The best cordless screwdriver rating of 2020 inexpensive models, reviews

How to choose a cordless screwdriver for home - basic technical parameters

The choice of a worthy screwdriver model must be approached as carefully as possible. This tool will do a great job at the right time and in the right place. Disassembling / assembling furniture, unscrewing the dowel, screwing on the baseboard - only a small part of the work in which a screwdriver can help.

When working with drywall, there is no better assistant than a screwdriver.

And if repairs are being carried out in the room, then without a screwdriver it is difficult to even imagine how complicated the repair will be and how long its term will increase. There are several main parameters that you should pay attention to when buying:

• power. It characterizes the performance of the tool as a whole. For household purposes, about 450-700 W is usually enough;
• torque. The characteristic shows what force the device can develop for tightening or unscrewing bolts and screws. The bigger, the better. However, the price for more efficient models will be higher;
• the presence of a reverse. Reverse is a mechanism that allows the chuck to rotate in the opposite direction. Used to unscrew screws and bolts. Almost all modern screwdrivers are equipped with a reverse;
• rotational speed. The spread of this parameter in screwdrivers is quite large. Models with values ​​from 500 to 1400 rpm can be found. Here you need to choose depending on the type of work. In fact, even high-speed screwdriver models are equipped with a speed reduction mechanism;
• general ergonomics. Before buying, it is better to assess the weight, how it fits in your hand, and its design. These parameters are especially important for those who plan to work with the tool constantly, especially at height;
• the presence of an impact mechanism. This ability of the screwdriver, together with the rotation, causes the chuck to oscillate progressively. Such a model can replace a full-fledged hammer drill in some types of work, for example, drilling holes for small diameter dowel-nails;
• battery type. Quite an important parameter, which we will analyze separately, just below in the article.

NOTE!

An average torque of 25-30 Nm allows you to screw a self-tapping screw with a length of about 70 mm into a tree. If the screwdriver will be used for more serious work, it is better to opt for models with a torque of 50 Nm and above.

The main types of screwdrivers

The screwdriver, as a class of hand tools, can be divided into two large groups: mains and cordless. Each of them is aimed at solving its own narrow range of tasks. Although somewhere you can replace one view with another.

Corded screwdrivers

Corded screwdrivers are devices that operate on the mains supply. The work does not need to be interrupted periodically to change the battery, in addition, such models are often of higher power. There is also a type of work in which it is simply impractical to use a cordless screwdriver. This includes drilling holes in viscous materials that require prolonged exposure. However, mains batteries require electricity and extension cords to the work site. Another important point can be considered the inconvenience associated with this - the place of work is limited, and it is difficult to quickly move to a new point.

Cordless screwdrivers

The most important advantage of cordless screwdrivers is their autonomy. They do not require carriers, extension cords and power supply networks to work. All you need is a stationary base to charge the batteries. Their main task is to work in hard-to-reach places and in those cases when it is required to cover a large area in a short time. As an example, laying metal tiles. The main part of the work here is occupied by preparation, sheet cutting and stacking. It takes much less time to tighten the screws. In addition, shingles cover large areas at once, and using a self-contained screwdriver will help increase overall productivity.

In a domestic environment, a screwdriver is indispensable for performing one-time work - unscrew or screw on an interior element, disassemble an electrical appliance, screw a self-tapping screw into the wall. It will be much faster and more convenient than using a corded drill.

Types of batteries - which battery is better for a screwdriver, cons and pros

Separately, it is worth highlighting such an important characteristic as the type of battery. There are three types:

• Ni-Cd - nickel-cadmium;
• Ni-MH - nickel metal hydride;
• Li-Ion - lithium-ion.

Nickel-cadmium are the most canonical for screwdrivers. Their technology has been known for a long time, so this type is the most advanced and inexpensive. The batteries are capable of operating without loss of charge at temperatures down to -20 ° C. Also, one of the advantages is a large resource, that is, nickel-cadmium batteries last longer when used correctly. The most serious of the downsides is the memory effect. That is, charging a battery that is not fully discharged reduces its overall resource. Therefore, you need to work with this type of battery as follows: completely discharged, fully charged. Nickel-metal hydride batteries have a higher capacity relative to Ni-Cd, have practically no memory effect, and are capable of operating at low temperatures. The disadvantages are the higher price and lower overall battery life.

Lithium-ion screwdriver batteries do not have a memory effect, which means they can be charged and discharged at any time. This type is gradually replacing all the others. The batteries are large in capacity and light in weight. At the same time, lithium batteries for screwdrivers do not feel well at low temperatures and are more expensive than other types.

By the way, information about the type of batteries is relevant not only for screwdrivers, but also for other types of wireless technology and electronics.

ATTENTION!

When buying a new screwdriver, pay attention to the presence of an additional battery in the kit. While one is in work, the other is charging. It is very convenient. Not all screwdrivers come with an extra battery.

Leading companies in the production of screwdrivers

For a long time, almost the same brands prevail among screwdrivers. Here is a small list of the most famous names:

• Bosch. The company is engaged not only in the production of screwdrivers, but also in other construction and household appliances. Usually, construction tools are divided by a company into two types: professional and household. It is easy to distinguish them: the first turns blue, the second green. Accordingly, the characteristics of both species are different;
• Makita. The company has long established itself as a manufacturer of reliable and powerful screwdrivers. Excellent ergonomics, long-lasting batteries and long device life;
• Hitachi. Less common in both professional and household spheres. Although the quality of the instrument is on par. True, it is worth noting that there are assemblies from China, the characteristics of which are slightly worse;
• DeWalt. Many are convinced that this is a German brand. Actually the company is from the USA. Accordingly, the name is read according to the rules of the English language - "devolt". It dates back to 1922. Excellent professional equipment with appropriate quality and price;
• Interskol. Domestic brand. Low price and high reliability. The quality of the case is not always pleasing to the eye, however, for domestic needs Interskol screwdrivers are an ideal solution;
• Hilti. This is a professional tool class. It is characterized by high quality and high price. Household use is impractical from time to time.

Rating of inexpensive cordless screwdrivers 2019

Quality matches the price - according to these criteria, we have selected several manufacturers and brands that will help you choose a good screwdriver.

Bort BAB-12-P

Quite a simple model from the little-known German company Bort. However, only the name is from German here, since the products themselves are made in China. But for rare chores around the house - a good budget solution. You can buy it for about 1,500 rubles. True, for this money only one battery will be present in the kit.

Of the main characteristics, one can single out the number of revolutions - 600 per minute, not the weakest torque - 28 Nm, engine brake, reverse and several speeds. The type of battery used is Ni-Cd. The capacity is sufficient for household needs - 1.3 Ah. Voltage - 12V.

Bort BAB-12-P

Interskol DA-12ER-01

12-volt brand ambassador. The number of revolutions is high - 1400 per minute. There are two speed modes - main and reduced. The second helps to screw screws into viscous types of materials, for example, wet wood. Also, this mode can be used for drilling in order to protect the drill from overheating.

Of the special functionality, reverse and electronic overload protection can be distinguished. Additionally, there is a spotlight and a lock on the power button. The battery capacity is 1.5 Ah, which is a good indicator for a household tool. The voltage is 12V and the battery type is lithium-ion. When choosing, it is worth considering that there is only one battery in the kit.

Interskol DA-12ER-01

Bosch PSR 1080 LI 1,3 Ah Case

This screwdriver is suitable for small types of work - disassemble / assemble household appliances, furniture and tighten the self-tapping screw. Accordingly, the characteristics are also less productive. The maximum number of revolutions per minute is 550. The maximum torque is 17 Nm. There is engine braking, which saves the inserted bit and self-tapping screw from damage.

A lithium-ion battery with a capacity of 1.3 Ah is used as a battery. With an operating voltage of 10.8 V, it should be enough for a long time. Of the special nuances, one can note a backlight lamp, a power button lock and a case included in the delivery set. There is only one battery in the standard configuration.

Bosch PSR 1080

Makita HP331DZ

The Makita HP331DZ cordless screwdriver has rather high characteristics, which allow it to be used not only for domestic purposes, but also for some professional cases. It's worth starting with the fact that this tool can drill with chiseling. The maximum number of revolutions per minute is 1700. This speed may take some getting used to. The torque is 30 Nm, which is the leader in this rating. The voltage of the device is 10.8 V. The screwdriver is powered by a battery, which is not included in the kit at all. You will have to buy it separately.

Makita HP331DZ

Kolner KCD 12M

A very simple and inexpensive screwdriver with low performance indicators. The number of revolutions is only 550. The torque is also unsaturated - 14 Nm. The type of battery used for power supply is Ni-Cd, with a capacity of 1 Ah and a voltage of 12 V.

Kolner KCD 12M

Cordless screwdriver KRÜGER KD-18Li

The drill-driver of the German brand Kruger demonstrates excellent technical characteristics. The capacity of the lithium-ion battery is 4000 mAh, which is considered a very high figure for such a tool. KRÜGER KD-18Li works in the modes of drilling and impact, also with its help, screwing / unscrewing of fasteners is performed. The number of revolutions is high - 1500 per minute.

Cordless drill screwdriver

The Kruger cordless screwdriver comes with a charger that charges the device in just 1 hour. Illumination of the working area is provided, which allows you to use the tool in places with poor lighting. The reverse function increases the safety of the device. If necessary, it will be easy to remove the stuck drill. The tool comes in a handy compact case.

How professional models differ from household

A professional tool is focused on performing large volumes of work and often not in the best weather and external conditions. Therefore, manufacturers are trying to equip this type of devices with more powerful engines, durable units and housings, as well as increased ergonomics.

In this regard, any professional tool will be in a higher price range than a household one. Which screwdriver to choose for the home? It all depends on the budget. If you are ready to spend a large amount, then you can look towards professional models. True, it is worth remembering that the tool will rarely be used, and large investments will simply lie in the pantry.

Rating of professional cordless screwdrivers - which is better

What characteristics should a professional screwdriver have? First, power and not a small headroom. Secondly, it should be comfortable for long-term work. Thirdly, the battery should last for a long time. It is also desirable to have several additional options - a case, a pair of batteries, light and other additional "buns". Let's see what the market offers us. The relevance of the presented rating of cordless drills-screwdrivers - 2019.

Makita DHP481RTE

A very interesting version of a professional tool. In addition to rotating operations, there is a chiseling function with a declared number of beats per minute - 31500. The rotational speed is also at a decent level - 2100 rpm. The maximum torque is 115 Nm. A lithium-ion battery with a capacity of 5 Ah and a voltage of 18 V. Interestingly, the charger can charge the battery in less than an hour.

Makita DHP481RTE

Dewalt DCD780M2

This model is capable of rotating speeds up to 2000 rpm. The torque is 60 Nm. If necessary, you can reduce the rotation speed by turning the switch to the reduced mode. The device uses a lithium-ion battery with a capacity of 4 Ah. The working voltage is 18 V.

Dewalt DCD780C2

Hitachi DS14DSAL

Hitachi's model represents the average level among the entire ranking. The maximum number of revolutions does not exceed 1500. The torque is 45 Nm. Additional options include electronic speed control, a backlight lamp and a power button lock. The included battery is a 14.4V lithium-ion battery.

Hitachi screwdriver

Metabo BS 18 LTX Impuls 2013 4 Ah

This screwdriver is strikingly similar in design to some of the Bosch models. But at the same time it has good characteristics. The maximum rotational speed is 1700 rpm. The torque is more than sufficient - 110 Nm. The battery is capacious, 4 Ah, type - lithium-ion. Operating voltage −18 V.

Metabo BS 18

Bosch GSR 18 V-EC 2016 5 Ah

Professional model from a well-known brand with improved performance. The number of revolutions is 1700, the torque is 60 Nm. As the name implies, the battery has a capacity of 5 Ah, is made using lithium-ion technology and produces 18 V. You can charge it with the original charger in less than an hour. The set includes a second battery and a convenient carrying case.

Bosch GSR 18 V-EC 2016 5 AhL

Rating of cordless screwdrivers for reliability

The reliability and durability of the screwdriver is the guarantee of its stable operation for a long time. It is worth considering that the more reliable the tool, the more economically profitable its use will be over time. Let's take a look at a few models that can be considered the most durable.

Bosch GSR 1440 Li

An excellent and inexpensive representative of the class of a professional tool. It has two speed modes. At high it can develop a rotation speed of up to 1400 rpm. The torque is approximately 30 Nm. The battery for the Bosch GSR 1440 Li screwdriver is not so capacious - only 1.5 Ah. However, there is a second battery in the kit to replace it. The voltage is 14.4 V.

Bosch GSR 1440 Li

Hitachi DS18DFL

Medium but hardy screwdriver model. The rotation speed is only 1200 rpm with a torque of 41 Nm. Two batteries with a capacity of 1.5 Ah and a voltage of 18 V will allow continuous operation for a long time.

Hitachi screwdriver

Dewalt DCD790D2

This model uses a special brushless motor mechanism. This ensures longer battery life and overall durability. As for the technical parameters, they should be enough for most tasks, both at large facilities and in everyday life. The number of revolutions per minute is 2000 with a torque of 70 Nm. The battery capacity is 2 Ah, the voltage is 18 V. The technology is lithium-ion. The kit includes a second battery.

Dewalt screwdriver

Best screwdriver 18 volt

Makita DHP482Z

Self-contained impact drill / driver with 18 volt battery. It can work at two speeds: for drilling and for working with fasteners. Keyless chuck with a diameter of 0.8-13 mm provides quick tool change without special tools. The torque of 62 Nm is enough to make a hole not only in drywall or wood, but also in metal. To facilitate work in poor lighting conditions, LED backlighting is provided. The price of the issue is only 6990 rubles.

Screwdriver Makita DHP482Z

How much does a good screwdriver cost: comparison chart

We have collected all reviewed models in one table for comparison. It may be more convenient for you to choose the most suitable tool.

Photo	Characteristics	Price, rubles
	Maximum number of revolutions: 600. Torque: 28 Nm. Battery type: Ni-Cd. Capacity: 1.3 Ah. Voltage: 12V. Engine brake, reverse, backlight, button lock. One battery included.	From 1 500
	Maximum number of revolutions: 1400. Torque: 28 Nm. Battery type: Li-Ion. Capacity: 1.5 Ah. Voltage: 12V. Engine brake, reverse, backlight, button lock. One battery included, case, spindle fixation, two speeds.	From 2 800
	Maximum number of revolutions: 550. Torque: 17 Nm. Battery type: Li-Ion. Capacity: 1.3 Ah. Voltage: 10.8 V. Reverse, backlight lamp, button lock. One battery included, spindle lock.	From 4 600
	Maximum number of revolutions: 1700. Torque: 30 Nm. Battery type: Li-Ion. Capacity: 1.3 Ah. Voltage: 10.8 V. Reverse, backlight lamp, button lock. No battery included. Spindle fixation, two working speeds.	From 4000
	Maximum number of revolutions: 550. Torque: 8 Nm. Battery type: Ni-Cd. Capacity: 1 Ah. Voltage: 12V. Reverse, backlight lamp, button lock. One battery included, spindle lock.	From 1 400
	Maximum number of revolutions: 2100. Torque: 115 Nm. Battery type: Li-Ion. Capacity: 5 Ah. Voltage: 18 V. Shock function, reverse, backlight, button lock. Two batteries included, spindle fixation, case.	From 28 600
	Maximum number of revolutions: 2000. Torque: 60 Nm. Battery type: Li-Ion. Capacity: 4 Ah. Voltage: 18 V. Reverse, backlight lamp, button lock. Two batteries included, spindle fixation, case.	From 20,000
	Maximum number of revolutions: 1500. Torque: 45 Nm. Battery type: Li-Ion. Capacity: 4 Ah. Voltage: 14.4 V. Reverse, backlight lamp, button lock. One battery included, spindle fixation, case.	From 16,000
	Maximum number of revolutions: 1700. Torque: 110 Nm. Battery type: Li-Ion. Capacity: 4 Ah. Voltage: 14.4 V. Reverse, backlight lamp, button lock. No battery included, spindle fixation, case.	From 11 100
	Maximum number of revolutions: 1900. Torque: 60 Nm. Battery type: Li-Ion. Capacity: 5 Ah. Voltage: 18 V. Reverse, backlight lamp, button lock. Two batteries included, spindle fixation, case.	From 11 100
	Maximum number of revolutions: 1400. Torque: 30 Nm. Battery type: Li-Ion. Capacity: 1.5 Ah. Voltage: 14.4 V. Reverse, backlight lamp, button lock. Two batteries included, spindle fixation, case.	From 6 600
	Maximum number of revolutions: 1200. Torque: 41 Nm. Battery type: Li-Ion. Capacity: 1.5 Ah. Voltage: 18 V. Reverse, backlight lamp, button lock. Two batteries included, spindle fixation, case.	From 10 500
	Maximum number of revolutions: 2000. Torque: 70 Nm. Battery type: Li-Ion. Capacity: 2 Ah. Voltage: 18 V. Reverse, backlight lamp, button lock. Two batteries included, spindle fixation, case.	From 17,000

If you have already come across the purchase of the tool, then you can share your experience in the comments with other users. Perhaps this will help someone understand which screwdriver is better to buy for home or professional needs.