - simplicity and accessibility

This construction gun will quickly blow off debris and small particles of materials from walls, ledges, cornices or floors. After it is easier to accurately try on the plinth or continue finishing. The model is simple design, has a straight handle and a trigger with a length of two fingers. There is a loop for fastening the instrument to the wall. The conical spout increases the air velocity at the outlet and correctly directs the flow.

The tool is operated from the compressor pressure of 1-8 bar, which is regulated by a valve and a pressure gauge. The total weight of a pneumatic gun is only 0,7 kg. The housing and channels are hermetically sealed and there is no etching during operation. The design of the instrument is reliable and it is not afraid of falling. The button and spout can be detached by twisting from a thread for cleaning.

Advantages:

• cheap;
• easy;
• strong;
• does not allow air to pass through the connections;
• compatibility with compressors from other companies;The
• supports high-pressure operation.

Disadvantages:

• simple design;
• short spout;The
• loop for hanging is pretty flaky.

Fubag DGL 170/4 - for semi-professional use of

Such a tool immediately stands out for the quality of the assembly. The body is poured from aluminum, which makes it both lightweight and durable. The weight of the design is only 200 g. To reduce weight, the developers created a void in the handle, which turned out to be voluminous, but not heavy. The pneumatic pistol features an elongated spout in the form of a narrow tube, which allows to blow off debris not only from flat surfaces, but also to reach hard-to-reach places.

The handle is placed 45 degrees relative to the trunk, which facilitates the position of the wrist when working in the horizontal direction. For one minute the device is able to pass through itself 170 liters of air, which makes it a professional tool designed for large areas. That it worked fully enough 4 bar of pressure. From the body you can detach the long spout, the start button and the mouthpiece for the hose. This allows you to clean internal moves.

Advantages:

• aluminum body;
• long narrow spout;
• high throughput;
• simple maintenance;
• long-term work;
• is very light;
• convenient and volumetric handle.

Disadvantages:

• no mounting loop;
• trigger far from the handle.

Metabo BP 200 - for true professionals

This model is positioned as a true professional tool. The price of the device is confirmed. The design of the gun differs in its original design with a straight handle and a stop at the end. The trigger is made for the entire length of the handle and can be pressed with all four fingers. The top is provided with a hinge for hanging the tool. For a minute the tool is able to pass through itself up to 350 liters of air.

There is a hook above the hammer to attach the gun to the protruding edge of the surface. The spout turned out to be a curved shape. With respect to the handle it is deployed at 120 degrees, and it is very convenient to work at the shoulder level, since it does not overload your hands. The tip of the spout is provided with a rubber detachable nozzle, which prevents the metal edges from scratching the treated surfaces. But if you remove the tip, you will get a narrow tube to purge the cracks.

Advantages:

• many elements for hanging;
• ergonomic design;
• passes 350 liters;
• weight 140 g;
• work from 3 bar;
• rubber edge of spout;
• curved body shape.

Disadvantages:

• is much more expensive than its counterparts;
• if you pull the trigger not with all your fingers, then the rest will pinch.

The best pneumatic guns for sandblasting

To clean the surface not only from debris, but also from rust or old paint, there is not enough air jet. In such cases solid granules are added to it. It can be sand or a special mixture. It abrasives the surface at a high speed, making it clean and shiny. Here are the best pneumatic pistols from user reviews for this type of activity.

Intertool PT-0705 - for infrequent applications

For short works, an inexpensive model of a pistol with a tank on the front under the hull will do. The capacity of the tank is 1 liter. The material of the container under the sand is steel. The body of the gun itself is made of composite. The spout has a threaded connection to the barrel. The handle provides a convenient cutout for the crushed trigger and widening part for gripping. Above, on the trunk, there is a hook for hanging the instrument.

The machine operates with quartz sand, pre-washed, or with a magazine abrasive mixture. To start the jet, a pressure of 8 bar is required. The air consumption is 400 l / min. To ensure the transfer of the required volume of air, a hose with a diameter of 10 mm is needed. The nozzle supports the patency of granules up to 6 mm in diameter.

Pluses:

• good price;
• can use river sand;
• metal container for pellets.

Disadvantages:

• short spout;
• slowly cleans rust;
• tank interferes with the manipulation of the gun;
• works only at high pressure;
• should be carefully sifted and dried sand.

Forte SBG-586P - good for frequent repairs

This air gun has a casing designed for long-term cleaning work. The sand is delivered to the front of the barrel by a separate hose, which is immersed in a sack or bucket with granules by means of an additional nozzle with a handle. To qualitatively clean the surface, another nozzle with a smaller diameter is provided.

The machine only works from 8 bar of pressure. The total weight of the gun is 800 g. The diameter of the main nozzle is 6 mm. The air supply is fed through the ¼-piece fitting fixed in the handle. On the joint of the barrel and handle there is a large diameter loop for hanging the tool. In the new model, a lot of oil for transportation, which should be removed before use. The model spends the sand in the bucket calculation in 10 minutes.

Advantages:

• additional nozzle included;
• is light;
• quickly cleans rust;
• two nozzles are enough to handle more than 20 small parts;
• enough to sift the sand through a sieve;
• can work on soda.

Disadvantages:

• short hose;
• quickly wears out the injector;
• needs a powerful compressor;
• no hose clamp for nozzle hoses under the sand fence.

Intertool PT-0706 - for all surfaces

The tool is suitable for removing the old paint layer from wood, metal, concrete. The pressure is sufficient to clean the surface of plaster and dried mud. Corrosion from metal structures removes to shine, leaving the condition, suitable immediately for painting. For one minute the device is able to pass through itself 420 liters of air, pulling the sand.

The gun is unpretentious to the mixture, and can work with soda, dried sand, and even slightly damp. But an integral requirement for this is a compressor designed to produce up to 600 l / min of air. Two metal and ceramic nozzles are included. The flow of bulk material is made using a meter hose from the bucket. It is convenient for them to clean hard-to-reach places, where not to get a bullet.

Advantages:

• powerful;
• convenient housing;
• two nozzles included;
• unpretentious to loose mixture;
• quickly cleans the surface.

Disadvantages:

• short hose;
• nozzle is quickly erased;The
• may stop responding to the air supply valve;The
• hose is very rough and does not bend well.

The best pneumatic guns for liquid substances

During repair work, it may be necessary to apply a cleaning solution to a large area of ​​the floor, windows or painted walls. It is also necessary to treat metal structures with an anti-corrosion coating. Here we use pneumatic guns with additional tanks, which fill with the right composition. Here are the best types of such tools.

Miol 81-570 - for fast and easy processing

This construction equipment is distinguished for its unpretentiousness and simple operation. They can easily spray the detergent or apply gravitex to metal fire escape ladders or fences on the roof. The case has a classic pistol shape, with a smooth barrel and a bronze nozzle-sprayer. This nozzle is twisted and allows to clean the internal channel. The handle is bulky and has incisions against sliding.

The trigger is designed for all fingers and is convenient for long hold in the pressed position. Under the barrel there is a tube and a threaded fastening for the tank with a liquid agent. Its capacity is 0.5 liters. In the kit there is a small hose from the gun to the compressor. The device operates at a pressure of 6-8 bar. In a minute he is able to pass up to 250 liters of air.

Advantages:

• cheap;
• simple maintenance;
• "eyelet" for suspension;
• easy.

Disadvantages:

• small tank;
• short hose for compressor;
• there is no air regulator;The
• trigger can pinch your finger.

Intertool PT-0704 - for larger volumes

This gun is suitable for more professional applications where large volumes are required. They can spray the liquid primer to 7000 square meters.meters for six hours. The unit has a cylinder capacity of 0.7 liters. To work it is necessary on a pressure indicator in 10 atmospheres. But the gun copes and at lower values. The long barrel allows you to get to the corners and to high points. The hook at the top allows you to quickly hang the tool to free your hands.

The hose from the compressor to the gun is required from 6 to 8 mm in diameter. Adjustment of the supplied volume of liquid is provided through a brass tip with notches for rotation. Can even spray lime, but requires thorough washing after this. Advantages:

• is convenient for White spirit and other washing liquids;
• operates at different pressures;
• spray control in the tip;
• can work with a liquid primer;
• long barrel;
• rugged housing;
• large coverage area in a short time;
• inexpensive.

Disadvantages:

• serves batching agents batchwise;
• it is inconvenient to wind the finger between the trigger and the cylinder.

Werk AUG-14 - affordable and functional

The construction pneumatic gun from the Chinese manufacturer is very similar to the models of other firms, but it has lower cost and more functionality. This tool contains a convenient regulator of the supplied airflow, which is located on the left side of the housing in the form of a wheel. This allows you to set up directly before the machined surface, and not near the compressor. The volume of the liquid is traditionally corrected by turning the nozzle.

The maximum pressure for normal operation should be 5.92 atm. The complete set is supplemented with a nylon hose and a nozzle of 0.45 cm. The main nozzle is 5 mm in diameter.

Pluses:

• air adjustment;
• liquid adjustment;
• nozzle included;
• works with viscous compounds.

Disadvantages:

• trigger holds other fingers;
• no tank included.

Which construction pneumatic gun to buy

For quick repair, several pistols alternately connected to one compressor are useful. They are needed both at the initial stages of work, and in the final stages.

The decision to purchase a specific type of gun depends on the type of future activity:

1. To quickly fix a parquet or hang a fence to the ceiling, install a wooden fence or nail a roll material, you need a 4PRO CN55 or Makita AF505 tool. The first model is necessary for professionals, and the second one will fit for self-repair.

2. To blow off debris at the place of installation of parquet, future painting or gluing, use pistols with cleaning purpose. For personal purposes, you can buy Forte AG-16, and Metabo BP 200 is useful for working with large volumes.

3. Remove old paint from wood or iron stairs with a sandblast model of Intertool PT-0705 or Forte SBG-586P.They will cope with both plaster and withered clay.

4. You can quickly surface or coat metal structures with an anticorrosive mixture using Intertool PT-0704 or Werk AUG-14.