7 best solid fuel boilers according to customer reviews

Now there is a huge amount of solid fuel boilers. First of all, they differ in the type of natural resources they burn. Also modern boilers differ in their design and method of burning fuel. For example, there are solid fuel boilers of long burning, allowing to spend for their maintenance the minimum amount of time. As for the design, here, first of all, attention is drawn to the heat exchanger, which can be made of cast iron, steel or some other materials. In this article we will try to consider boilers of various types. They are similar only one - they all collect on the vastness of the global web positive reviews.

Solid fuel boiler of which firm to buy

Teplodar

The Russian brand "Teplodar" was founded in 1997.To be frightened of its origin it is not necessary, the Russian heating equipment frequently at all does not concede to foreign production. At the same time, domestic machinery does not need to be imported from abroad, due to which its cost is often quite adequate. The assortment of solid fuel boilers "Teplodar" can not be called very wide. But all models correspond not only to Russian, but also to world standards of quality. You can buy them almost in all major cities of our country.

Buderus

It's hard to believe, but the Buderus brand exists since 1731.For a long time it belonged to the German company of the same name. In 2003 this group was absorbed by the Robert Bosch GmbH group. However, the brand continued to exist. Now it is managed by the "Bosch Thermotechnics" division, which has factories in Russia as well. Solid fuel boilers Buderus show themselves from the very best side, serving customers for many years.

Protherm

Protherm was founded in Prague in 1991.Its history began with the production of electric boilers. The founders of the company did not expect a rapid increase in sales, but it happened - Protherm products became known throughout Europe. This allowed the company to increase production rates, as well as expand the range, including going to the steadily growing solid fuel boilers. Now all Protherm products are certified by the European Union, which indicates their highest quality.

Viessmann

About the German company Viessmann at least the edge of the ear heard many fans of winter sports. This brand is actively advertised in competitions in biathlon, ski jumping and cross country skiing. The company was founded in 1917, since then it has not lost its independence for a moment. Almost 8,200 employees provide products of the best quality. Viessmann solid fuel boilers are often able to serve for decades. Their only drawback is the high price - at least in Russian retail.

Wirbel

Wirbel boilers have appeared on our market relatively recently. However, it quickly gained popularity, as the manufacturer relied on a low price tag and ease of use. Wirbel solid fuel boilers usually have a steel heat exchanger. In the company's assortment there are also two-circuit models. In short, the Russian manufacturer is trying to keep up with foreign colleagues, while trying to keep the price at an acceptable level.

Cast iron solid fuel boilers with the best reviews

Protherm Beaver 50 DLO

Designed as if specially for severe Russian conditions a classic solid fuel boiler. If you at least once faced with such products, then you can easily cope not only with the control of the device, but also, perhaps, with its installation. The maximum thermal power of this model is 39 kW, which is an excellent parameter even for a fairly large house. The efficiency is also quite good here - it reaches 90.2%.

This boiler is one-circuit, and its combustion chamber is open. In a word, engineers have tried to make every effort not to complicate life to the owner of their creation. As a fuel, you can use coal or wood. The primary heat exchanger is made of cast iron, which makes it almost eternal. The coolant temperature can reach 85 ° C.It is recommended to keep the water pressure at 3-4 bar.

Pluses:

• Quality cast iron heat exchanger;
• The boiler consists of a manometer and a thermometer;
• Two types of fuel supported;
• Fully non-volatile;
• Simple mechanical control;
• Relatively simple installation;
• High heat output.

Disadvantages:

• The bottom of the boiler gets quite hot;
• Far not the cheapest.

Lamborghini WBL 7

Everybody knows Lamborghini supercars. Some people know that there are tractors under the same brand. But almost none of the Russians do not suspect that the same Italian company also produces solid fuel boilers. Buying a Lamborghini WBL 7 is a good way to boast about a neighbor. And not so much a famous brand, as the capabilities of this device. Its main feature is the possibility of transition from solid fuels to gas or solar oil. This makes the boiler versatile.

The creators have tried to ensure that their product performs its function, if not forever, then for at least three to four decades. To do this, they made the heat exchanger cast iron, and also achieved complete energy independence. Everything is in order here and with efficiency reaching 90%.None of the competitors considered below is not capable of such a boast! The work of the boiler is not audible, even if you are in close proximity - for this you should thank the sound system of soundproofing.

Pluses:

• Produced in Italy;
• Belonging to all known automobile brand;
• Energy independence;
• Firewood is placed in the size of 67 cm;
• Power can be adjusted automatically;
• Simple maintenance;
• Minimum noise level;
• Heat exchanger made of cast iron;
• Possibility to use solar oil or gas.

Disadvantages:

• Not very high power( 29.4 kW when powered by coal);
• High cost.

The best steel solid fuel boilers

Bosch Solid 2000 B SFU 12

Boiler with a respectable appearance. Its heat exchanger is made of steel, in connection with which the weight of the device was not the largest - it does not exceed 155 kg. The boiler is equipped with a pressure gauge and a thermometer, thanks to which the control has become much simpler. Unfortunately, the steel heat exchanger affected the efficiency, which here barely reaches 84%.But Bosch Solid 2000 B SFU 12 is cheaper than cast iron counterparts.

It is recommended to use coal as a fuel here. But you can use and coke, coal or wood briquettes, as well as simple firewood. Simply in case of application of the above types of fuel, the thermal power may not be as large as it would be desirable. It should also be noted that the boiler is non-volatile and uses a mechanical type of control.

Pluses:

• Different types of fuel can be used;
• Mechanical control;
• The temperature of the heating medium can be increased up to 95 ° C;
• Does not depend on the availability of electricity;
• Not the biggest weight;
• Not very high cost;
• There is a thermometer with a manometer.

Disadvantages:

• The maximum heat output is only 13.5 kW;
• Low efficiency.

ZOTA Carbon 20

This model got its name in honor of the coloration of the body part, made in the style of the carbon fiber. As well as the boilers considered above, the device is non-volatile and uses an open combustion chamber. The thermal power varies from 7 to 20 kW, which allows you to put the boiler in the shop and in a small country house. Load here you need coal or coal briquettes - depending on your preferences.

The device is capable of bringing the temperature of the coolant to 95 ° C.To maintain the desired parameter, the heater is used. Mechanical control does not cause any problems, even an elderly person can cope with it. To regret it is possible only about the efficiency, which is 80%.But this is the misfortune of the vast majority of steel models. Some sadness is caused by the 176 kg weight of the boiler - two or even three men will be needed for its installation.

Advantages:

• Withstands water pressure up to 3 bar;
• A very strong temperature increase is possible;
• Simple operation;
• Cool power;
• It does not matter if there is electricity in the house;
• Has a manometer and thermometer;
• Sent a price tag.

Disadvantages:

• Only two types of fuel can be used;
• Very low efficiency.

Best long-burning boiler

STROPUVA S40

If a boiler is purchased for some workshop, and the manager is not going to provide separate personnel for its maintenance, then a special model will be required. For example, a good choice could be the STROPUVA S40.This product belongs to a special class - to boilers of long burning. In its combustion chamber it is possible to load up to 50 kg of firewood. They will burn up to 70 hours - this is how much time to the boiler can not be approached.

It's all right with the device and with the heat output. This parameter reaches 40 kW, which indicates the possibility of heating the premises with a total area of ​​up to 400 m2.In short, this is a great industrial design. You can buy it for an ordinary country house, but in this case you must be a wealthy person - the price of STROPUVA S40 biting. It is interesting that in all other respects the boiler does not stand out - it is a traditional single-circuit model that uses wood and wood briquettes to generate heat. The heat exchanger here is steel, and the combustion chamber is open.

Advantages:

• Very high heat output;
• Relatively small;
• Simple control;
• Fuel burns very long;
• Does not depend on electricity;
• The temperature of the heating medium can reach 95 ° C;
• There is a safety valve.

Disadvantages:

• Only wood is suitable as fuel;
• Efficiency - only 85%;
• The weight reaches 291 kg;
• Scary cost.

The best pyrolysis solid fuel boiler

Buderus Logano S121-2-32

An excellent boiler from a division owned by Bosch. The power of the product reaches an impressive 32 kW.But to achieve this parameter, you have to spend a lot of fuel, as the efficiency is very low here - it is only 78%.Also, it is possible to slightly strain the buyer electronic control, because of which the boiler requires a constant presence of electricity( it is connected to a single-phase network).

The device displays all the most important parameters on a digital display - you can see the temperature and pressure on it. Also, the boiler includes an open type combustion chamber. The heat exchanger is steel, but its weight did not reduce - the total weight of the boiler along with its 150-millimeter chimney reaches 375 kg. To please the buyer the exhaust fan should be - it is present here, and its work is almost not audible.

Advantages:

• High temperature coolant;
• It's easy to understand with management;
• Presence of the exhaust fan;
• Withstands high pressure in the pipes;
• Modern technologies are applied;
• High heat output.

Disadvantages:

• Only fueled by wood;
• Very heavy;
• Extremely low efficiency;
• Hardly the maximum cost;
• Not a nonvolatile one.

Budget solid fuel boiler with the best reviews

EVAN WARMOS TT-25K

This relatively inexpensive boiler is made according to classical principles. It has a single-circuit type, its combustion chamber is open, and the heat exchanger is made of steel. And let you do not mind the low efficiency - partly to save the energy obtained by burning fuel, helps a 2 kW electric heater.

The maximum heat carrier is heated by this boiler to a temperature of 95 ° C.As fuel it is allowed to use peat, coal and, of course, firewood. Depending on the fuel used, the heat output can vary from 8 to 25 kW.Theoretically EVAN WARMOS TT-25K can heat a room with an area of ​​180 m2, which is a very good indicator. One can not but be glad of full energy independence and mechanical control.

Advantages:

• Powerful heater included;
• Withstands a decent water pressure;
• The simplest control;
• Heats very large rooms;
• Costs cheap;
• Does not depend on electricity;
• Different types of fuel;
• Minimum weight( 125 kg);
• It is possible to lay 55-centimeter firewood;
• A manometer and a thermometer are available.

Disadvantages:

• Efficiency - only 75%;
• Fuel burns out quickly enough;
• Not very high reliability.

Which solid fuel boiler to choose

1. In this article we tried to tell you about the most different boilers. All of them are united only by the fact that they are primarily intended for working with solid fuel. You just need to pay attention to other parameters. For example, the heat exchanger material depends on how much fuel will be wasted and the life of the boiler. The volume of the combustion chamber is also a very important parameter, which tells how often it is necessary to approach it to load a new portion of fuel.

2. It is not possible to recommend a specific model for purchase. It all depends on what kind of premises you are going to heat. Take into account even the material from which the structure was created, as well as its dilapidation! In calculation it is necessary to take and natural conditions which happen in your region in the winter.