How to remove lime from the walls

In the process of repair in old apartments and houses, there is often a need to remove the old whitewash. How to remove lime from the walls with minimal effort and time, you will learn from this article.

to the contents ↑

How to remove lime from the ceiling and walls?

Nowadays there are many ways and methods of removing the old whitewash, we will introduce you to the most affordable and effective. The occupation is dusty and you can not do without a certain preparation. For work you will need protective clothing. Prepare in advance:

• safety glasses;
• respirator or gauze dressing;
• work clothes - one that you do not mind spoiling;
• cap and gloves.

When you are sure that you are ready to work, choose the way by which you will decide how to remove lime from the walls. There are three types of approach to work with the old whitewash:

1. Dry.
2. Wet.
3. With the help of paste.

to the contents ↑

Than to remove whitewashing from the walls?

Depending on how you decide to remove lime from the walls, you will need such tools and tools:

• For dry method:
  • spatula or trowel;
  • vacuum cleaner.
• For Wet:
  • brush;
  • spray gun;
  • acetic or soapy solution;
  • Duster;
  • water.
• For work with paste:
  • adhesive for wallpaper;
  • starch or flour;
  • bucket or saucepan for kneading paste.

Decide what inventory you have available, put on protective clothing, and get down to business.

to the contents ↑

How to clean the whitewash from the walls?

If you chose a dry kind of work, then you should know that it is effective with an outdated whitewashing, when it easily lags behind pieces. The lime is removed from the surface mechanically, without the use of liquids. A distinctive feature of this type of work is a lot of dry dust. In this case, in order to choose the right method, how quickly to remove the lime from the ceiling or walls, consider the 2 most popular ways. Give preference to the one that is more convenient in your opinion.

Method No. 1

Means the use of a spatula or trowel. It is as follows:

1. Cover the floor with newspapers or polyethylene.
2. Use the tool to scrape whitewash first in those places where it falls well behind.
3. Subsequently, take up difficult parts, leading the matter through.

Method number 2

In this case, you will help a vacuum cleaner. Dust and dirt will be less. Operate it like this:

1. Put a special nozzle on the tube of your vacuum cleaner in the form of a spatula.
2. Turn on the vacuum cleaner and work the surfaces as indicated in the first method.

to the contents ↑

How to remove whitewash from the ceiling and walls in a wet way?

Wet kind of work is appropriate where the whitewash itself does not depart, or where it is applied with such a thin layer that it simply can not be removed with a spatula. A distinctive feature is a lot of dirt. Lime will practically drain to the floor and walls. Methods of wet processing are somewhat larger than dry ones.

Method # 1

You will need water and a wide brush. It works like this:

1. Prepare warm water and a brush.
2. Wet the brush with water, treat all necessary surfaces.
3. Change water when necessary.
4. If you see that in some places whitewash is pushed by a spatula, remove it. This will speed up the process.

Method # 2

Use the spray gun. Operate in this case by following these instructions:

1. Dampen all lime with warm water from the spray gun.
2. Wait for 20 minutes and moisten again.
3. Use a stiff brush or spatula and remove the whitewash.
4. Re-clean the entire surface to be treated with a washcloth moistened with water.

Method # 3

If you have a vacuum cleaner, this method is for you. In addition to it you will not need anything. It looks like this:

1. Fill the container with water.
2. Turn on the washing mode.

Note: The vacuum cleaner can deteriorate from such a long work, so if it is your new one, give preference to other methods. Water in all cases can be replaced with solutions of vinegar and soap. In both cases, whitewashing will be easier.

to the contents ↑

How else can lime be removed from the walls?

A great innovation is the removal of whitewash with glue. Specialists note that this kind of work creates less dirt and makes it easier to clean ceilings and walls.

To do everything correctly, follow this step-by-step instruction:

1. Spread the adhesive for the wallpaper and let it stand.
2. Take a roller or a large brush and apply a thick, uniform coat of adhesive to the lime.
3. Wait until it dries, and remove the whitewater with a scraper.

Note: The lime will not crumble into small particles and will be easily removed together with the glue.

If you do not have a wallpaper glue at home, then you can weld it yourself. To do this:

1. Heat the water and add starch or flour to it.
2. Stir well and heat until thick.
3. Apply to the whitewash with a brush and remove as glue.

We introduced you to the most common and effective ways to remove whitewash from walls at home. If you adhere to such schemes, then with the old lime you will not have problems and you will be able to complete your repair as soon as possible.