Docking tiles with laminate: all the nuances

Laminate and tile - the two most popular finishing material, which are used universally and in combination. It is in the combination that some problem lies. Tiles are usually laid in places where there is high abrasion and high humidity, and laminate is a comfortable material for living rooms, beautiful and easy to maintain. But what if you need to dock these two coatings?

Read in the article

  • 1 How to connect tiles to a "floating" floor
  • 2 Docking tiles and fixed floor
  • 3 How to arrange the joint between the bathroom and the floor of the corridor
  • 4 Docking with a complex line

How to connect tiles to a "floating" floor

Not everyone understands the term "floating floor", so you need to clarify. This is the name of a topcoat that is not fixed to the base. Such floors include laminate, parquet or an engineering board that is connected by the groove-tenon method.

Since these materials are not fixed in a stationary way on the base, they do not warp, because when the temperature drops, the tree and its derivatives contract and expand.

Joining tiles with laminate
PHOTO: keramos-neva.ru
For joining the "floating" floor with the tiles, a T-shaped docking profile is used. There is enough space for the movement of the side of the "floating" floor, and the crossbar on top hides the gap

Such a profile is selected in the color of the coating or a neutral tone is chosen that will be in harmony with both the laminate and the tiles.

Docking tiles and fixed floor

There is such an option for finishing the floors, when the board or parquet is glued to the base. Or, for example, was selected as the finish line quartz vinyl tile. There are peculiarities in the arrangement of glued floors, but now we are talking about how to join them with tiles. The glued floor is stationary so that the joint can be reduced to a minimum thin line. To arrange the joint, one of three options is used: a cork expansion joint, silicone sealant or a special thin profile.

The most aesthetic option, according to the designers, is the cork expansion joint, almost invisible and in perfect harmony with the traditional design of the floor.
PHOTO: ya-magazin.ru
The most aesthetic option, according to the designers, is the cork expansion joint, almost invisible and in perfect harmony with the traditional design of the floor.

But you can also use a special thin profile - neutral or matched to the color of the coating.

How to arrange the joint between the bathroom and the floor of the corridor

Even if you have not used tiles in the kitchen or in the hallway, 99% of users have them in the bathroom. And here the junction at the exit is complicated by the presence of a door.

It is important to lay the tiles and make the joint so that when the bathroom door is closed, the joint between the different floor coverings is invisible. So this place needs to be thought out in advance, it is better before you put the boxPHOTO: sdelalremont.ru
It is important to lay the tiles and make the joint so that when the bathroom door is closed, the joint between the different floor coverings is invisible. So this place needs to be thought out in advance, it is better before you put the box

It is logical to assume that the bathroom will always have high humidity, so the joint must be sealed. Using a silicone sealant is the surest way to cover the gap between different finishes. It can be matched to the color of tiles or laminate, or at least close to them.

Docking with a complex line

There is a need to connect tiles and laminates not just in a straight line, but with complex bends or a broken line. And the gap does not always turn out to be the same width, especially if you did such a docking yourself. In this case, a special grout will help you out. And the joint is made according to the same principle as the joining of tiles to each other. Only for this method it is extremely important that the materials did not have a height difference.

Half-fill the joint with silicone sealant before grouting.PHOTO: finehomebuilding.com
Half-fill the joint with silicone sealant before grouting.

By the way, among the special materials for such a docking, cork sealant should be noted. It can be applied both as a grout, with a spatula, and through a tube with a narrow nose. In appearance, it is the same as a cork expansion joint, and in its properties - like a silicone sealant.

And a few more tips for combining different types of flooring:

How did you solve this problem? Share your experience in the comments!

Discuss0

At first glance, it seems boring and a collective farm. at a second glance, you begin to notice not ...

Judging by the apartment, we can say with confidence that these are the hateful walls of a lonely woman ...

It’s too much of a problem for you. Dyakuyu! Information bullet cikava, korisna i vchasna. I wish you good health and ...

My father, a notable carpenter in the area, said that a tree should be taken in November then wood ...

I like it very much, well done Julia Baranovskaya.

The title of the article promises accessories for organizing order, but in fact cardboard for rice ...

Brains are felt in everything. Even in the apartment (choice of a house, method of obtaining, footage, oh ...

Smart guy. I did not take a mortgage, but bought it out of a communal apartment, well done. And the 100m did not become ...

The author of the publication is RIGHT!!! They fight with us everywhere and for everything, and for which we are not obliged to pay ...

I would not call all the persons listed by you as descendants of Lenin. They may be called ...

I rarely write SUCH a comment but... Great article! And I really don't know a lot ...

I was also interested in the topic of the article, lavnoe, she calmly talks about the family of V.I.L ...

I completely agree with you. interesting, informative article, it's a pity that I don't know much ...